The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - WA 70 Front Crosssmember With After Market Disc Brake Conversion

Layrokr · 09-10-2013, 07:05 PM

I have a 70 front cross member which has been modified as well as the factory a-arms which have been modified by a local shop. (The Drop Shop)
The a-arm modification gives them a 2 inch drop. New ball joints were installed along with the aftermarket disc brake kit. The kit was installed then sat in a shop for over a year. There is some surface rust on the rotors and one of the rubber ball joint cups was damaged. Springs are factory and I believe they were cut by the previous owner. I would like $600 for everything. I can send pics if you are interested.

09-10-2013, 07:05 PM	#1
Layrokr Registered User Join Date: Nov 2007 Location: Vancouver, Wa. Posts: 70	70 Front Crosssmember With After Market Disc Brake Conversion I have a 70 front cross member which has been modified as well as the factory a-arms which have been modified by a local shop. (The Drop Shop) The a-arm modification gives them a 2 inch drop. New ball joints were installed along with the aftermarket disc brake kit. The kit was installed then sat in a shop for over a year. There is some surface rust on the rotors and one of the rubber ball joint cups was damaged. Springs are factory and I believe they were cut by the previous owner. I would like $600 for everything. I can send pics if you are interested.