What did you do today not on your truck... - Page 137 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**special-K** · 11-25-2022, 08:28 AM

You could keep a not so friendly dog there if you go every day. Uh... but then you'd be stuck with the not so friendly dog for a long time

**Steeveedee** · 11-25-2022, 10:34 AM

Just my luck, it would poop on the carpet right when the realtor showed up!

**special-K** · 11-25-2022, 10:54 AM

Yeah, not such a great idea. Probably snakes would be better. I've never even seen snake poop

**Sheepdip** · 11-26-2022, 12:04 AM

Well today I got some time to work on my Engine Run Stand that I started about a month ago, about another day of work and I'll be to the point of installing the control panel and related gauges, wiring, etc.

I have wanted one of these for years but never wanted to pay the price to buy one, have found a few used/homemade ones on Craigslist, but still did not want to pay the price, so I'm building one.

Thanks to myself and all my hoarding Hotrod/Car/Truck Buddy's I'm in it a whooping $25 so far as I had to buy the weld-on D-rings. So far I've made the jigs for BBC/SBC, SBF, a universal adjustable bell housing mount and a Jeep transmission mounting jig.
The plan is to be able to test just about any motor or motor/trans configuration, just have to initially fab the mounting jig, if it has not already been done.

Yep...that's a 302 SBF saddled up that's earmarked for my Jeep. Once I get it fired and tested, the stand comes apart for powder coating.

**Palf70Step** · 11-26-2022, 08:17 AM

I feel very tired just looking at all those shift levers.

**Getter-Done** · 11-26-2022, 09:13 AM

Nice Engine stand Sheepdip

**special-K** · 11-26-2022, 09:56 AM

Nice job. I guess your buddies know where to go if they want to run an engine now

Yeah yeah 302. That's cool. What I want to know is what's that 3 nostril beast behind it?

**Sheepdip** · 11-26-2022, 10:18 AM

Quote:

Originally Posted by Palf70Step

I feel very tired just looking at all those shift levers.

I've had Jeeps my whole adult life and I still get confused if too much time passes on using the twin-stick transfer case and have to look at the plate on the dash for In-Out, High-Low.

**Sheepdip** · 11-26-2022, 10:20 AM

Quote:

Originally Posted by Getter-Done

Nice Engine stand Sheepdip

Thank You....Hoping to have it done right after the new year if all goes as planned.

**Sheepdip** · 11-26-2022, 10:40 AM

Quote:

Originally Posted by special-K

Nice job. I guess your buddies know where to go if they want to run an engine now

Yeah yeah 302. That's cool. What I want to know is what's that 3 nostril beast behind it?

Thank You...and you are correct as we have a close-knit small group of guy's that seem to always be swapping and helping each other out, what one doesn't have, another does, and the same with knowledge and talent.

The 3 Nostrils belong to an early (36-37) Ford Flathead V8 that had been hot rodded years ago, it has been hanging on that engine stand for 25 plus years. Seems to fit the bill as a conversation piece more than making any noise.

**Johnl48** · 11-26-2022, 04:23 PM

Got a fender on today

dieseldawg142 · 11-26-2022, 05:19 PM

Quote:

Originally Posted by Palf70Step

I feel very tired just looking at all those shift levers.

yrs ago when we had Air Care (vehicle emissions testing) i went with my buddy to get his '46 flatfender tested.
it had a buick v6 in it with a 4 spd (lever #1) a overdrive unit (lever #2) and a twin stick t-case (levers #3 and #4)
the Air Care guy climbs in to dyno test it, looks at all the levers for a few minutes, then looks at me and says do you know how to operate this?
of course i do, but like anybody not being a fan of emission testing i told him i have no idea.
so he climbs out and another Air Care employee climbs in. he too spends about 5 minutes looking at all the levers, and he too asked me if i know how to work it....nope, nada, no idea.
so the 2 employees start talking and one of them grabs a book and after a few minutes they come back and announce the jeep has passed, we're like what? you haven't dyno'ed it or stuck the probe up the pipe. apparentley there was a note in their "book" that said they don't dyno anything with less than an 80" wheelbase....buddy still had to pay the testing fee, but got a free pass....he was not sure if the jeep would have passed, so we took the free win

72c20customcamper · 11-26-2022, 05:57 PM

Quote:

Originally Posted by Johnl48

Got a fender on today

Looks great nice gaps - but it don’t count . This is the “What did you do today NOT on your truck “ thread .

**Johnl48** · 11-26-2022, 06:03 PM

Quote:

Originally Posted by 72c20customcamper

Looks great nice gaps - but it don’t count . This is the “What did you do today NOT on your truck “ thread .

