View Single Post
Old 07-21-2016, 12:34 AM   #1
XADom13
Registered User
 
XADom13's Avatar
 
Join Date: Jun 2013
Location: La Verne, CA
Posts: 17
Lokar Shift Linkage from Column Shifter to 4L60E

Hey guys, I am at that point of connecting the old and new of my truck. I am building a '72 Longhorn, named Adrenalin Fix and have finally settled the 5.3 LS and 4L60e into the truck and need to connect the late model trans to the original column shifter. All that I have read says the stock column I have is the right shift orientation and I bought a Lokar shift linkage kit that is supposed to work with my setup.

I have since looked at the setup of the '02 Tahoe that was the donor for the engine and trans and it has a cable shifter. The cable is routed coming in from the rear of the vehicle to the shift bar on the driver's side of the trans.

Do you guys know if the mechanical linkage is the right way to go, or do I need to do something different? This is all new to me. Sorry for the simple question. If there is another thread that might explain this in detail it would be greatly appreciated.

Thanks in advance!
XADom13 is offline   Reply With Quote