Grandpa’s 63 C10 build - The 1947 - Present Chevrolet & GMC Truck Message Board Network

J Williams · 12-22-2019, 10:06 PM

Here is a picture of the hydraulic clutch master cylinder mounted on the bracket from Cpt Fab.

J Williams · 12-22-2019, 10:09 PM

Over the next couple weeks I will be installing the NV3500 transmission I have out of a 90’s 1500 pickup. I also have the rear end out of the 78’ Chevy that I want to mount up. I ask that if you are reading this and you have ideas or tips or see something I did that won’t work or you have seen or know will fail, please by all means let me know. I always appreciate a little insight and wisdom.

12-22-2019, 10:06 PM	#1
J Williams Registered User Join Date: Jun 2014 Location: Paul idaho Posts: 263	Re: Grandpa’s 63 C10 build Here is a picture of the hydraulic clutch master cylinder mounted on the bracket from Cpt Fab. Attached Images __________________ 63 C10

12-22-2019, 10:09 PM	#2
J Williams Registered User Join Date: Jun 2014 Location: Paul idaho Posts: 263	Re: Grandpa’s 63 C10 build Over the next couple weeks I will be installing the NV3500 transmission I have out of a 90’s 1500 pickup. I also have the rear end out of the 78’ Chevy that I want to mount up. I ask that if you are reading this and you have ideas or tips or see something I did that won’t work or you have seen or know will fail, please by all means let me know. I always appreciate a little insight and wisdom. __________________ 63 C10



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.