Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
07-13-2020, 10:24 AM | #11 |
Registered User
Join Date: Sep 2018
Location: Ontario
Posts: 791
|
Re: 51 Chev on a S10 frame, named Dale
Now, the Rad.
I purchased the rad from Summit, but for some reason, the lower rad outlet was angled in, toward the middle of the rad, so I found a guy that welds aluminium and he put on a straight outlet. I sat the rad on 2 large round rubber supports, but needed to attach the top. So I made 3 brackets and attached them to the 3 pieces of split vacuum hose at the top of the rad. seems very secure. Also, anyone using a SBC, these rad hoses worked well. The upper is a perfect fit ,for a 55 Chev with a V8 - Gates 20416 and the lower is the upper rad hose for a 1999 - 2003 F250 with the 7.3 diesel - Gates 22433. There is a slight 'fold' in the lower, but I think it will be ok Also attached the 16 in SPAL fan and wired it up. .........getting closer everyday
__________________
https://67-72chevytrucks.com/vboard/...=797726&page=3http://https://67-72chevytrucks.com/...=797726&page=3 51 Chev 5 window on S10 with SBC 1958 Pontiac Wagon build https://67-72chevytrucks.com/vboard/...d.php?t=849781 |
Bookmarks |
|
|