|
Re: 250 Power Steering Pulley Help
Quote:
Originally Posted by Jason Banks
I've been looking at power steering pumps online and can't find anything referencing different lengths of snout on the pump housings.
I'm convinced that the pumps with the press on pulleys were designed to line up with the different balancer and water pump pulleys that have the gap in the middle. I did a quick look on ebay and the balancers are available, but didn't see any of the water pump pulleys. Seemed like it was easily gonna cost a couple hundred dollars to go that way.
I'd try a 2 groove press on pulley like this:
https://www.amazon.com/Dorman-300-12.../dp/B000E321ZU
That's the cheapest I could find it. Also known as GM PN 14084343 if you want to look. Thought it might be better to pay more and buy locally so you could return it, if it didn't work. |
It's worth a shot, thanks.
__________________
Die with memories, not dreams.
Not to brag, but I don't need alcohol to make really bad decisions.
1969 GMC Short Step Side
|