Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
|
12-03-2021, 10:32 AM | #1 |
Registered User
Join Date: Nov 2021
Location: Cumming, Ga
Posts: 163
|
Wiring Harness Install...Extra items to consider
I just ordered the AAW complete wiring harness for my 71 GMC. I've read through multiple posts about the harness, tips, tricks, etc. and have begun assembling a list of things I'm going to need in addition to the kit. Here's what I have so far...
1. Good crimpers/stripper (Ordered the AAW crimper 10-18ga) 2. Solder for various connections/soldering iron 3. Heat Shrink in various sizes/heat gun 4. Wire loom in various sizes 5. Wire Ties 6. Electrical Tape 7. Masking Tape 8. Self tapping screws and cable clamps for routing wires 9. Rubber grommets in various sizes for passing through sheet metal 10. Multimeter 11. POSITIVE MENTAL ATTITUDE Any other "obvious" gotchas out there that may stop my progress for a trip to the hardware store? I'm not foolish enough to think I will eliminate all those trips, but I'd sure like to minimize them! |
12-03-2021, 06:42 PM | #2 | |
Registered User
Join Date: Dec 2017
Location: Elkhart, Texas
Posts: 1,597
|
Re: Wiring Harness Install...Extra items to consider
Quote:
|
|
12-04-2021, 04:01 PM | #3 |
Registered User
Join Date: Nov 2021
Location: Cumming, Ga
Posts: 163
|
Re: Wiring Harness Install...Extra items to consider
|
11-26-2022, 06:58 PM | #4 |
Registered User
Join Date: Aug 2003
Location: Boise, ID
Posts: 67
|
Re: Wiring Harness Install...Extra items to consider
How'd the harness install go?
__________________
'72 Blazer, A/C, tach, tilt. Not on the road at this time '87 v30 Custom Deluxe, standard cab, SRW, Utility bed '86 c10 Silverado longbed (for now) '19 ecsb, 2500, 4x4 '15 Subaru Legacy - commuter |
Bookmarks |
|
|