The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1947 - 1959 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 10-27-2015, 06:09 PM   #1
Tod59
Registered User
 
Join Date: Nov 2014
Location: Michign
Posts: 175
Tire/Original Rim?

Hey Guys,

Tire size and original rim questions:

Question #1: Do these look like original '59 rims to you? I have the original hub caps too, but just wondering if this is the rim that would have come on the truck originally in 1959?

If they do look original, what size were original rims in 1959? 15x?

Question #2: Depending on rim size, will a 275x60x15 tire fit on the rear of the fleetside (tucked under the fenders with an original rear end still in truck) on the rims in the picture below? I also have a set of 225's for the front in a barn ready to install based upon your opinions.

Thanks
Tod
Attached Images
  
Tod59 is offline   Reply With Quote
Old 10-27-2015, 06:30 PM   #2
OrrieG
Registered User
 
OrrieG's Avatar
 
Join Date: Jun 2006
Location: Idaho
Posts: 8,800
Re: Tire/Original Rim?

Everything you need to know about original tires and rims, from the link in my signature.
http://chevy.oldcarmanualproject.com...esto/56184.htm
__________________
1959 Chevy Short Fleetside w/ 74 4WD drive train (current project) OrrieG Build Thread
1964 Chevelle Malibu w/ 355-350TH (daily driver)
Helpful AD and TF Manual Site Old Car Manual Project
OrrieG is offline   Reply With Quote
Old 10-27-2015, 09:44 PM   #3
Tod59
Registered User
 
Join Date: Nov 2014
Location: Michign
Posts: 175
Re: Tire/Original Rim?

Thanks OrrieG, but I assume that the 56 chart you posted a link to is the same for 59? Honestly, I'm having a hard time deciphering the wheel information.....looks like 2 choices: 15x5 and 16x5?

Do you think the "tabs" to hold the hub caps in my picture are original or aftermarket?

By the way, nice build on your truck thread!
Tod59 is offline   Reply With Quote
Old 10-27-2015, 10:45 PM   #4
Foot Stomper
Registered User
 
Foot Stomper's Avatar
 
Join Date: Oct 2015
Location: Calgary, Alberta
Posts: 1,252
Re: Tire/Original Rim?

Tod59 I just went through this.

I have a 1959 GMC Shortbox Fleetside Deluxe and wanted to run stock wheels.

Here's what I learned... hope it helps!
Pre 56 trucks ran a 6 clip rim. These are 4.5" bead width. Between 56 and 59 GM offered a 15" or 16" with a 5" bead width AND three clip rims.

I purchased a new/uninstalled/used set of Coker 7.50 16R 107 tires for my project. They are being installed on my 16" 3 clip rims and then a joy ride to ensure clearances before frame off restoration starts.

At this point, I'm confident that my set up will work perfectly.

I'll post pictures after I recharge my phone battery. ... it's about to d
Foot Stomper is offline   Reply With Quote
Old 10-27-2015, 10:55 PM   #5
Foot Stomper
Registered User
 
Foot Stomper's Avatar
 
Join Date: Oct 2015
Location: Calgary, Alberta
Posts: 1,252
Re: Tire/Original Rim?

http://https://goo.gl/photos/jFxKUjkztmFwjGpj7

http://https://goo.gl/photos/NVg8VbQ9Xdfrn6Y99
Foot Stomper is offline   Reply With Quote
Old 10-27-2015, 11:24 PM   #6
Tod59
Registered User
 
Join Date: Nov 2014
Location: Michign
Posts: 175
Re: Tire/Original Rim?

I can't open these links on my phone or laptop?
Tod59 is offline   Reply With Quote
Old 10-28-2015, 12:24 AM   #7
Foot Stomper
Registered User
 
Foot Stomper's Avatar
 
Join Date: Oct 2015
Location: Calgary, Alberta
Posts: 1,252
Re: Tire/Original Rim?

Quote:
Originally Posted by Tod59 View Post
Hey Guys,

Tire size and original rim questions:

Question #1: Do these look like original '59 rims to you? I have the original hub caps too, but just wondering if this is the rim that would have come on the truck originally in 1959?

If they do look original, what size were original rims in 1959? 15x?

Question #2: Depending on rim size, will a 275x60x15 tire fit on the rear of the fleetside (tucked under the fenders with an original rear end still in truck) on the rims in the picture below? I also have a set of 225's for the front in a barn ready to install based upon your opinions.

Thanks
Tod
To me it looks like your picture is showing a 16" three clip which will have a 5" bead width.
Foot Stomper is offline   Reply With Quote
Old 10-28-2015, 10:45 PM   #8
Foot Stomper
Registered User
 
Foot Stomper's Avatar
 
Join Date: Oct 2015
Location: Calgary, Alberta
Posts: 1,252
Re: Tire/Original Rim?

Tod59 are you all squared away? problem solved?
Foot Stomper is offline   Reply With Quote
Old 10-28-2015, 11:28 PM   #9
Tod59
Registered User
 
Join Date: Nov 2014
Location: Michign
Posts: 175
Re: Tire/Original Rim?

Yes, thank you. Looks like I have the 15 inch rims with 3 tabs for the hub cap. I was confused because with a tape measure, it looks as if the rims are 16 inch......but......a little research indicates that rim diameter is actually measured from the "inside lip" or tire bead seal area on the rim proportionally across to the other side.

So I calculate the dimension to be 15 inch rims.

Thanks Footstomper for the pictures today. Your GMC Fleetside is very cool!!

Thanks everyone!
Tod59 is offline   Reply With Quote
Old 10-29-2015, 10:43 AM   #10
mr48chev
Registered User
 
mr48chev's Avatar
 
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,384
Re: Tire/Original Rim?

Here, you should be able to dig out the tire and wheel specs and any others you want from this link https://www.gmheritagecenter.com/doc...olet-Truck.pdf
__________________
Founding member of the too many projects, too little time and money club.

My ongoing truck projects:
48 Chev 3100 that will run a 292 Six.
71 GMC 2500 that is getting a Cad 500 transplant.
77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.
mr48chev is offline   Reply With Quote
Old 10-29-2015, 12:59 PM   #11
OrrieG
Registered User
 
OrrieG's Avatar
 
Join Date: Jun 2006
Location: Idaho
Posts: 8,800
Re: Tire/Original Rim?

Quote:
Originally Posted by Tod59 View Post
Yes, thank you. Looks like I have the 15 inch rims with 3 tabs for the hub cap. I was confused because with a tape measure, it looks as if the rims are 16 inch......but......a little research indicates that rim diameter is actually measured from the "inside lip" or tire bead seal area on the rim proportionally across to the other side.
Yes, measurement is at the bead line for diameter and width not edges. If anyone is interested Tire Rack has a good tutorial on tire sizes and decoding all the stuff on the sidewall. Also application information.
__________________
1959 Chevy Short Fleetside w/ 74 4WD drive train (current project) OrrieG Build Thread
1964 Chevelle Malibu w/ 355-350TH (daily driver)
Helpful AD and TF Manual Site Old Car Manual Project
OrrieG is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:55 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com