Drivers side kick panel vent door - The 1947 - Present Chevrolet & GMC Truck Message Board Network

indymachinist · 07-04-2022, 04:56 PM

Ok everyone, what am I missing here? I took my trucks vent doors apart and put in new seals. Normally I do a better job taking pictures of things before I take them apart but it seems I failed on that this time. This one seems to open too far not shut all the way. The passenger side works properly. This is definitely the door that came from the driver side, but from searching the board this door doesn’t seem to look like other driver side doors I have seen.

Did a previous owner replace the door with the wrong one? Am I doing something wrong with installation?

07-04-2022, 04:56 PM	#1
indymachinist Registered User Join Date: Jun 2015 Location: Indanapolis, IN Posts: 603	Drivers side kick panel vent door Ok everyone, what am I missing here? I took my trucks vent doors apart and put in new seals. Normally I do a better job taking pictures of things before I take them apart but it seems I failed on that this time. This one seems to open too far not shut all the way. The passenger side works properly. This is definitely the door that came from the driver side, but from searching the board this door doesn’t seem to look like other driver side doors I have seen. Did a previous owner replace the door with the wrong one? Am I doing something wrong with installation? Attached Images __________________ -Curt My 1968 Chevy shortbed stepside build Last edited by indymachinist; 07-04-2022 at 10:21 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.