The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1969 - 1972 Blazers and Jimmys Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 02-01-2021, 10:15 AM   #1
K5Fan
Registered User
 
Join Date: Oct 2020
Location: Charleston SC
Posts: 65
A Couple of Things About My Top

I hope everyone is doing well today...
I recently bought a 1970 Blazer that I'm doing a partial resto, and I've had a couple of them in the past, but its been a while. I have a couple of questions that I think I know the answers to, but I would like to get some other ideas and input.

First, I'm pretty sure I have a two wall top, since on the past Blazer tops I've had, the bolts for the sides of the top went down into the body from the top of the sides, with the chrome pieces. The one I have, the bolts go in from under the bed up into the top, and you can't see the bolts when they are in. Also, the inner underside of the top has the lines going fore and aft, and there seems to be a hollow space between the underside of the top and the top side of the top. I know it sounds silly to ask, but that is what is called a two wall top, right?

The other thing that I am doing is making a bikini top that I want to attach to the front of the windshield and stretch it back, over the roll bar. I was looking to make the top out of Ottertex and wanted to know if anyone has used this material. What ever material I use, I wanted to have the front of the top wrap around the underside of the ledge on the front of the windshield frame, and didn't know what the best way was to secure the front of the bikini to the underside of the ledge. 100 years ago, the last time I made a bikini top for my 67 Blazer, I don't remember if it had the same ledge on the front of the windshield frame or not. Either way, what I did was I found a wrecked Blazer with a smashed top, but the front of the fiberglass top was still good. I cut the fiberglass top to where i was able to bolt it on to the windshield frame seal, and glassed in the canvas with biaxle and epoxy. Worked Great!! I wish I hadn't sold it with the truck, but... I was able to roll up the canvas with the fiberglass top front, and it fit in back between the roll bar and the bedside, but even when I had it strapped in the back it was still kind of clunky and would get in the way of stuff. Worst of all, it wore a couple of holes in my roll bar covers because of the shape of the fiberglass.

I would like to try to figure out a way to just secure the material across the front top of the windshield frame and wrap it around under the ledge that sticks out from the front of the windshield frame. I was thinking Velcro, since that would make a continuous connection unlike snaps or something . I have looked for some kind of frame or even a bikini top I could buy, but the closest thing I could find was from Bestop for a Scout, and it specifically says that it will not fit my Blazer. Any ideas or suggestions?

This is a great forum, and I'm glad to be a part of it. Thank Youuuuu!!!

Chris.
K5Fan is offline   Reply With Quote
Old 02-01-2021, 11:08 AM   #2
notsolo
Registered User
 
notsolo's Avatar
 
Join Date: Apr 2008
Location: Md
Posts: 2,446
Re: A Couple of Things About My Top

There was a member here who made a molded piece for the top of the windshield frame. Might use the search function, hope someone else has a link. Don't know if he still has them for sale.
notsolo is offline   Reply With Quote
Old 02-01-2021, 11:27 AM   #3
K5Fan
Registered User
 
Join Date: Oct 2020
Location: Charleston SC
Posts: 65
Re: A Couple of Things About My Top

Yeah, that's kind of what I made for the last one I had. Does anyone know who makes and/or sells them?

Chris.
K5Fan is offline   Reply With Quote
Old 02-01-2021, 12:36 PM   #4
Thealien
Senior Member
 
Thealien's Avatar
 
Join Date: Jun 2007
Location: Pine Ridge Florida
Posts: 4,126
Re: A Couple of Things About My Top

I bought one of those and I am not going to use it. I will try to take some pictures today or tomorrow and I will post them in this thread.

I have posted a couple pictures of it somewhere on this forum but for the life of me I can’t remember where?
Thealien is offline   Reply With Quote
Old 02-01-2021, 12:37 PM   #5
K5Fan
Registered User
 
Join Date: Oct 2020
Location: Charleston SC
Posts: 65
Re: A Couple of Things About My Top

Sounds good. Thank You!
K5Fan is offline   Reply With Quote
Old 02-01-2021, 12:49 PM   #6
Thealien
Senior Member
 
Thealien's Avatar
 
Join Date: Jun 2007
Location: Pine Ridge Florida
Posts: 4,126
Re: A Couple of Things About My Top

Here are the pictures in this post


http://67-72chevytrucks.com/vboard/s...6&postcount=19
Thealien is offline   Reply With Quote
Old 02-01-2021, 01:02 PM   #7
K5Fan
Registered User
 
Join Date: Oct 2020
Location: Charleston SC
Posts: 65
Re: A Couple of Things About My Top

That looks pretty cool. Like I said, I was going to maybe put Velcro along the underside of the front ledge, but that looks like it would be better. Can you get me in touch with the member or person you got it from?
K5Fan is offline   Reply With Quote
Old 02-01-2021, 01:48 PM   #8
A1971Blazer
Senior Member
 
A1971Blazer's Avatar
 
Join Date: Nov 2013
Location: East Tennessee
Posts: 2,097
Re: A Couple of Things About My Top

