Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
08-26-2012, 01:18 PM | #1 |
Registered User
Join Date: Mar 2002
Location: Forney TX
Posts: 4,512
|
Whistle coming from carb area?
Ok so I changed intake gaskets on my sbc and everything went well bolted the carb on hooked everything up then fired right up. After the temp came up some it started to squeal. Hit the gas it goes away for a split second. Also seems like the carb is sucking alot more air through itself. I made sure it wasn't a belt or anything else and even tried the carb cleaner around the carb and no change. So do I need to pull the intake again or any other ideas??? Need help fast.
Posted via Mobile Device
__________________
Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274 |
08-26-2012, 01:43 PM | #2 |
Registered User
Join Date: May 2010
Location: Lewis County, WA
Posts: 1,523
|
Re: Whistle coming from carb area?
Vacuum leak. Did you spray the throttle shaft on the carb? Got a crack in a vacuum line or cap? What kind of carb?
|
08-26-2012, 01:47 PM | #3 | |
Registered User
Join Date: Mar 2002
Location: Forney TX
Posts: 4,512
|
Re: Whistle coming from carb area?
Quote:
Posted via Mobile Device
__________________
Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274 |
|
08-26-2012, 02:00 PM | #4 |
Senior Member
Join Date: Jan 2003
Location: daytonabeach
Posts: 22,956
|
Re: Whistle coming from carb area?
was the mounting surface cleaned and a new gasket used on the carb and torqued in place properly?
__________________
71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY |
08-26-2012, 02:33 PM | #5 |
Registered User
Join Date: Mar 2002
Location: Forney TX
Posts: 4,512
|
Re: Whistle coming from carb area?
Yes tried two different gaskets on the carb/intake thick and thin.
Posted via Mobile Device
__________________
Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274 |
08-26-2012, 02:44 PM | #6 |
I built it
Join Date: Sep 2008
Location: Bakersfield ca
Posts: 744
|
Re: Whistle coming from carb area?
did you spray on the intake to head mounting? it can leak there too
__________________
'72 k10 lwb 454, th400, 205, d44ft, 12b rear, 4in skyjacker, 35x12.5-15 superswampers, 4.56, blazer tank. painless wiring harness '98 dodge 3500 12v 5sp 4x4. the truck that actually runs |
08-26-2012, 02:51 PM | #7 | |
Registered User
Join Date: Mar 2002
Location: Forney TX
Posts: 4,512
|
Re: Whistle coming from carb area?
Quote:
Posted via Mobile Device
__________________
Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274 |
|
08-26-2012, 03:51 PM | #8 |
Registered User
Join Date: Aug 2009
Location: Bowser
Posts: 13,533
|
Re: Whistle coming from carb area?
Where's your vacuum advance hooked to?
|
08-26-2012, 05:33 PM | #9 |
Registered User
Join Date: May 2010
Location: Lewis County, WA
Posts: 1,523
|
Re: Whistle coming from carb area?
|
08-26-2012, 06:15 PM | #10 |
Registered User
Join Date: Mar 2002
Location: Forney TX
Posts: 4,512
|
Re: Whistle coming from carb area?
Funny.... Been on there for three years and no problems..
Posted via Mobile Device
__________________
Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274 |
08-26-2012, 06:17 PM | #11 |
Registered User
Join Date: Mar 2002
Location: Forney TX
Posts: 4,512
|
Re: Whistle coming from carb area?
Manifold vacume on pass front of carb other port blocked. PVC off back of carb to valve cover and if you unplug the line no change.
Posted via Mobile Device
__________________
Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274 |
08-26-2012, 06:35 PM | #12 |
Registered User
Join Date: Aug 2009
Location: Bowser
Posts: 13,533
|
Re: Whistle coming from carb area?
Hook it up to ported vacuum. Increase your idle a bit. My truck whistles too!
Mines hooked to manifold too but it runs so much better like that. See if that changes it. |
08-26-2012, 07:02 PM | #13 |
Registered User
Join Date: May 2010
Location: Lewis County, WA
Posts: 1,523
|
Re: Whistle coming from carb area?
|
08-26-2012, 08:13 PM | #14 | ||
Registered User
Join Date: Mar 2002
Location: Forney TX
Posts: 4,512
|
Re: Whistle coming from carb area?