Technically it's not MY truck. It's my wife's

72c20customcamper · 11-26-2022, 06:40 PM

Touché.

**joedoh** · 11-26-2022, 09:21 PM

i watched two guys being pedantic on the internet.

**3757chevy** · 11-26-2022, 09:45 PM

Quote:

Originally Posted by joedoh

i watched two guys being pedantic on the internet.

**special-K** · 11-27-2022, 11:21 AM

Quote:

Originally Posted by joedoh

i watched two guys being pedantic on the internet.

I can laugh now that I looked that up

I've used other terms for that I shan't repeat here

**davischevy** · 11-27-2022, 02:27 PM

Quote:

Originally Posted by Johnl48

Technically it's not MY truck. It's my wife's

Excuse me for being pedantic, but you better put that lower trim on that door before you go much farther. Especially since it's hers.

The front stud is impossible to get to otherwise.

**FleetsidePaul** · 11-28-2022, 12:26 AM

I spent a lot of time today looking for my neighbors dog. He dug under the fence. Hard to believe because he's an old dog. Never did find him. Hopefully someone took him in. An old Chihuahua isn't going to fare well at night with the coyotes around here.

They put up the lost dog flyers and put him on Facebook. Hopefully somebody found him.

And I went to buy a really big rolling toolbox full of tools for cheap. But I was too late. It was already sold.

So I accomplished nothing today.

**3757chevy** · 11-28-2022, 12:50 AM

I drove 266 miles round trip to go to a birthday party for my 5 yr old grandson.

4u2nv · 11-28-2022, 07:25 AM

Quote:

Originally Posted by 3757chevy

I drove 266 miles round trip to go to birthday party for my 5 yr old grandson.

Now that's a good Grandpa right there

**GOPAPA** · 11-28-2022, 10:08 AM

Quote:

Originally Posted by 3757chevy

I drove 266 miles round trip to go to birthday party for my 5 yr old grandson.

Quote:

Originally Posted by 4u2nv

Now that's a good Grandpa right there

I agree , it is nice to hug our loves ones too.

Rich84 · 11-28-2022, 11:22 AM

Made the last of 4 trips to Ma. (330 miles round trip) to get my daughter's stuff. Hope to get a closing date this week so we can move it all again. Would be nice to get her in before Christmas. My garage and '84 are packed solid with her furniture & belongings. She has been home for 2 weeks and I now remember why she moved out.Lol. My wife and I are exhausted. Time for a break.

**FleetsidePaul** · 11-28-2022, 01:11 PM

Quote:

Originally Posted by Rich84

She has been home for 2 weeks and I now remember why she moved out.Lol. My wife and I are exhausted. Time for a break.

I know what you mean. I love when my kids and grandkids come visit, I love to see them and spend time with them but after a few days I'm kinda glad when they go home.

Ahh the sound of silence.

11-25-2022, 08:28 AM	#3401
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: What did you do today not on your truck... You could keep a not so friendly dog there if you go every day. Uh... but then you'd be stuck with the not so friendly dog for a long time __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

11-25-2022, 10:34 AM	#3402
Steeveedee Who Changed This? Join Date: Jan 2013 Location: Simi Valley, CA Posts: 10,160	Re: What did you do today not on your truck... Just my luck, it would poop on the carpet right when the realtor showed up! __________________ ~Steven '70 Chevy 3/4T Longhorn CST 402/400/3.56 Custom Camper Simi Valley, CA

11-25-2022, 10:54 AM	#3403
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: What did you do today not on your truck... Yeah, not such a great idea. Probably snakes would be better. I've never even seen snake poop __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

11-26-2022, 12:04 AM	#3404
Sheepdip Senior Member Join Date: Nov 2018 Location: Waterford California Posts: 2,403	Re: What did you do today not on your truck... Well today I got some time to work on my Engine Run Stand that I started about a month ago, about another day of work and I'll be to the point of installing the control panel and related gauges, wiring, etc. I have wanted one of these for years but never wanted to pay the price to buy one, have found a few used/homemade ones on Craigslist, but still did not want to pay the price, so I'm building one. Thanks to myself and all my hoarding Hotrod/Car/Truck Buddy's I'm in it a whooping $25 so far as I had to buy the weld-on D-rings. So far I've made the jigs for BBC/SBC, SBF, a universal adjustable bell housing mount and a Jeep transmission mounting jig. The plan is to be able to test just about any motor or motor/trans configuration, just have to initially fab the mounting jig, if it has not already been done. Yep...that's a 302 SBF saddled up that's earmarked for my Jeep. Once I get it fired and tested, the stand comes apart for powder coating. Attached Images

