Keeping up on the progress. Spent the week working on the tailgate and rocker. Finally got the rocker fitting pretty solid. Threw the door on for a quick check and then did the plug welds. I'll get the bottom lip when I flip the cab for undercoating.
Welded up the spot weld holes and trim holes on the outer skin of the tailgate. I also got a tailgate handle relocater kit off eBay, so I'll plan on welding the filler patch this next week.
This weekend I went and visited my parents and was able to pick up some more supplies for the bodywork. Got home and finished sanding the back inside the cab. Lastly, I started putting some body filler on my inner passenger door skin. Where I welded the patch panel in there was a slight high spot. It looks like with a little body filler I'll be able to blend it in.
Plug welds on the Dr rocker. I'll add one more on top and all the bottom lip when I flip cab.
Driver door fits nicely.
You can see where the high spot is on the pan door where the patch panel was welded in.
Back of cab is ready for high-build.
Here is my dad's 68 Camaro project he has had for awhile. Was helping him replace the floor pan while I visited him down in Pullman.
