67 Shortwide Resto - Page 9 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

71Sleeper · 10-04-2011, 01:07 AM

Nice score on the steering column....I can never get that lucky. I know exactly what you mean about waiting on the motor build. I was told my was going to take a month and turned out to be 3 months. But hey, you are ready to move on to the next step now. keep us posted. Meaning more pics please.

JRBECK64 · 10-06-2011, 04:23 AM

I've Decided to step up and install Vintage Air on the truck but am a little confused on how to install the Alternator on the Drivers side of the truck because the Gen 2 heads don't have any holes in them to mount the aftermarket brakets to. Im guessing I am going to have to mount them to the Water pump somehow but not sure. Hope someone has some words of wisdom for me.

JRBECK64

JRBECK64 · 10-08-2011, 06:20 AM

Well it was Christmas come early around here this past week. I went and purchased all the goodies to put the Engine Compartment together. I bought an MSD Distributor with a 6AL Ignition Module, 600CFM Edlebrock Carb, MSD wires, Shorty Plugs, Headman Shortie Headers and a partrige in a pear tree!!!! Now all I have to do is get the Engine hooked to the tranny and drop it into the Frame. Pictures Coming Soon.

JRBECK64

JRBECK64 · 10-12-2011, 12:46 AM

Here are a few pictures of the engine installed in the frame. I am going to start putting the Engine together tomorrow so I will take a few more pictures tomorrow and post them as well.

JRBECK64

**67cheby** · 10-12-2011, 09:34 AM

looks good

JRBECK64 · 10-13-2011, 02:10 AM

Quote:

Originally Posted by 67cheby

looks good

Thanks,
I put my Ceramic Coated Hedders on today and they look great. I didnt take any pics but Tomorrow Im putting the top end of the engine together and I will post some more pics then.

JRBECK64

71Sleeper · 10-13-2011, 06:18 AM

Looking good...

JRBECK64 · 10-14-2011, 08:11 PM

Put the Intake, Valve covers and Carb on today. I am ordering my Vintage air on Monday and I think my Wife and I are going to drop the cab on the frame this weekend. Not sure about the cab yet because I have a little alignment issued with the exhaust and the Hedders. Thinkin Im going to have to tweek the Exhaust a little. I also hooked up the 700R4 Torque Converter to the flywheel. That was a bit of a task by myself. I had to loosen up all the bolts holding the Tranny on and slide the Tranny out a bit so I could Rotate the Torque Converter to line up the screw holes. I dont know if its just me but this is the 2nd 700R4 I have installed and it seems like I have had issues with the Torque Converter both times not wanting to seat all the way into the tranny causing it to bind on the Flexplate. Anyway here are a couple of pics of the Engine with some of the Bright Work on it.

JRBECK64

**67cheby** · 10-14-2011, 09:56 PM

looks great

VA72C10 · 10-14-2011, 10:47 PM

very nice!!!

JRBECK64 · 10-17-2011, 02:54 PM

Quote:

Originally Posted by VA72C10

very nice!!!

VA72C10 and 67Cheby,
Thanks for the Compliments. I orderd the Vintage Air this morning along with a Northern Aluminum Radiator and the B-Quiet sound deadening material for the inside of the cab. I need to order my wiring harness for the truck so I can get to work on that. Its like a neverending List of things to do!!!

JRBECK64

71Sleeper · 10-18-2011, 12:15 AM

Looks good!!! I know how it feels with the long list of things to do. Just got mine running and driving down the road and the list got even bigger. Hey that's what I signed up for a project.

JRBECK64 · 10-21-2011, 03:49 PM

I've been dealing with a really sick Dog, and if I dont post for a while that is because My Dog Judge is the priority right now. Im afraid its just a matter of time for the old guy. He's almost 15 years old and his Splien is leaking Red Blood Cells so he get tuckered out really easy. Any Prayers would be greatly appreciated for his return to health. Were hoping for the best but preparing for the worst.

Judge is the Red Dog.