I made on for my '70 from aluminum sheet 1/8" thick
I cut and bent it to conform to the contour of the windshield frame and to use the existing mounting holes for the top.
I bought some sewable plastic "J" channel and had my buddy at his upholstery shop sew it to bikini top that I had bought from someone on face book.
It isn't exactly like I want it yet but I bought some more material to make another one this spring.
Here are a couple of pictures of the header I made from aluminum.
Name:  IMG_1021.jpg
Views: 1503
Size:  43.6 KB

the tabs on the back are bent down to catch the mounting holes in the windshield frame
Name:  IMG_1025.jpg
Views: 1499
Size:  41.7 KB

Name:  IMG_1028.jpg
Views: 1417
Size:  41.8 KB

top is loosely fitted here
Name:  IMG_0193.jpg
Views: 1414
Size:  39.8 KB
__________________
1967 C10 Step side
1968 C10 Step side
1970 Chevrolet K/5 Blazer
1972 Chevrolet K/5 Blazer
.............
A1971Blazer is offline   Reply With Quote
Old 02-01-2021, 02:06 PM   #9
Thealien
Senior Member
 
Thealien's Avatar
 
Join Date: Jun 2007
Location: Pine Ridge Florida
Posts: 4,126
Re: A Couple of Things About My Top

Quote:
Originally Posted by K5Fan View Post
That looks pretty cool. Like I said, I was going to maybe put Velcro along the underside of the front ledge, but that looks like it would be better. Can you get me in touch with the member or person you got it from?
He is in Canada and shipping was expensive. Took a while to get. If I could find an inexpensive shipping option I would sell you this one for less than I paid?

I'll see if I can find his contact info but I think I deleted it. Might have his email in my PayPal account?
Thealien is offline   Reply With Quote
Old 02-02-2021, 01:36 AM   #10
Blazerowner
Senior Member
 
Blazerowner's Avatar
 
Join Date: Apr 2006
Location: Yuba City, Ca
Posts: 1,918
Re: A Couple of Things About My Top

How did you get those bends like that?

Quote:
Originally Posted by A1971Blazer View Post
I made on for my '70 from aluminum sheet 1/8" thick
I cut and bent it to conform to the contour of the windshield frame and to use the existing mounting holes for the top.
I bought some sewable plastic "J" channel and had my buddy at his upholstery shop sew it to bikini top that I had bought from someone on face book.
It isn't exactly like I want it yet but I bought some more material to make another one this spring.
Here are a couple of pictures of the header I made from aluminum.
Attachment 2078620

the tabs on the back are bent down to catch the mounting holes in the windshield frame
Attachment 2078621

Attachment 2078622

top is loosely fitted here
Attachment 2078623
__________________
Kirk
72 Blazer CST 4wd highlander
66 Nova
Blazerowner is offline   Reply With Quote
Old 02-02-2021, 08:26 AM   #11
A1971Blazer
Senior Member
 
A1971Blazer's Avatar
 
Join Date: Nov 2013
Location: East Tennessee
Posts: 2,097
Re: A Couple of Things About My Top

Quote:
Originally Posted by Blazerowner View Post
How did you get those bends like that?
I machined a bending shoe to match the contour of the windshield frame
I had to make it so that it would bend one side at a time because my CNC mill only has 50" of travel in X direction.
I took a thick piece of aluminum and milled the contour on both sides in order to get the left and right side contour.
I clamp it down with a top plate and bend it with a soft hammer using the softer 1100 aluminum rather than 6061
I'm still working on the final shape, also will add a piece of weatherstrip underneath to seal it

this is the bending shoe...clamped it to the manual mill to hold it while bending.
Name:  IMG_1023.jpg
Views: 1261
Size:  56.0 KB

installed with tabs bent and bolted down...
I know....I need to repair the outer windshield frame where the weatherstrip attaches...
it's on the list
Name:  IMG_0098.jpg
Views: 1229
Size:  81.7 KB
__________________
1967 C10 Step side
1968 C10 Step side
1970 Chevrolet K/5 Blazer
1972 Chevrolet K/5 Blazer
.............

Last edited by A1971Blazer; 02-02-2021 at 01:19 PM.
A1971Blazer is offline   Reply With Quote
Old 02-02-2021, 05:21 PM   #12
best view
Registered User
 
Join Date: Apr 2009
Location: newbury new hampsire
Posts: 1,960
Re: A Couple of Things About My Top

That is all Greek to me nice work some skill there ,I took a hard top and cut the front 6 in off it same idea
best view is offline   Reply With Quote
Old 02-02-2021, 05:33 PM   #13
SeventyOne
Registered User
 
Join Date: Mar 2007
Location: Oakland, Ca
Posts: 1,358
Re: A Couple of Things About My Top

A1971Blazer - if you ever decide to make a small production run on the aluminum header I'd love to buy one.
SeventyOne is offline   Reply With Quote
Old 02-02-2021, 07:28 PM   #14
A1971Blazer
Senior Member
 
A1971Blazer's Avatar
 
Join Date: Nov 2013
Location: East Tennessee
Posts: 2,097
Re: A Couple of Things About My Top

