The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1969 - 1972 Blazers and Jimmys Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 05-03-2021, 04:17 PM   #1
hubdawg
Registered User
 
Join Date: Aug 2017
Location: Colville
Posts: 65
Best alignment numbers

Anybody have a good set of alignment numbers to take to my local shop. I'm running 33x10.50 BFGs on my 72 , stock axles with a 2 1/2" lift kit and a new redhead box with all new front end components. Time to get this puppy on the road
hubdawg is offline   Reply With Quote
Old 05-04-2021, 10:11 AM   #2
hemi43
Registered User
 
hemi43's Avatar
 
Join Date: Mar 2015
Location: Ontario Canada
Posts: 1,496
Re: Best alignment numbers

Don't waste your time going to a shop, do it yourself.
All that can be adjusted is toe-in. With 33" tires, aim for 3/16" toe-in.
If you want your truck to handle better, put a set of 3 degree caster shims in. From factory the trucks have around 3 degrees built-in, so adding these shims will give you a total of 6 degrees which is perfect for these trucks.
The camber also can't be adjusted (technically).
One last thing, make sure you have an anti-sway bar.
hemi43 is offline   Reply With Quote
Old 05-09-2021, 12:27 PM   #3
Blazerowner
Senior Member
 
Blazerowner's Avatar
 
Join Date: Apr 2006
Location: Yuba City, Ca
Posts: 1,918
Re: Best alignment numbers

So do you put a camber adjustment ring behind the hub? I used the below for toe.

https://www.summitracing.com/parts/lro-diy-tst
__________________
Kirk
72 Blazer CST 4wd highlander
66 Nova
Blazerowner is offline   Reply With Quote
Old 05-11-2021, 01:38 PM   #4
hemi43
Registered User
 
hemi43's Avatar
 
Join Date: Mar 2015
Location: Ontario Canada
Posts: 1,496
Re: Best alignment numbers

Quote:
Originally Posted by Blazerowner View Post
So do you put a camber adjustment ring behind the hub? I used the below for toe.

https://www.summitracing.com/parts/lro-diy-tst
Leave the camber alone. As I mentioned above, it's the caster you want to increase. Here's a link to what you need----->
https://www.summitracing.com/parts/wrp-800061

To set the toe, all you need it a tape measure. You don't need all these fancy setup jigs like the link you gave, just go off the tire tread.
hemi43 is offline   Reply With Quote
Old 05-12-2021, 08:22 PM   #5
Blazerowner
Senior Member
 
Blazerowner's Avatar
 
Join Date: Apr 2006
Location: Yuba City, Ca
Posts: 1,918
Re: Best alignment numbers

Sorry I misread that. I might have to put those on mine.
__________________
Kirk
72 Blazer CST 4wd highlander
66 Nova
Blazerowner is offline   Reply With Quote
Old 05-13-2021, 11:00 AM   #6
Blazerowner
Senior Member
 
Blazerowner's Avatar
 
Join Date: Apr 2006
Location: Yuba City, Ca
Posts: 1,918
Re: Best alignment numbers

It doesn’t seem the shims come in 3 degrees. Is 4 too much or 2 the better route?
__________________
Kirk
72 Blazer CST 4wd highlander
66 Nova
Blazerowner is offline   Reply With Quote
Old 05-13-2021, 12:09 PM   #7
hemi43
Registered User
 
hemi43's Avatar
 
Join Date: Mar 2015
Location: Ontario Canada
Posts: 1,496
Re: Best alignment numbers

Quote:
Originally Posted by Blazerowner View Post
It doesn’t seem the shims come in 3 degrees. Is 4 too much or 2 the better route?
I machined my own and I just made them 3 degrees. If you're going to do a lot of driving in 4WD, I would get the 2 degree wedges. If you do mostly street driving, then go with the 4 degrees. The reason I would only use a 2 degree wedge in 4WD is to try and reduce too much front u-joint angle.
The info I'm giving you is what has worked for me with my setup, and it made a huge difference in feel and drivabilty. I don't get that side to side wander anymore that these Blazers are famous for.
I'm also running 33" tires with a 2" lift, so our setups are similar. When I put the wedges in I also added a factory front anti-sway bar, so I believe it was a combination of the two that made all the difference.

Last edited by hemi43; 05-13-2021 at 12:14 PM.
hemi43 is offline   Reply With Quote
Old 05-15-2021, 02:31 AM   #8
Blazerowner
Senior Member
 
Blazerowner's Avatar
 
Join Date: Apr 2006
Location: Yuba City, Ca
Posts: 1,918
Re: Best alignment numbers

Awesome thanks for the info.
__________________
Kirk
72 Blazer CST 4wd highlander
66 Nova
Blazerowner is offline   Reply With Quote
Old 05-15-2021, 10:27 AM   #9
hemi43
Registered User
 
hemi43's Avatar
 
Join Date: Mar 2015
Location: Ontario Canada
Posts: 1,496
Re: Best alignment numbers

Quote:
Originally Posted by Blazerowner View Post
Awesome thanks for the info.
Please let me know how you make out.
hemi43 is offline   Reply With Quote
Old 05-15-2021, 05:39 PM   #10
Blazerowner
Senior Member
 
Blazerowner's Avatar
 
Join Date: Apr 2006
Location: Yuba City, Ca
Posts: 1,918
Re: Best alignment numbers

