The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

washington blue · 03-11-2018, 11:59 PM

I rolled the Firebird subframe under the 55 and after a lot of measuring front to back, side to side, and X measurements I eventually got them all the same. I have been measuring from the square tubing forward to the string and to the 4 A arm bolts, both straight front to rear, and also X measuring the 4 A arm bolts to the tubing. The 4 bolts are the ones that have shims for alignment on them. I don't know if there is anywhere else I should measure from.

03-11-2018, 11:59 PM	#52
washington blue Registered User Join Date: Mar 2016 Location: Not far from Sioux Falls South Dakota Posts: 325	Re: norms 55 chevy pu build I rolled the Firebird subframe under the 55 and after a lot of measuring front to back, side to side, and X measurements I eventually got them all the same. I have been measuring from the square tubing forward to the string and to the 4 A arm bolts, both straight front to rear, and also X measuring the 4 A arm bolts to the tubing. The 4 bolts are the ones that have shims for alignment on them. I don't know if there is anywhere else I should measure from. Attached Images