OR 100's of misc parts from the last 6 trucks parted out - Page 27 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

JWSmith · 05-31-2014, 07:22 PM

Metal door Panels?

JWSmith · 05-31-2014, 10:40 PM

Also need tail light housing x 2

**tll74** · 06-01-2014, 12:38 PM

Quote:

Originally Posted by diver

hi tom,wtb auto.trans.mount for my 1967 k-20. going from 4 speed to auto and tilt colum for k20. THANKS BUTCH zip 30141

Butch are you wanting the rubber mounts that mount the cast iron adapter to the cross member?

Quote:

Originally Posted by CATCHALLBLUE

69 leaf spring 1 ton dually stake bed with power brakes

Probably could do everything except the rear section that connects just below the firewall on the RH side.

Quote:

Originally Posted by JWSmith

Metal door Panels?

Metal door panels, 25.00 each
tail light housings, 7.50 each

JWSmith · 06-01-2014, 01:20 PM

Quote:

Originally Posted by tll74

Butch are you wanting the rubber mounts that mount the cast iron adapter to the cross member?

Probably could do everything except the rear section that connects just below the firewall on the RH side.

Metal door panels, 25.00 each
tail light housings, 7.50 each

Pics of either?

69-72 · 06-01-2014, 01:22 PM

Happen to have a sway bar with brackets?

Zip code 58271

diver · 06-01-2014, 03:13 PM

hi,will the rubber mounts work on 4 speed trans. cross member?or will i have to put auto. cross member ? i do not know if 4 speed and auto.cross member are same.i wtb what it takes to put auto. in the 1967 k20.the auto.will be 350.THANK YOU SO MUCH FOR WORKING WITH ME.butch

Youey · 06-01-2014, 09:38 PM

Do you have the full gas pedal assembly brackets, and the rod that goes to the carb?

**tll74** · 06-03-2014, 12:54 AM

Quote:

Originally Posted by JWSmith

Pics of either?

Sure..I'll post some soon.

Quote:

Originally Posted by 69-72

Happen to have a sway bar with brackets?

Zip code 58271

2WD? if so yes. Complete with brackets 40.00 plus shipping. I'll get a cost.

Quote:

Originally Posted by diver

hi,will the rubber mounts work on 4 speed trans. cross member?or will i have to put auto. cross member ? i do not know if 4 speed and auto.cross member are same.i wtb what it takes to put auto. in the 1967 k20.the auto.will be 350.THANK YOU SO MUCH FOR WORKING WITH ME.butch

Butch, I think they are. I have a true 67 4x4 K20 4sp truck to compare to. I'll let you know.

Quote:

Originally Posted by Youey

Do you have the full gas pedal assembly brackets, and the rod that goes to the carb?

Yes on the pedal assy that mounts to the firewall. As for the rod are you 2wd or 4wd and what engine size?

Thanks, Tom

Youey · 06-03-2014, 12:05 PM

350 motor , 2wd was a manual now automatic still has clutch pedal in it.

69-72 · 06-05-2014, 01:48 PM

Quote:

Originally Posted by tll74

2WD? if so yes. Complete with brackets 40.00 plus shipping. I'll get a cost.

Thanks, Tom

Did you happen to get a shipping quote for the sway bar yet?

**pimpston65** · 06-05-2014, 04:36 PM

are the headlights still for sale? are the T3's. also any 3 or 4 section telescoping antenna's left

CATCHALLBLUE · 06-05-2014, 07:48 PM

Going to pass on the brake lines...found out they were not the problem.

Not sure i asked you this yet but do you have a power brake pushrod?

**tll74** · 06-06-2014, 01:44 AM

pics for JWSmith.

**tll74** · 06-06-2014, 02:01 AM

Quote:

Originally Posted by 69-72

Did you happen to get a shipping quote for the sway bar yet?

I will have in the morning.

Quote:

Originally Posted by Youey

350 motor , 2wd was a manual now automatic still has clutch pedal in it.

35.00 shipped.

Quote:

Originally Posted by pimpston65

are the headlights still for sale? are the T3's. also any 3 or 4 section telescoping antenna's left

I'll check

Quote:

Originally Posted by CATCHALLBLUE

Going to pass on the brake lines...found out they were not the problem.

