The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Marc_b · 04-10-2021, 04:09 PM

The rear was not as easy to line up as the front and required a little massaging to get into place. But the panels were not perfectly straight to start with.

Name: E2BC03FF-3CB0-4DF9-8D15-673F1C2E1C81_1_201_a.jpg
Views: 558
Size: 82.8 KB

Name: E2BC03FF-3CB0-4DF9-8D15-673F1C2E1C81_1_201_a.jpg
Views: 558
Size: 82.8 KB

Name: E4CA876C-B50F-47DD-A0CE-379541C7E3E7_1_201_a.jpg
Views: 566
Size: 90.1 KB

Name: 44BA012E-8C8E-4442-A670-57D657106EB0_1_201_a.jpg
Views: 573
Size: 49.9 KB

Name: 8CAC6183-4A4E-4986-97A6-DC68B885FE6D_1_201_a.jpg
Views: 592
Size: 66.2 KB

Name: E5AC10F8-C3B8-4E40-9ECB-B3DF632BDF58_1_201_a.jpg
Views: 571
Size: 50.2 KB

04-10-2021, 04:09 PM	#7
Marc_b Registered User Join Date: Oct 2013 Location: Livermore, ca Posts: 27	Re: C10 Bay Area build The rear was not as easy to line up as the front and required a little massaging to get into place. But the panels were not perfectly straight to start with.