The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**Gregski** · 06-04-2023, 07:03 PM

is he back from the dead?

Electric Truck Update

I think I need a friggen list to remember where I left off and what WE need to do moving forward, this is not in any order:

1. get one of the iBooster brake system to work finally (I now own three of 'em)

2. reassembly the Prius steering assist (I got this working but ripped it all apart to get to work on the brakes see #1 above)

3. hire a specialist (as you call them across the pond) to install a windshield [ahem] windscreen?

4. drop off the Smurf bucket seats at an upholsterer to cover them in some black cow skin

5. Plumb the Inverter, Gear box, (and charger and DC/DC converter, depending on which ones I decide to go with)

6. Reassemble the BMW safety box with a Isabellenhütte Heusler current shunt aka pre charge circuit

7. Wiretize all the low voltage wiring

8. Wiretize all the high voltage orange wiring

9. Install an aftermarket B&M floor shifter, that's been sitting on my garage shelf collecting dust

10. Install some digital gauges (I am having our good forum friend Artur fandangle for me)

I think that plus a million small things and a dozen things I forgot should do it

06-04-2023, 07:03 PM	#1523
Gregski Post Whore Join Date: Aug 2014 Location: Sacramento, CA Posts: 10,803	Re: My Dusty 71 GMCe Electruck is he back from the dead? Electric Truck Update I think I need a friggen list to remember where I left off and what WE need to do moving forward, this is not in any order: 1. get one of the iBooster brake system to work finally (I now own three of 'em) 2. reassembly the Prius steering assist (I got this working but ripped it all apart to get to work on the brakes see #1 above) 3. hire a specialist (as you call them across the pond) to install a windshield [ahem] windscreen? 4. drop off the Smurf bucket seats at an upholsterer to cover them in some black cow skin 5. Plumb the Inverter, Gear box, (and charger and DC/DC converter, depending on which ones I decide to go with) 6. Reassemble the BMW safety box with a Isabellenhütte Heusler current shunt aka pre charge circuit 7. Wiretize all the low voltage wiring 8. Wiretize all the high voltage orange wiring 9. Install an aftermarket B&M floor shifter, that's been sitting on my garage shelf collecting dust 10. Install some digital gauges (I am having our good forum friend Artur fandangle for me) I think that plus a million small things and a dozen things I forgot should do it Attached Images Last edited by Gregski; 06-05-2023 at 10:16 AM.