Not sure i asked you this yet but do you have a power brake pushrod?

sorry nothing on the pushrod

Quote:

Originally Posted by diver

hi,will the rubber mounts work on 4 speed trans. cross member?or will i have to put auto. cross member ? i do not know if 4 speed and auto.cross member are same.i wtb what it takes to put auto. in the 1967 .the auto.will be 350.THANK YOU SO MUCH FOR WORKING WITH ME.butch

Butch, I looked at a 67 K20 with a 4sp and a 71 K20 with a TH350 and the crossmember and mounts look to be the same.

Thanks, Tom

diver · 06-06-2014, 07:24 AM

do you have auto.tilt for 67 k20.zip 30141. thanks again for your time.GOD bless all who reads this. butch

ZackD1212 · 06-06-2014, 09:43 AM

Right Passenger side dash(defrost) vent and the tubing for it?
Cigarette lighter assembly w/ bezel?
Door to cab rubber seals?

Shipping 62234

**tll74** · 06-06-2014, 06:20 PM

Quote:

Originally Posted by 69-72

Happen to have a sway bar with brackets?

Zip code 58271

Shipping is 29.76

**tll74** · 06-13-2014, 01:41 AM

pic for cst204x4

mx289 · 06-13-2014, 05:05 PM

Hi Tom.

Wondering if you happen to have a set of 4wd SB exhaust manifolds ?

Thank you sir.

Elliot949 · 06-14-2014, 07:55 AM

I need all of the upper A-Arm Washers that go between the A-Arms and Frame... Mostly the Concaved Washer that is right next to the frame... Thanks...

scrapmetal · 06-14-2014, 02:59 PM

Are the 67-68 armrests in pic 1 black? I'm looking for a pair.

BlackIce · 06-14-2014, 08:12 PM

I'm looking for the rear left side taillight harness, 1 e-brake hanger hook,(the hook that holds the e-brake cable thats clip on to the chassis) and 4 row radiator retainers uppers and lowers shipped to 30331..

fastlane · 06-14-2014, 09:10 PM

Hey, got any of the following parts?

* front outer bumper brackets for 69
* full set of deluxe side lights
* power steering hose, pressure and return (for a 73 box) and the clamp that holds them to the frame
* cigarette lighter trim and socket (I have a decent lighter)
* E-brake guide (It attaches to the frame and the cable slides through it)
* License plate lamp

Got any guage bezels without a choke?

firstgencamaros · 06-15-2014, 12:02 AM

67-68 2wd LH exhaust manifold original GM nice condition 65.00

Is this still available? It's on the first page. Pic 3. Doesn't say sold but it was a while ago. Please let me know. Shipped to 85233.

FGC

**tll74** · 06-16-2014, 12:52 AM

pics for Arrington01 and 67-4x4

Quote:

Originally Posted by mx289

Hi Tom.

Wondering if you happen to have a set of 4wd SB exhaust manifolds ?

Thank you sir.

Yes, I do. 160.00 a pair shipped. Acid dipped and media blasted. Very nice pair. Will you be using a heat riser?

Quote:

Originally Posted by Elliot949

I need all of the upper A-Arm Washers that go between the A-Arms and Frame... Mostly the Concaved Washer that is right next to the frame... Thanks...

12.50 shipped on the concave washers.

Quote:

Originally Posted by scrapmetal

Are the 67-68 armrests in pic 1 black? I'm looking for a pair.

No they are olive. 55.00 shipped on a nice pair of black ones.

Quote:

Originally Posted by BlackIce

I'm looking for the rear left side taillight harness, 1 e-brake hanger hook,(the hook that holds the e-brake cable thats clip on to the chassis) and 4 row radiator retainers uppers and lowers shipped to 30331..

Taillight harness is all one piece RH and LH. I have many that have been cut up from trailer plug addition. 15.00 for a LH half. 5.00 for e-brake retainer. 40.00 for the 4 core uppers, lowers, and cushions. 8.00 shipping

Quote:

Originally Posted by firstgencamaros

67-68 2wd LH exhaust manifold original GM nice condition 65.00
Not sure if I have that one still if not I have many others.
Is this still available? It's on the first page. Pic 3. Doesn't say sold but it was a while ago. Please let me know. Shipped to 85233.

FGC

Quote:

Originally Posted by fastlane

Hey, got any of the following parts?