JRBECK64 · 11-18-2011, 07:15 AM

Quote:

Originally Posted by JRBECK64

I've been dealing with a really sick Dog, and if I dont post for a while that is because My Dog Judge is the priority right now. Im afraid its just a matter of time for the old guy. He's almost 15 years old and his Splien is leaking Red Blood Cells so he get tuckered out really easy. Any Prayers would be greatly appreciated for his return to health. Were hoping for the best but preparing for the worst.

Judge is the Red Dog.

We put Judge to sleep on 11/4/2011, He was probably my best friend in the world and it was the hardest thing I have ever done to say goodbye to him. Its been a while since I posted and I think its time I get back to work on the pickup to help me get my mind on something else. I need to get my Vintage Air Installed and get the seats fabed into the truck. I got my Wiring Harness and I have about a million things to do.

JRBECK64

JRBECK64 · 12-13-2011, 12:33 AM

Been Working on the truck and got the cab installed along with most of the vintage air and all the accessories on the front of the engine. I am going to clean and undercoat the bottom of the bed and also install the new gas tank between the frame rails this week. I hope to have the bed on by this weekend. Here are a few pictures of the progress made so far. I forgot to mention that my Wife Soundproofed the inside of the cab also.

JRBECK64

67chevy1series · 12-13-2011, 01:53 AM

nice! keep it up!

VA72C10 · 12-13-2011, 02:04 AM

very nice!!!

71Sleeper · 12-13-2011, 02:52 AM

Sorry to hear about Judge. I have had a side kick now for about 2 years and she is like one of my children I couldn't even think of something happing to her now.

The truck is coming along nicely. Keep up the work!

JRBECK64 · 12-13-2011, 09:59 PM

Quote:

Originally Posted by 71Sleeper

Sorry to hear about Judge. I have had a side kick now for about 2 years and she is like one of my children I couldn't even think of something happing to her now.

The truck is coming along nicely. Keep up the work!

It was really hard loosing him but I know he's not hurting anymore so its time to let him go and get on with the Truck. Thanks for the compliments and I will try to get some more pics as I finish things.

JRBECK64

JRBECK64 · 12-13-2011, 10:02 PM

This is a shout out for my Wife. She has really been supportive of my Projects since my Son Left Home. She has been there to help with every aspect of the build and Im glad I have her as My Wife and My Partner.

JRBECK64

Zoomin · 12-13-2011, 10:48 PM

Its cool to have a best friend like that. I assume you participate in crocheting in return?

JRBECK64 · 12-14-2011, 01:41 PM

Quote:

Originally Posted by Zoomin

Its cool to have a best friend like that. I assume you participate in crocheting in return?

Lets not go that far!!!! LOL

JRBECK64

JRBECK64 · 12-29-2011, 10:45 AM

Well I have run into another road block on the Build. My Mom is in really bad shape so I went to Michigan to help as much as I can. She had 6 of her lower disc in her back fused and the surgery went without a problem. She stayed in the hospital for 7 days then my Dad put her in a rehabilitation center for 3 weeks of Physical Therapy. While in the Facility They Dropped her and broke her Tailbone into 6 peices, and also introduced an infection into the area the Hospital did the Surgery. My Sister caught them replacing her surgical bandage on the toilet (not the most sanatery places to be changing a Surgical Bandage). She is now in extreme pain from the tailbone being broke which has compounded the recovery time involved in healing from the surgery and the injuries she got from being dropped. What a huge mess. Any Prayers would be greatly appreciated for a speedy recovery.
JRBECK64

**67cheby** · 12-29-2011, 10:52 AM

hope everything gets better !

Zoomin · 12-29-2011, 10:58 AM

Prayers for your mom and family as you go through this ordeal.
Posted via Mobile Device

10-04-2011, 01:07 AM	#201
71Sleeper Registered User Join Date: Jul 2011 Location: Phenix City, AL Posts: 993	Re: 67 Shortwide Resto Nice score on the steering column....I can never get that lucky. I know exactly what you mean about waiting on the motor build. I was told my was going to take a month and turned out to be 3 months. But hey, you are ready to move on to the next step now. keep us posted. Meaning more pics please. __________________ 71 Ol' Blue: http://67-72chevytrucks.com/vboard/s...d.php?t=474752 Carving the Jake-olantern: http://67-72chevytrucks.com/vboard/s...d.php?t=679537

