The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

bubbasimms · 09-10-2020, 08:34 PM

I just put one on my 69. I have 2 1/2 drop spindles and airbags. I had to use the brackets for non- lowered trucks, ie the taller brackets, and then no spacer on the end links. My end links have only a top washer then rubber bushing, then sway bay then rubber bushing then lower control arm then rubber bushing then washer. If that makes sense. The sway bar is pretty level at ride height and travels from full air up to full air down smoothly.

09-10-2020, 08:34 PM	#2
bubbasimms Registered User Join Date: Nov 2010 Location: Hollister Mo Posts: 137	Re: sway bar I just put one on my 69. I have 2 1/2 drop spindles and airbags. I had to use the brackets for non- lowered trucks, ie the taller brackets, and then no spacer on the end links. My end links have only a top washer then rubber bushing, then sway bay then rubber bushing then lower control arm then rubber bushing then washer. If that makes sense. The sway bar is pretty level at ride height and travels from full air up to full air down smoothly.