* front outer bumper brackets for 69
* full set of deluxe side lights
* power steering hose, pressure and return (for a 73 box) and the clamp that holds them to the frame
* cigarette lighter trim and socket (I have a decent lighter)
* E-brake guide (It attaches to the frame and the cable slides through it)
* License plate lamp

Got any guage bezels without a choke?

05-31-2014, 07:22 PM	#651
JWSmith Registered User Join Date: May 2013 Location: Godfrey, IL Posts: 220	Re: 100's of misc parts from the last 6 trucks parted out Metal door Panels?

05-31-2014, 10:40 PM	#652
JWSmith Registered User Join Date: May 2013 Location: Godfrey, IL Posts: 220	Re: 100's of misc parts from the last 6 trucks parted out Also need tail light housing x 2

06-01-2014, 01:22 PM	#655
69-72 Registered User Join Date: May 2008 Location: 204 Posts: 903	Re: 100's of misc parts from the last 6 trucks parted out Happen to have a sway bar with brackets? Zip code 58271 __________________ 1969 Chevy Custom Camper 3/4 ton Rust free survivor 1972 Chevy Blazer CST 4x4 Almost Rust free survivor 1972 GMC Jimmy 2wd Undergoing surgery

06-01-2014, 03:13 PM	#656
diver Registered User Join Date: Nov 2013 Location: hiram,georgia Posts: 243	Re: 100's of misc parts from the last 6 trucks parted out hi,will the rubber mounts work on 4 speed trans. cross member?or will i have to put auto. cross member ? i do not know if 4 speed and auto.cross member are same.i wtb what it takes to put auto. in the 1967 k20.the auto.will be 350.THANK YOU SO MUCH FOR WORKING WITH ME.butch Last edited by diver; 06-02-2014 at 12:45 PM.

06-01-2014, 09:38 PM	#657
Youey Registered User Join Date: Oct 2013 Location: New Jersey Posts: 222	Re: 100's of misc parts from the last 6 trucks parted out Do you have the full gas pedal assembly brackets, and the rod that goes to the carb?

06-03-2014, 12:05 PM	#659
Youey Registered User Join Date: Oct 2013 Location: New Jersey Posts: 222	Re: 100's of misc parts from the last 6 trucks parted out 350 motor , 2wd was a manual now automatic still has clutch pedal in it.

06-05-2014, 04:36 PM	#661
pimpston65 Senior Member Join Date: Aug 2013 Location: corktown,mi. Posts: 5,194	Re: 100's of misc parts from the last 6 trucks parted out are the headlights still for sale? are the T3's. also any 3 or 4 section telescoping antenna's left

06-05-2014, 07:48 PM	#662
CATCHALLBLUE Registered User Join Date: May 2014 Location: Catchall Posts: 120	Re: 100's of misc parts from the last 6 trucks parted out Going to pass on the brake lines...found out they were not the problem. Not sure i asked you this yet but do you have a power brake pushrod?

06-06-2014, 01:44 AM	#663
tll74 "Junkyard Dog" Join Date: Jan 2008 Location: Springfield Oregon Posts: 2,527	Re: 100's of misc parts from the last 6 trucks parted out pics for JWSmith. Attached Images __________________ 72 C-10 Cheyenne Super LWB, Vortec 427,TH700, 3.73 posi, tach, tilt, AM-FM,Frame off in process. http://s289.photobucket.com/albums/l...t=7eae161e.pbw 88 Monte Carlo SS bought new only 10k miles. 73 Chevelle SS 454 had since high school. 74 Camaro Z28 350 AT numbers matching, Black on Black. 73 El Camino SS 350 4sp. 70 Chevelle SS 396 4sp, number matching with LS6 454 69 Chevy C30 Car Hauler 86 K20 383 4sp 4" lift frame off restoration. http://s289.photobucket.com/albums/l...t=1b1082d3.pbw

06-06-2014, 07:24 AM	#665
diver Registered User Join Date: Nov 2013 Location: hiram,georgia Posts: 243	Re: 100's of misc parts from the last 6 trucks parted out do you have auto.tilt for 67 k20.zip 30141. thanks again for your time.GOD bless all who reads this. butch

