The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**aotte1** · 03-17-2021, 11:23 PM

Parts ceramic coated. Coat with ceramic medium, to preserve the parts. It provides a very tough coating if done following instructions, minimize moisture. Low humidity, media clean 120 grit, ceramic costing ready and following grit blasting immediately coat. Photos 1, 2, and 3 are general, showing bolts, washers, and few other parts. These parts are for rear shocks, transfer case mounting bolts, etc. Last two photos are of the upper rear shock bolts ( 4WD). Head marking “C” grade 5.

03-17-2021, 11:23 PM	#47
aotte1 Senior Member Join Date: Oct 2013 Location: lousiville Ky Posts: 2,637	Re: 1966 GMC K10 Suburban Project Parts ceramic coated. Coat with ceramic medium, to preserve the parts. It provides a very tough coating if done following instructions, minimize moisture. Low humidity, media clean 120 grit, ceramic costing ready and following grit blasting immediately coat. Photos 1, 2, and 3 are general, showing bolts, washers, and few other parts. These parts are for rear shocks, transfer case mounting bolts, etc. Last two photos are of the upper rear shock bolts ( 4WD). Head marking “C” grade 5. Attached Images Last edited by aotte1; 03-17-2021 at 11:30 PM.