[Southcity]

I run a 700R4 and am running a throttle rod on my setup. I used the original gas pedal assembly at the firewall (same as yours) but then used a swedged aluminum throttle rod with heim joints from there to carb. Purchased the aluminum rod and heim joints at Speedway. For the throttle heim joints, you would get a right and left hand thread so you can easily adjust. Don't forget the jam nuts!

Swedged throttle rods:
https://www.speedwaymotors.com/Searc...wedged%20tubes

Throttle heim Joints:
https://www.speedwaymotors.com/Steel...tud,34302.html

Jam nuts:
https://www.speedwaymotors.com/Searc...art:Jam%20Nuts