AZ Power Steering Pump & Brackets for a 250 6 cylinder - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mahanian · 01-26-2011, 12:38 AM

Power steering pump and all necessary brackets for a 6 cylinder 250 motor (lower alternator mount and alternator pulley is the same for PS and non-PS so not included. The water pump pulley has two grooves, the pictures doesn't show both very well. The first picture is my setup for sale, the following three pictures illustrate the layout of the brackets and pump. Asking $100 shipped

fishingjred73 · 01-26-2011, 09:13 AM

Do you know what year engine this came off of?

mahanian · 01-26-2011, 11:00 AM

I bought them off ebay thinking they would work on my 292 but they won't. The guy I bought them said he wasn't sure what year truck. I've asked around and was told they are for an integrated head 250.

fishingjred73 · 01-26-2011, 09:58 PM

Yeah I just picked up some brackets for my 81 250 with the integrated head off a 84, and noticed yours were a little different than mine. Thanks for the info. TTT for you.

72BlckButy · 01-26-2011, 10:15 PM

Quote:

Originally Posted by fishingjred73

Yeah I just picked up some brackets for my 81 250 with the integrated head off a 84, and noticed yours were a little different than mine. Thanks for the info. TTT for you.

Don't worry James.... it seems like GM had 1,000s of different configurations for the P/S on lines. It's a never ending battle to know if you have 'everything' you will need.

Back to the task at hand...

mahanian · 01-26-2011, 10:29 PM

I want these gone so I'll take a big hit, how about $100 shipped?

mahanian · 02-03-2011, 01:19 PM

ttt

mahanian · 02-14-2011, 12:13 AM

ttt

mahanian · 02-23-2011, 04:01 PM

Still available

ely71 · 03-19-2011, 04:46 PM

if you still have this bracket i would like to buy it

mahanian · 03-19-2011, 04:51 PM

PM sent

ronaldharris · 09-09-2011, 04:25 PM

Is the bracket still available?

ronaldharris · 09-09-2011, 04:54 PM

Is the bracket still available?

01-26-2011, 12:38 AM	#1
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Power Steering Pump & Brackets for a 250 6 cylinder Power steering pump and all necessary brackets for a 6 cylinder 250 motor (lower alternator mount and alternator pulley is the same for PS and non-PS so not included. The water pump pulley has two grooves, the pictures doesn't show both very well. The first picture is my setup for sale, the following three pictures illustrate the layout of the brackets and pump. Asking $100 shipped Attached Images Last edited by mahanian; 01-26-2011 at 10:30 PM. Reason: lowered price from $150 to $100 shipped

01-26-2011, 09:13 AM	#2
fishingjred73 Registered User Join Date: May 2007 Location: LOUISIANA Posts: 811	Re: Power Steering Pump & Brackets for a 250 6 cylinder Do you know what year engine this came off of? __________________ James '68 Stepside (ground up in progress) My 68 build thread http://louisianaclassictruckclub.fre...side-t956.html '81 SWB "Pap paw" (Driver) The 81 build thread http://louisianaclassictruckclub.fre...-swb-t960.html Member of www.louisianaclassictruckclub.com https://www.facebook.com/groups/296290610747732/

01-26-2011, 11:00 AM	#3
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Re: Power Steering Pump & Brackets for a 250 6 cylinder I bought them off ebay thinking they would work on my 292 but they won't. The guy I bought them said he wasn't sure what year truck. I've asked around and was told they are for an integrated head 250.

01-26-2011, 09:58 PM	#4
fishingjred73 Registered User Join Date: May 2007 Location: LOUISIANA Posts: 811	Re: Power Steering Pump & Brackets for a 250 6 cylinder Yeah I just picked up some brackets for my 81 250 with the integrated head off a 84, and noticed yours were a little different than mine. Thanks for the info. TTT for you. __________________ James '68 Stepside (ground up in progress) My 68 build thread http://louisianaclassictruckclub.fre...side-t956.html '81 SWB "Pap paw" (Driver) The 81 build thread http://louisianaclassictruckclub.fre...-swb-t960.html Member of www.louisianaclassictruckclub.com https://www.facebook.com/groups/296290610747732/

01-26-2011, 10:29 PM	#6
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Re: Power Steering Pump & Brackets for a 250 6 cylinder I want these gone so I'll take a big hit, how about $100 shipped?

02-03-2011, 01:19 PM	#7
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Re: Power Steering Pump & Brackets for a 250 6 cylinder ttt

02-14-2011, 12:13 AM	#8
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Re: Power Steering Pump & Brackets for a 250 6 cylinder ttt

02-23-2011, 04:01 PM	#9
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Re: Power Steering Pump & Brackets for a 250 6 cylinder Still available

03-19-2011, 04:46 PM	#10
ely71 Registered User Join Date: Mar 2011 Location: watsonville ca Posts: 2	Re: Power Steering Pump & Brackets for a 250 6 cylinder if you still have this bracket i would like to buy it

03-19-2011, 04:51 PM	#11
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Re: Power Steering Pump & Brackets for a 250 6 cylinder PM sent

09-09-2011, 04:25 PM	#12
ronaldharris Registered User Join Date: Sep 2011 Location: Rainsville, Alabama Posts: 2	Re: Power Steering Pump & Brackets for a 250 6 cylinder Is the bracket still available?

09-09-2011, 04:54 PM	#13
ronaldharris Registered User Join Date: Sep 2011 Location: Rainsville, Alabama Posts: 2	Re: Power Steering Pump & Brackets for a 250 6 cylinder Is the bracket still available?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.