10-06-2011, 04:23 AM	#202
JRBECK64 Registered User Join Date: Sep 2008 Location: Cornelius Oregon Posts: 1,073	Re: 67 Shortwide Resto I've Decided to step up and install Vintage Air on the truck but am a little confused on how to install the Alternator on the Drivers side of the truck because the Gen 2 heads don't have any holes in them to mount the aftermarket brakets to. Im guessing I am going to have to mount them to the Water pump somehow but not sure. Hope someone has some words of wisdom for me. JRBECK64

10-08-2011, 06:20 AM	#203
JRBECK64 Registered User Join Date: Sep 2008 Location: Cornelius Oregon Posts: 1,073	Re: 67 Shortwide Resto Well it was Christmas come early around here this past week. I went and purchased all the goodies to put the Engine Compartment together. I bought an MSD Distributor with a 6AL Ignition Module, 600CFM Edlebrock Carb, MSD wires, Shorty Plugs, Headman Shortie Headers and a partrige in a pear tree!!!! Now all I have to do is get the Engine hooked to the tranny and drop it into the Frame. Pictures Coming Soon. JRBECK64

10-12-2011, 12:46 AM	#204
JRBECK64 Registered User Join Date: Sep 2008 Location: Cornelius Oregon Posts: 1,073	Re: 67 Shortwide Resto Here are a few pictures of the engine installed in the frame. I am going to start putting the Engine together tomorrow so I will take a few more pictures tomorrow and post them as well. JRBECK64

10-12-2011, 09:34 AM	#205
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 67 Shortwide Resto looks good __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

10-13-2011, 06:18 AM	#207
71Sleeper Registered User Join Date: Jul 2011 Location: Phenix City, AL Posts: 993	Re: 67 Shortwide Resto Looking good... __________________ 71 Ol' Blue: http://67-72chevytrucks.com/vboard/s...d.php?t=474752 Carving the Jake-olantern: http://67-72chevytrucks.com/vboard/s...d.php?t=679537

10-14-2011, 08:11 PM	#208
JRBECK64 Registered User Join Date: Sep 2008 Location: Cornelius Oregon Posts: 1,073	Re: 67 Shortwide Resto Put the Intake, Valve covers and Carb on today. I am ordering my Vintage air on Monday and I think my Wife and I are going to drop the cab on the frame this weekend. Not sure about the cab yet because I have a little alignment issued with the exhaust and the Hedders. Thinkin Im going to have to tweek the Exhaust a little. I also hooked up the 700R4 Torque Converter to the flywheel. That was a bit of a task by myself. I had to loosen up all the bolts holding the Tranny on and slide the Tranny out a bit so I could Rotate the Torque Converter to line up the screw holes. I dont know if its just me but this is the 2nd 700R4 I have installed and it seems like I have had issues with the Torque Converter both times not wanting to seat all the way into the tranny causing it to bind on the Flexplate. Anyway here are a couple of pics of the Engine with some of the Bright Work on it. JRBECK64

10-14-2011, 09:56 PM	#209
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 67 Shortwide Resto looks great __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

10-14-2011, 10:47 PM	#210
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: 67 Shortwide Resto very nice!!! __________________ Looking for a 67-72 swb or blazer project in or around VA.

10-18-2011, 12:15 AM	#212
71Sleeper Registered User Join Date: Jul 2011 Location: Phenix City, AL Posts: 993	Re: 67 Shortwide Resto Looks good!!! I know how it feels with the long list of things to do. Just got mine running and driving down the road and the list got even bigger. Hey that's what I signed up for a project. __________________ 71 Ol' Blue: http://67-72chevytrucks.com/vboard/s...d.php?t=474752 Carving the Jake-olantern: http://67-72chevytrucks.com/vboard/s...d.php?t=679537

10-21-2011, 03:49 PM	#213
JRBECK64 Registered User Join Date: Sep 2008 Location: Cornelius Oregon Posts: 1,073	Re: 67 Shortwide Resto I've been dealing with a really sick Dog, and if I dont post for a while that is because My Dog Judge is the priority right now. Im afraid its just a matter of time for the old guy. He's almost 15 years old and his Splien is leaking Red Blood Cells so he get tuckered out really easy. Any Prayers would be greatly appreciated for his return to health. Were hoping for the best but preparing for the worst. Judge is the Red Dog.

