70's frame out of square by 3/8"?

[El Dorado Jim]

Originally Posted by dozerbill72

That far out needs to be squared back up. As mentioned it will cause tire wear, poor handling and will not track straight down the road. If you have the body off they pull very easy. If it is only racked and doesn't have any bend in it you can use a come along and pull it back. I would pull it to square first than let it off and recheck. Some times you have to go a little past so that when it relaxes as you take pressure off it is where you want it. If it is bent you need to address that first than square. Good luck.

x2, easy to pull it back to square yourself with a come-a-long with the body off