Quote:
Quote:
Posted via Mobile Device
__________________
Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274 |
||
08-26-2012, 08:14 PM | #15 |
Registered User
Join Date: Mar 2002
Location: Forney TX
Posts: 4,512
|
Re: Whistle coming from carb area?
Going to try another carb( Holley) tomarrow and if no change looks like the intake is coming back off
Posted via Mobile Device
__________________
Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274 |
08-26-2012, 08:44 PM | #16 | |
Registered User
Join Date: May 2010
Location: Lewis County, WA
Posts: 1,523
|
Re: Whistle coming from carb area?
Quote:
And I was being kind of a dick, you were right. Crappy day, over it now. That is my suggestion. Look over the mating surfaces real close, maybe even with a straight edge on the carb base and carb pad on the manifold? |
|
08-26-2012, 09:23 PM | #17 | |
Registered User
Join Date: Mar 2002
Location: Forney TX
Posts: 4,512
|
Re: Whistle coming from carb area?
Quote:
Posted via Mobile Device
__________________
Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274 |
|
08-27-2012, 02:46 AM | #18 |
Fabricate till you "puke"
Join Date: Jun 2002
Location: Ill
Posts: 9,403
|
Re: Whistle coming from carb area?
I dont "bash" anybodys carbs....have run em all, & they all tune a tick differenty. But here goes.....you do not have a vac leak, properly stated, its an AIR leak You might find it in the intake gaskets....but most likely, you will find it under the carb! If it were mine, I would warm the engine(not really hot, but not cold)......shoot a little brake clean or starting fluid around the suspected spots, you will find the air leak. If you play with starting fluid, be VERY carefull! crazyL
__________________
69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears.... |
08-27-2012, 08:51 AM | #19 |
My Carbon Footprint
Join Date: Oct 2008
Location: Orygun
Posts: 5,527
|
Re: Whistle coming from carb area?
It "should" be the throttle plates. Of course this is shooting from the hip as I sit on my couch. I have had one or two carbs do this and was able to eliminiate the problem by resetting the throttle plates (which I don't recommend you do if you are not familiar with these carbs. I have also swapped out bases and had the problems go away. It usually only happens at one specific RPM right? Now that I think about it, do that carb have the idleze setup on it?
|
08-27-2012, 10:51 AM | #20 |
Registered User
Join Date: Jul 2006
Location: Ozark, MO
Posts: 4,887
|
Re: Whistle coming from carb area?
All three of the last Demon carbs I ran had the "whistle" and I chalked it up to the design of the venturies and boosters. There were no vacuum leaks on mine. That was the least of my worries, the eye-burning rich idle circuit on each of them was the nail in the coffin.
__________________
'20 Silverado Trail Boss ~ '17 Tahoe ~ '79 K15 Sierra Grande ~ '76 Blazer 2wd ~ '71 Cheyenne swb ~ '55 Pontiac Safari ~'50 3100 bagged ~ '80 Wife ~ Late model kids
|
08-27-2012, 11:37 AM | #21 |
My Carbon Footprint
Join Date: Oct 2008
Location: Orygun
Posts: 5,527
|
Re: Whistle coming from carb area?
It can be a problem with Holleys too. When I said I have had one or two do it, I was talking about Holleys. When the blades are just cracked open, there can be the perfect distance between the wall of the throttle bore and the blade to make a slight sound. Not guaranteeing this is your problem, but I know it can happen. You can also check to see if your plates are aligned. Assuming the transfer slots are cut the same, and I wouldn't be surprised if they weren't on a BG, they "should" (butterflies) hit the transfer slots in the exact same spot on each side. Surprising how many carbs are not hitting each slot in the same place.
|
09-03-2012, 10:21 PM | #22 |
Registered User
Join Date: Mar 2002
Location: Forney TX
Posts: 4,512
|
Re: Whistle coming from carb area?
Sorry haven't updated but the leak was coming from the rear of the intake. Apperantly it didn't seal well so since I had to take it off again I put on my Holley street dominator intake and some new gaskets and a few days later fired it up and no whistle! So not the carb... Thank god! Didn't want that bill...
Posted via Mobile Device
__________________
Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274 |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|