![]() |
Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
![]() |
#1 |
Registered User
Join Date: Dec 2011
Location: Belgium
Posts: 82
|
Rear axle moving left/right
So after 11+years I finally finished the ’56…
Technical inspection is horror here in Belgium, so I now need to wait few months to get approval (or not) for the modifications I did ![]() The license plate I got was only valid for 20days, so I drove it as much as I could ![]() Now that the truck is back home, I see I have 3/4 on the left and 1-1/4 on the right, so almost centered again. My setup is : Chevy 56 stepside, 12-bolt truck rear end with (I think) original leaf springs but I flipped the axle and the shackle hanger like it is explained here Wheels are 18x9.5 - 6.75 backspace with 255/55R18 The space between the axle ends and the pads is the same on both sides. I thought a setup with leaf springs is rigid enough to hold the axle centered. Or do I need to install a panhard bar/sway bar ? Any advice is welcome ! ![]()
__________________
'56 Chevy stepside shortbed SBC350 - TH350 12-bolt rear |
![]() |
![]() |
Bookmarks |
|
|