Will do. I’m hoping to get it running the next couple of months. It’s been sitting two years.
__________________
Kirk
72 Blazer CST 4wd highlander
66 Nova
Blazerowner is offline   Reply With Quote
Old 05-22-2021, 01:30 AM   #11
Richard
Senior Member
 
Join Date: Dec 1999
Location: Southern California
Posts: 2,649
Re: Best alignment numbers

Tom Woods has the 3 degree shims, few other places as well. https://4xshaft.com/products/axle-shims
__________________
Richard
1972 K10 Custom Deluxe SWB Fleetside
My build https://67-72chevytrucks.com/vboard/...d.php?t=800746
Richard is offline   Reply With Quote
Old 05-22-2021, 07:27 PM   #12
truckster
Senior Member
 
truckster's Avatar
 
Join Date: Jan 2001
Location: Orem, Utah
Posts: 7,750
Re: Best alignment numbers

I probably need to do this to get rid of some wandering. I have 12.5 x 33 BFGs on mine. I'm assuming the thickest part of the wedge goes to the front, correct?
__________________
I have sworn upon the altar of God, eternal hostility against every form of tyranny over the mind of man. - Thomas Jefferson
truckster is offline   Reply With Quote
Old 05-23-2021, 04:46 AM   #13
Richard
Senior Member
 
Join Date: Dec 1999
Location: Southern California
Posts: 2,649
Re: Best alignment numbers

Quote:
Originally Posted by truckster View Post
I probably need to do this to get rid of some wandering. I have 12.5 x 33 BFGs on mine. I'm assuming the thickest part of the wedge goes to the front, correct?
No, thick part would go to the back to increase caster.
__________________
Richard
1972 K10 Custom Deluxe SWB Fleetside
My build https://67-72chevytrucks.com/vboard/...d.php?t=800746
Richard is offline   Reply With Quote
Old 05-23-2021, 11:40 AM   #14
truckster
Senior Member
 
truckster's Avatar
 
Join Date: Jan 2001
Location: Orem, Utah
Posts: 7,750
Re: Best alignment numbers

Quote:
Originally Posted by Richard View Post
No, thick part would go to the back to increase caster.
I'm glad I asked...
__________________
I have sworn upon the altar of God, eternal hostility against every form of tyranny over the mind of man. - Thomas Jefferson
truckster is offline   Reply With Quote
Old 05-23-2021, 09:23 PM   #15
HAULIN' IT
Registered User
 
Join Date: Dec 2015
Location: Beaver Falls, Pa
Posts: 165
Re: Best alignment numbers

Hemi, As much as you are not wrong, I feel there should be some time/effort spent figuring out where the caster is. Between the age of these trucks, swapped parts (especially a/m lift springs) ect. one could end up WAY off & just picking 3* may only be a start & if you are buying, why not get 5 or 6* shim if that puts you closer to the desired number? You sure dont want to be anywhere down around 0*.
A simple "C" shaped fixture made out of a couple pieces of scrap metal (to get around the bulge in the center of the knuckle) to sit on the knuckle at the ball joints & an angle finder will go along way to telling where you are. Lorne
HAULIN' IT is offline   Reply With Quote
Old 05-24-2021, 02:04 AM   #16
Richard
Senior Member
 
Join Date: Dec 1999
Location: Southern California
Posts: 2,649
Re: Best alignment numbers

Quote:
Originally Posted by truckster View Post
I'm glad I asked...
Glad it helped. Note that while increasing the caster to 6-8 degrees like the newer straight axle trucks can be beneficial. It does point the pinion down and increase driveshaft angle. Can cause interference in the CV at lifts 4" and over. A CV actually has less max operating angle than a single u-joint. Good idea to check for binding at full droop (axle hanging) after changes are made.
__________________
Richard
1972 K10 Custom Deluxe SWB Fleetside
My build https://67-72chevytrucks.com/vboard/...d.php?t=800746
Richard is offline   Reply With Quote
Old 05-27-2021, 10:28 AM   #17
hemi43
Registered User
 
hemi43's Avatar
 
Join Date: Mar 2015
Location: Ontario Canada
Posts: 1,496
Re: Best alignment numbers

Quote:
Originally Posted by HAULIN' IT View Post
Hemi, As much as you are not wrong, I feel there should be some time/effort spent figuring out where the caster is. Between the age of these trucks, swapped parts (especially a/m lift springs) ect. one could end up WAY off & just picking 3* may only be a start & if you are buying, why not get 5 or 6* shim if that puts you closer to the desired number? You sure dont want to be anywhere down around 0*.
A simple "C" shaped fixture made out of a couple pieces of scrap metal (to get around the bulge in the center of the knuckle) to sit on the knuckle at the ball joints & an angle finder will go along way to telling where you are. Lorne
I checked the factory numbers BEFORE I did any mods to get a baseline. My factory 1970 dana 44 had 3 degrees of caster and 1 degree of positive camber right from the factory. This was measured on brand new Tuff Country 2" lift springs.
I wanted a total of 6 degrees, and that's why I used 3 degree shims.
I checked the caster exactly like you mentioned, I measured from the top ball joint stud to the bottom stud with a small jig I made and a digital angle finder. I made sure the truck was sitting level before any measurements were taken. The camber was measured off of the rim lip. All measurements were taken with the full weight of the truck sitting on the ground.

Last edited by hemi43; 05-27-2021 at 10:36 AM.
hemi43 is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:43 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com