View Single Post
Old 03-10-2013, 01:08 PM   #4
67ChevyRedneck
Hittin E-Z Street on Mud Tires
 
67ChevyRedneck's Avatar
 
Join Date: Nov 2004
Location: Greenville, SC
Posts: 23,090
Re: 1967 Mustang Coupe Build (Electra)

Cool car. Must have been a maaco paint job? 2000 wasn't that long ago.

Since you already have a 3 speed, I would look into a T5 swap, especially since it sounds like you'll be driving it quite a bit. Check the rear end ratio, if it's too high (like a 2.8) you'll probably want to put in something in the 3.3+ range. My car is a 289/C4/2.8 which is a great non overdrive set up because the high rear end gives me decent mileage (14-15mpg). But the car is also slooooooow. With an overdrive, you can steepen the rear gears for more acceleration power, but it's also necessary so the engine isn't lugging in overdrive. If I ever get back to my Firebird project, it's going to have a Pontiac 400 with a tremec 5 speed and 3.55 posi rear.

And if your car has the single master cylinder reservior... GET RID OF IT! If you loose ANY brake line, hose, etc, you'll lose ALL the brakes. My upgrade kit is sitting in the garage, I need to get mine swapped out too.
__________________
Jesse James
1967 C10 SWB Stepside: 350/700R4/3.73
1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc
1968 Pontiac Firebird: Project Fire Chicken!
2015 Silverado Double Cab 5.3L Z71
2001 Jeep Wrangler Sport 4.0L 5spd
2020 Chevrolet Equinox Premium 2.0L Turbo
2011 Mustang V6 ~ Wife's ride
American Born, Country by the Grace of God
1967 CST Shop Truck Rebuild!
My 1967 C-10 Build Thread
My Vintage Air A/C Install
Project "On a Dime"
Trying my hand at Home Renovation!
1965 Mustang Modifications!
67ChevyRedneck is offline   Reply With Quote