12-13-2011, 12:33 AM	#215
JRBECK64 Registered User Join Date: Sep 2008 Location: Cornelius Oregon Posts: 1,073	Re: 67 Shortwide Resto Been Working on the truck and got the cab installed along with most of the vintage air and all the accessories on the front of the engine. I am going to clean and undercoat the bottom of the bed and also install the new gas tank between the frame rails this week. I hope to have the bed on by this weekend. Here are a few pictures of the progress made so far. I forgot to mention that my Wife Soundproofed the inside of the cab also. JRBECK64

12-13-2011, 01:53 AM	#216
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: 67 Shortwide Resto nice! keep it up!

12-13-2011, 02:04 AM	#217
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: 67 Shortwide Resto very nice!!! __________________ Looking for a 67-72 swb or blazer project in or around VA.

12-13-2011, 02:52 AM	#218
71Sleeper Registered User Join Date: Jul 2011 Location: Phenix City, AL Posts: 993	Re: 67 Shortwide Resto Sorry to hear about Judge. I have had a side kick now for about 2 years and she is like one of my children I couldn't even think of something happing to her now. The truck is coming along nicely. Keep up the work! __________________ 71 Ol' Blue: http://67-72chevytrucks.com/vboard/s...d.php?t=474752 Carving the Jake-olantern: http://67-72chevytrucks.com/vboard/s...d.php?t=679537



Register or Log In To remove these advertisements.

12-13-2011, 10:02 PM	#220
JRBECK64 Registered User Join Date: Sep 2008 Location: Cornelius Oregon Posts: 1,073	Re: 67 Shortwide Resto This is a shout out for my Wife. She has really been supportive of my Projects since my Son Left Home. She has been there to help with every aspect of the build and Im glad I have her as My Wife and My Partner. JRBECK64

12-13-2011, 10:48 PM	#221
Zoomin Man of Mini-Talents Join Date: Sep 2009 Location: Oklahoma City, OK Posts: 4,295	Re: 67 Shortwide Resto Its cool to have a best friend like that. I assume you participate in crocheting in return? __________________ Steve Project - Ruth 66 Skylark Project - Lola 60 Biscayne Project - Iron Ox 54 GMC 100 Project - Darth 69 Camaro

12-29-2011, 10:45 AM	#223
JRBECK64 Registered User Join Date: Sep 2008 Location: Cornelius Oregon Posts: 1,073	Re: 67 Shortwide Resto Well I have run into another road block on the Build. My Mom is in really bad shape so I went to Michigan to help as much as I can. She had 6 of her lower disc in her back fused and the surgery went without a problem. She stayed in the hospital for 7 days then my Dad put her in a rehabilitation center for 3 weeks of Physical Therapy. While in the Facility They Dropped her and broke her Tailbone into 6 peices, and also introduced an infection into the area the Hospital did the Surgery. My Sister caught them replacing her surgical bandage on the toilet (not the most sanatery places to be changing a Surgical Bandage). She is now in extreme pain from the tailbone being broke which has compounded the recovery time involved in healing from the surgery and the injuries she got from being dropped. What a huge mess. Any Prayers would be greatly appreciated for a speedy recovery. JRBECK64

12-29-2011, 10:52 AM	#224
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 67 Shortwide Resto hope everything gets better ! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

12-29-2011, 10:58 AM	#225
Zoomin Man of Mini-Talents Join Date: Sep 2009 Location: Oklahoma City, OK Posts: 4,295	Re: 67 Shortwide Resto Prayers for your mom and family as you go through this ordeal. Posted via Mobile Device __________________ Steve Project - Ruth 66 Skylark Project - Lola 60 Biscayne Project - Iron Ox 54 GMC 100 Project - Darth 69 Camaro

Register or Log In To remove these advertisements.