The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

BarryB · 01-15-2011, 01:35 AM

Thanks guys, basically we want the truck to pull good. And if your going to spend the xtra in gas the 350 uses, might as well put in a BB. The 366 we have already, the 454 might be a hard one to get ahold of. We'll see what I find out on the 454.

My thinking was, the 366 was put in the bus for a reason, pulling around a fairly heavy load. So thought in a 1 ton truck it should do even better. BUT i haven't messed with BB much. I know we could make a stroker motor, but that isn't in the funds.

01-15-2011, 01:35 AM	#7
BarryB Senior Member Join Date: Jul 2006 Location: Blountville, Tn. Posts: 3,904	Re: Can I change out a 350 sb for a 366? Thanks guys, basically we want the truck to pull good. And if your going to spend the xtra in gas the 350 uses, might as well put in a BB. The 366 we have already, the 454 might be a hard one to get ahold of. We'll see what I find out on the 454. My thinking was, the 366 was put in the bus for a reason, pulling around a fairly heavy load. So thought in a 1 ton truck it should do even better. BUT i haven't messed with BB much. I know we could make a stroker motor, but that isn't in the funds. __________________ We could learn a lot from crayons... Some are sharp; some are pretty;and some are dull. Some have weird names; and all are different colours;but they all have to live in the same box. You may be only one person in the world, But you may also be the world to one person. * Some mistakes are too much fun to only make once. Two rules in life. 1. Never sweat the small stuff! 2. Everything is small stuff!