Quote:
Originally Posted by SeventyOne View Post
A1971Blazer - if you ever decide to make a small production run on the aluminum header I'd love to buy one.
I’m trying to evaluate the options for producing these at a reasonable price...looking to get a full sheet of aluminum and have them waterjet cut. Machining them on the CNC mill is just too expensive. I’ll create a thread if and when I’m able to proceed with them. Thanks for the interest.
__________________
1967 C10 Step side
1968 C10 Step side
1970 Chevrolet K/5 Blazer
1972 Chevrolet K/5 Blazer
.............
A1971Blazer is offline   Reply With Quote
Old 04-09-2021, 11:17 AM   #15
Blazerowner
Senior Member
 
Blazerowner's Avatar
 
Join Date: Apr 2006
Location: Yuba City, Ca
Posts: 1,918
Re: A Couple of Things About My Top

I would be a buyer. It’s much cleaner than the one I made since I don’t have access to that type of equipment.


Quote:
Originally Posted by A1971Blazer View Post
I’m trying to evaluate the options for producing these at a reasonable price...looking to get a full sheet of aluminum and have
them waterjet cut. Machining them on the CNC mill is just too expensive. I’ll create a thread if and when I’m able to proceed with them. Thanks for the interest.
__________________
Kirk
72 Blazer CST 4wd highlander
66 Nova
Blazerowner is offline   Reply With Quote
Old 04-10-2021, 07:38 PM   #16
Moecarroll
Registered User
 
Moecarroll's Avatar
 
Join Date: Aug 2019
Location: Whittier
Posts: 1
Re: A Couple of Things About My Top

Looking good. I would be willing to buy one.

Morgan
Moecarroll is offline   Reply With Quote
Old 05-11-2021, 07:42 PM   #17
1972CST
Registered User
 
1972CST's Avatar
 
Join Date: Mar 2008
Location: Concord NC
Posts: 511
Re: A Couple of Things About My Top

That's a piece of art, definitely interested.
1972CST is offline   Reply With Quote
Old 05-19-2021, 03:13 PM   #18
72jimm
Registered User
 
Join Date: Aug 2020
Location: Tobiano BC
Posts: 2
Re: A Couple of Things About My Top

Interested as well!
72jimm is offline   Reply With Quote
Old 05-27-2021, 11:18 PM   #19
Chad Alder
Registered User
 
Join Date: Dec 2017
Location: Denver Colorado
Posts: 47
Re: A Couple of Things About My Top

I'd be a buyer assuming the cost is reasonable.

Thanks!

Chad
Chad Alder is offline   Reply With Quote
Old 05-28-2021, 06:28 PM   #20
CG
BlahBlahBlah
 
Join Date: Feb 2002
Location: Monroe, Wa.
Posts: 19,719
Re: A Couple of Things About My Top

I want one and I dont even own a Blazer =) I love stuff like this, someone sees a need and makes it happen. Nice job!
__________________
… … … … … … … … ... … … … … … … … … … … …

Monroe Swap meet May 18-19.
Mike has the same spots for the NW guys he's had forever.
Lunch time BBQ at the spaces.
If you have stuff to sell bring it along.

If you have a question PM stllookn (Mike) here via the board.


https://67-72chevytrucks.com/vboard/...d.php?t=851291
CG is offline   Reply With Quote
Old 06-02-2021, 08:35 AM   #21
best view
Registered User
 
Join Date: Apr 2009
Location: newbury new hampsire
Posts: 1,960
Re: A Couple of Things About My Top

That’s a needed part for a soft top
best view is offline   Reply With Quote
Old 06-08-2021, 08:44 PM   #22
RookDogg7
Registered User
 
Join Date: May 2017
Location: Ruston, LA
Posts: 4
Re: A Couple of Things About My Top

Would buy one today if they were available. Nice work!
RookDogg7 is offline   Reply With Quote
Old 02-09-2022, 11:29 PM   #23
HotRod4me
Registered User
 
Join Date: Feb 2020
Location: Beloit, WI
Posts: 36
Re: A Couple of Things About My Top

Have you gotten any closer to making these available?
Nice work!!!
HotRod4me is offline   Reply With Quote
Old 04-26-2023, 10:35 AM   #24
1972CST
Registered User
 
1972CST's Avatar
 
Join Date: Mar 2008
Location: Concord NC
Posts: 511
Re: A Couple of Things About My Top

I know this is an older thread, just wanted to bump it to see if there is any chance of this being available?
1972CST is offline   Reply With Quote
Old 04-26-2023, 10:42 AM   #25
A1971Blazer
Senior Member
 
A1971Blazer's Avatar
 
Join Date: Nov 2013
Location: East Tennessee
Posts: 2,097
Re: A Couple of Things About My Top

Quote:
Originally Posted by 1972CST View Post
I know this is an older thread, just wanted to bump it to see if there is any chance of this being available?
Sorry, I haven't had a great deal of time to devote to this idea.
With the interest in them, I hope to get back to it before long.
__________________
1967 C10 Step side
1968 C10 Step side
1970 Chevrolet K/5 Blazer
1972 Chevrolet K/5 Blazer
.............
A1971Blazer is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 05:14 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com