06-06-2014, 09:43 AM	#666
ZackD1212 Registered User Join Date: Feb 2014 Location: Collinsville, IL Posts: 92	Re: 100's of misc parts from the last 6 trucks parted out Right Passenger side dash(defrost) vent and the tubing for it? Cigarette lighter assembly w/ bezel? Door to cab rubber seals? Shipping 62234 __________________ Bagged 68 panel 5.3 4L60e 17 Tesla Model S 100D 03 Tahoe

06-13-2014, 01:41 AM	#668
tll74 "Junkyard Dog" Join Date: Jan 2008 Location: Springfield Oregon Posts: 2,527	Re: 100's of misc parts from the last 6 trucks parted out pic for cst204x4 Attached Images __________________ 72 C-10 Cheyenne Super LWB, Vortec 427,TH700, 3.73 posi, tach, tilt, AM-FM,Frame off in process. http://s289.photobucket.com/albums/l...t=7eae161e.pbw 88 Monte Carlo SS bought new only 10k miles. 73 Chevelle SS 454 had since high school. 74 Camaro Z28 350 AT numbers matching, Black on Black. 73 El Camino SS 350 4sp. 70 Chevelle SS 396 4sp, number matching with LS6 454 69 Chevy C30 Car Hauler 86 K20 383 4sp 4" lift frame off restoration. http://s289.photobucket.com/albums/l...t=1b1082d3.pbw

06-13-2014, 05:05 PM	#669
mx289 Registered User Join Date: May 2013 Location: wall,nj Posts: 865	Re: 100's of misc parts from the last 6 trucks parted out Hi Tom. Wondering if you happen to have a set of 4wd SB exhaust manifolds ? Thank you sir. __________________ Tom 71 K2500 71 K5 Jimmy

06-14-2014, 07:55 AM	#670
Elliot949 Registered User Join Date: Sep 2010 Location: Winfield, Ks. Posts: 4,162	Re: 100's of misc parts from the last 6 trucks parted out I need all of the upper A-Arm Washers that go between the A-Arms and Frame... Mostly the Concaved Washer that is right next to the frame... Thanks... __________________ Dan Johnston... Owner of My Dad's- '67 Chevy C-20 Custom Camper Short Fleetside Pickup PAPA J And our newest addition a- '71 Chevy CST/10 Short Fleetside Pickup Haulin' SOLD Papa J's Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=612847 Haulin's Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=671130SOLD B Bears Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=744210

06-14-2014, 02:59 PM	#671
scrapmetal Registered User Join Date: Mar 2009 Location: Menifee, Ca Posts: 26	Re: 100's of misc parts from the last 6 trucks parted out Are the 67-68 armrests in pic 1 black? I'm looking for a pair.



Register or Log In To remove these advertisements.

06-14-2014, 08:12 PM	#672
BlackIce Registered User Join Date: Jul 2011 Location: Atlanta, GA Posts: 44	Re: 100's of misc parts from the last 6 trucks parted out I'm looking for the rear left side taillight harness, 1 e-brake hanger hook,(the hook that holds the e-brake cable thats clip on to the chassis) and 4 row radiator retainers uppers and lowers shipped to 30331..

06-14-2014, 09:10 PM	#673
fastlane Registered User Join Date: Dec 2012 Location: Green Bay Wisconsin Posts: 126	Re: 100's of misc parts from the last 6 trucks parted out Hey, got any of the following parts? * front outer bumper brackets for 69 * full set of deluxe side lights * power steering hose, pressure and return (for a 73 box) and the clamp that holds them to the frame * cigarette lighter trim and socket (I have a decent lighter) * E-brake guide (It attaches to the frame and the cable slides through it) * License plate lamp Got any guage bezels without a choke? __________________ 1969 Chevy C/10 Stepside, Short Box. LQ4/4L80E swap in progress! (Donations being accepted!) Last edited by fastlane; 06-15-2014 at 08:48 AM.

06-15-2014, 12:02 AM	#674
firstgencamaros Registered User Join Date: Sep 2002 Location: Gilbert, AZ Posts: 151	Re: 100's of misc parts from the last 6 trucks parted out 67-68 2wd LH exhaust manifold original GM nice condition 65.00 Is this still available? It's on the first page. Pic 3. Doesn't say sold but it was a while ago. Please let me know. Shipped to 85233. FGC __________________ FGC

Register or Log In To remove these advertisements.