The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - 47-55.1 1953 3100 "Honey-do"

rnrdthefox · 07-12-2021, 04:15 PM

Thanks for the comments guys.

Probably time for another update. Looks like it's been about a month now.

My headers finally came in so I was able to get the steering linkage put together. Made a short double D shaft for the end of the stock shaft to the second u-joint and attached it.

The ID for the stock shaft was slightly larger than 3/4" so the ends are slightly different sizes.

07-12-2021, 04:15 PM	#68
rnrdthefox Registered User Join Date: Feb 2020 Location: Boulder, CO Posts: 221	Re: 1953 3100 "Honey-do" Thanks for the comments guys. Probably time for another update. Looks like it's been about a month now. My headers finally came in so I was able to get the steering linkage put together. Made a short double D shaft for the end of the stock shaft to the second u-joint and attached it. The ID for the stock shaft was slightly larger than 3/4" so the ends are slightly different sizes. Attached Images Last edited by rnrdthefox; 10-07-2021 at 06:16 PM.