11-26-2022, 08:17 AM	#3405
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 46,725	Re: What did you do today not on your truck... I feel very tired just looking at all those shift levers. __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

11-26-2022, 09:13 AM	#3406
Getter-Done Senior Member Join Date: Dec 2009 Location: TN. Posts: 7,816	Re: What did you do today not on your truck... Nice Engine stand Sheepdip __________________ ________________________________________________________________________________________ ____________________________________________ 84 Chevy K-20 63 Impala (my high school car) http://67-72chevytrucks.com/vboard/s...Crew Cab Build

11-26-2022, 09:56 AM	#3407
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: What did you do today not on your truck... Nice job. I guess your buddies know where to go if they want to run an engine now Yeah yeah 302. That's cool. What I want to know is what's that 3 nostril beast behind it? __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

11-26-2022, 04:23 PM	#3411
Johnl48 Senior Member Join Date: Jun 2021 Location: West milford nj Posts: 323	Re: What did you do today not on your truck... Got a fender on today

11-26-2022, 06:40 PM	#3415
72c20customcamper Registered User Join Date: Jul 2018 Location: Catskill Mountains,NY Posts: 8,216	Re: What did you do today not on your truck... Touché. __________________ Mark 72 c20 custom camper Husky edition, 66 SS396 Chevelle 1964 Hawk, 63 Avanti,62 lark 1969 AMX , 1968 c20 stepside ,85 K20 1977 Suburban sold 68 anniversary.

11-26-2022, 09:21 PM	#3416
joedoh Senior Member Join Date: May 2007 Location: Doodah Kansas Posts: 7,751	Re: What did you do today not on your truck... i watched two guys being pedantic on the internet. __________________ the mass of men live lives of quiet desperation if there is a problem, I can have it. new project WAYNE http://67-72chevytrucks.com/vboard/s...d.php?t=844393

11-28-2022, 12:26 AM	#3420
FleetsidePaul R.I.P. E.S.L.L. Join Date: Aug 2005 Location: Kernville CA./ Lake Isabella CA. Posts: 11,419	Re: What did you do today not on your truck... I spent a lot of time today looking for my neighbors dog. He dug under the fence. Hard to believe because he's an old dog. Never did find him. Hopefully someone took him in. An old Chihuahua isn't going to fare well at night with the coyotes around here. They put up the lost dog flyers and put him on Facebook. Hopefully somebody found him. And I went to buy a really big rolling toolbox full of tools for cheap. But I was too late. It was already sold. So I accomplished nothing today. __________________ 1971 Custom C/20 1970 CST 20 1970 C/30 Flatbed 1983 C/30 Dually 2015 Corvette Z51 2021 Corvette Z51 1991 Cadillac Hearse 1982 Cadillac Eldorado Biarritz 2000 Porsche Boxster S 2020 Jeep Gladiator 1973 VW Thing 1973 Plymouth Satellite wagon 1963 Baja Bug 1959 Bug Dune Buggy 1970 Baja Bug 1987 Jaguar XJ 350. R.I.P. El Jay R.I.P Jessie. R.I.P Grumpy. Every day is a gift from God.

11-28-2022, 12:50 AM	#3421
3757chevy Senior Member Join Date: Mar 2016 Location: Near Canon City ,Colorado Posts: 3,878	Re: What did you do today not on your truck... I drove 266 miles round trip to go to a birthday party for my 5 yr old grandson. __________________ '35 1/2 ton Pickup (bought 2020) '68 C10 Suburban (bought 2021) '72 K5 Blazer (bought 2013) '67 Stepside (bought 1997-sold 2021) '96 Bronco Eddie Bauer (inherited 2010) My 1st day here-'67 C10(sold)and '72 K5 Blazer http://67-72chevytrucks.com/vboard/s...d.php?t=702056 "Another Blue Chevy"(1935) http://67-72chevytrucks.com/vboard/s...d.php?t=799203 '68 Burb...https://67-72chevytrucks.com/vboard/...d.php?t=822994 MIKE Last edited by 3757chevy; 12-12-2022 at 01:56 AM.

11-28-2022, 11:22 AM	#3424
Rich84 Registered User Join Date: Mar 2012 Location: Woodbury, Ct. Posts: 1,667	Re: What did you do today not on your truck... Made the last of 4 trips to Ma. (330 miles round trip) to get my daughter's stuff. Hope to get a closing date this week so we can move it all again. Would be nice to get her in before Christmas. My garage and '84 are packed solid with her furniture & belongings. She has been home for 2 weeks and I now remember why she moved out.Lol. My wife and I are exhausted. Time for a break.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.