67-72 bench seat console/cupholder - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**MikeB** · 01-22-2022, 03:46 PM

Does someone on this forum sell these? I want to be 100% sure the length and color are right for my truck.

**dave6672** · 01-22-2022, 10:33 PM

Here's a link to where you can get them. They are on Amazon and ebay as well. I have the short version in my truck so that it doesn't interfere with the shifter.

https://www.cupholdersplus.com/bench-seat-consoles.html

**TKCR** · 01-22-2022, 10:45 PM

I got mine from Classic consoles.com. Mine is called the Drinkster. But it fits perfectly on the bench seat.

tutone · 01-23-2022, 05:38 PM

I have the shorter version in my 55 sedan. Roughly 15" from end to end. Bought it at a show on a "twofer" deal. Only complaint is that the vinyl to vinyl gives off a little squeaking. I just placed a rag in between it and the seat. Problem solved.

**MikeB** · 01-23-2022, 09:15 PM

Thanks for the all the info. I just ordered some color samples from Classic Consoles.

**TKCR** · 01-23-2022, 10:25 PM

Quote:

Originally Posted by MikeB

Thanks for the all the info. I just ordered some color samples from Classic Consoles.

Back when I got mine, I actually sent them left over vinyl from my seat cover, they used it to make my console. I don’t know if they still do that.

01-22-2022, 03:46 PM	#1
MikeB Senior Member Join Date: Jul 2000 Location: North Texas Posts: 3,438	67-72 bench seat console/cupholder Does someone on this forum sell these? I want to be 100% sure the length and color are right for my truck. __________________ Mike 1969 C10 LWB -- owned for 34 years. 350/TH350, 3.08 posi, 1st Gen Vintage Air, AAW wiring harness, 5-lug conversion, 1985 spindles and brakes. 1982 C10 SWB -- sold 1981 C10 Silverado LWB -- sold, but wish I still had it! 1969 C10 (not the current one) that I bought in the early 1980s. Paid $1200; sold for $1500 a few years later. Just a hint at the appreciation that was coming. Retired as a factory automation products salesman. Worked part-time over the years for an engine builder and a classic car repair shop. Member here for 23 years! This is the very first car/truck Internet forum I joined. I still used a dial-up modem back then!

01-22-2022, 10:33 PM	#2
dave6672 Senior Member Join Date: Jul 2008 Location: Carrollton, KY Posts: 1,177	Re: 67-72 bench seat console/cupholder Here's a link to where you can get them. They are on Amazon and ebay as well. I have the short version in my truck so that it doesn't interfere with the shifter. https://www.cupholdersplus.com/bench-seat-consoles.html Attached Images __________________ Dave R. 1972 K20 1972 C20 Highlander 1957 Chevy 210 Delray 1967 C10

01-22-2022, 10:45 PM	#3
TKCR Senior Member Join Date: Oct 2014 Location: Ohio Posts: 6,868	Re: 67-72 bench seat console/cupholder I got mine from Classic consoles.com. Mine is called the Drinkster. But it fits perfectly on the bench seat. Attached Images __________________ FB Page for my Seats Belts https://www.facebook.com/73-87-Chevy...9439407476735/ Restoring Seatbelts: http://67-72chevytrucks.com/vboard/s...d.php?t=809750 SOLD My 86 Build:http://67-72chevytrucks.com/vboard/s...d.php?t=654972 Past Restored Bench Seats:http://67-72chevytrucks.com/vboard/s...d.php?t=715398 PayPal link to pay for your items: https://www.paypal.me/TKCR

01-23-2022, 05:38 PM	#4
tutone Registered User Join Date: Mar 2016 Location: hickory, ky Posts: 1,257	Re: 67-72 bench seat console/cupholder I have the shorter version in my 55 sedan. Roughly 15" from end to end. Bought it at a show on a "twofer" deal. Only complaint is that the vinyl to vinyl gives off a little squeaking. I just placed a rag in between it and the seat. Problem solved. Attached Images __________________ :My build thread http://67-72chevytrucks.com/vboard/s...d.php?t=807535 1972 K10 swb/1968 Camaro 350/4spd 1955 210 2 dr sedan/1998 RCSB Z71

01-23-2022, 09:15 PM	#5
MikeB Senior Member Join Date: Jul 2000 Location: North Texas Posts: 3,438	Re: 67-72 bench seat console/cupholder Thanks for the all the info. I just ordered some color samples from Classic Consoles. __________________ Mike 1969 C10 LWB -- owned for 34 years. 350/TH350, 3.08 posi, 1st Gen Vintage Air, AAW wiring harness, 5-lug conversion, 1985 spindles and brakes. 1982 C10 SWB -- sold 1981 C10 Silverado LWB -- sold, but wish I still had it! 1969 C10 (not the current one) that I bought in the early 1980s. Paid $1200; sold for $1500 a few years later. Just a hint at the appreciation that was coming. Retired as a factory automation products salesman. Worked part-time over the years for an engine builder and a classic car repair shop. Member here for 23 years! This is the very first car/truck Internet forum I joined. I still used a dial-up modem back then!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.