Project 67 DRGNWGN - 67 Burban!! - Page 10 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Tyler212 · 09-08-2010, 01:14 AM

Man all I can say is you have some insane skills. Your ride's lookin great and I felt it was wrong to look at all this and not say something. Congrats man, Maybe once you get it runnin you can video it or something so we can hear it.

**kev2809** · 09-08-2010, 06:47 AM

lol, thanks for dropping in. i did get my valve covers, ps brackets and pulley, and alt. bracket powdercoated black over the weekend (thanks david!). they look really good on there, once i get them bolted on and sealed up ill post up some pics!
Posted via Mobile Device

Slick67 · 09-09-2010, 09:17 PM

Quote:

Originally Posted by kev2809

lol, thanks for dropping in. i did get my valve covers, ps brackets and pulley, and alt. bracket powdercoated black over the weekend (thanks david!). they look really good on there, once i get them bolted on and sealed up ill post up some pics!
Posted via Mobile Device

You are welcome!! Can't wait to see some big pics on the forum!!

**kev2809** · 09-09-2010, 10:00 PM

i picked up the valve cover bolts today, should have some pics by the weekend!

i picked up some 1" hex head bolts from ace hardware with locking washers. its super hard trying to tighten them up, there is no room for a socket, unless i scratched up all the powdercoat on the side. i had to tighten very slowly with a wrench...kinda sucks but better than the long wing studs. im not really into those...

**kev2809** · 09-18-2010, 08:00 PM

got the carb on with new gasket and air cleaner spacer to fit over the dizzy, valve covers on with new gaskets, oil pan back on with 1 piece reusable gasket

, new alternator on with chrome pulley and fan, and got my exhaust manifolds back today and got one side on. other side will not fit completely flush because of the dipstick tube. any ways around this?

VA72C10 · 09-18-2010, 09:54 PM

looking good. can you either bend or use a different style dipstick? THere are the Lokar style flexible ones...

onetoncrewcab · 09-18-2010, 10:11 PM

Kev,
This is the second time I've seen this and I am surprised no one else saw it. Is the metal rubbing on the bag? There was another shot from a little different angle a few pages back and it sure looks like it is. Isn't that bad?
Mike

**kev2809** · 09-18-2010, 10:57 PM

im gonna have to look into those flexible ones..good thinking!

in gonna have to check the bag again but im pretty sure its not touching. plus i still have to put the spacer plate on the driver side (for the panhard bar bracket), this shouldnt deflate it as much..
Posted via Mobile Device

onetoncrewcab · 09-18-2010, 11:09 PM

Quote:

Originally Posted by kev2809

in gonna have to check the bag again but im pretty sure its not touching. plus i still have to put the spacer plate on the driver side (for the panhard bar bracket), this shouldnt deflate it as much..
Posted via Mobile Device

Yeah, you might want to do that. This picture and the one a few pages back really looks like it is touching.

Post an update when you verify it.

Mike

Slick67 · 09-18-2010, 11:34 PM

Hey Kev. That was the bag that I was talking to you about. Scary lookin in the photo........it looks like it's rubbin. Don't Photoshop the pic......actually fix the problem.

**kev2809** · 10-16-2010, 07:08 PM

lol...its not touching! heres proof..and this is laid out.

you guys were scaring me about that so i had to double check..

anyways, had to get back out there and get working on the body again as my primer should be here next week. i ordered a full gallon (2 sprayable) of black epoxy primer and catalyst from eastwood i figured i would go ahead and take care the last of the rust, the driver rocker panel. again, im following Rokcrln's how to, makes it so much easier! today, i got just as far as removing the part of the rocker thats rusted, and also pulled out the entire seats and carpet to check the floor. it was killing me not knowing what was under there after fixing what i fixed already. and actually, its not bad at all, but i had to know whats behind it!
before..

**kev2809** · 10-16-2010, 07:11 PM

and cut out...the holes you see at the top is from me with the grinder and screwdriver trying to get the spot welds off (same mistake i made on the other side lol)

and after looking over the entire floor, this is pretty much all i have found in rust, other than a few scaling.

i believe i will fix this before i weld on the rocker. the only problem is i dont have a patch for it, but i do have a scrap hood i have been holding onto just for this reason. so i will have to make one. the only thing i need to figure out is what to do at the bottom that meets the floor. this area is where the 4th door would be, so its going to be tricky. good thing is carpet will be covering it, so im not too conerned on the final look but i would like it to look decent!

VA72C10 · 10-16-2010, 07:37 PM

looks pretty solid!

**kev2809** · 10-16-2010, 07:45 PM

ya i was surprised! after looking at the passenger rocker i figured there would be something serious under that ugly carpet. i will try and have the rusted part of the floor cut out so i can get something solid there..i would like to have the rocker and floor done by the beginning of next weekend so i can get back on the outside getting some body work done.

**kev2809** · 10-18-2010, 08:02 PM

cut out the rust today with the little time i had, and its gonna be really tricky to fix this. its a weird spot, the floor ties in here, so i cut out about 90% of it, removed a small brace that goes underneath the floor, and cut a little under the a pillar and bottom of the inside door. also found a couple very small pinhole rust spots in the floor towards the middle, but that should weld up just fine. i should have it all cut out by tomorrow or wednesday depending on my schedule, then i can start welding in the new pieces. heres a few pics, nothing exciting...

hotrodchevy1999 · 10-18-2010, 10:50 PM

starting to looking good

Slick67 · 11-01-2010, 06:29 PM

More progress! Keep going cause you have to drive it to the show next season!!! Takin mine this weekend so make plans to come and meet some other forum members!!!!

**kev2809** · 11-01-2010, 10:42 PM

lol, ima get it to somerville if i have drag the damn thing there!

i got the floor welded up and seam sealed..just need to snap a few pics. i should have the driver rocker welded up this week. had a strange thing happen today, kinda funny now but it sure wasnt when it happened.

i was trimming a little of the rocker panel, and as i was cutting on the bottom of it, for some reason the grinder got snagged and shot out of my hand. well, my face was the closest thing to it. it smacked me in the face, breaking my front tooth, busting my lip, and leaving a cut on my chin. talk about a close call, good thing for the guard on the grinder! this by far tops the stupidest accident ive done working on this thing, even more than catching my own pants on fire while welding up my floor last year!

anywho, should get some more progress this week, ill post pics when i do.

jmedero · 11-02-2010, 12:05 AM

DUDE..... YOU GOTTA BE CAREFULLLLLLLL!!!! That sounds like it hurt.

bdydrppedc10 · 11-11-2010, 03:26 PM

no offense we chat on c10 forum but to be honest with you i do not agree with the panhard stock arms you should just 4 link it and quit wasting your time i did the same thing i though it would be cheaper and easier to keep the trailing arms and panhard but all i did was have a headache every turn i took and secondly dont those bags look dry rotted get some new ones that isnt safe

**kev2809** · 11-11-2010, 09:17 PM

no offense taken! i do plan on 4 linking it in the future, along with a front z. i havent done it now because the rear will sit lower than the front, which i do not want. what problems did you have with panhard bar and stock arms? ive seen a lot of guys on here with that setup but never really asked about how it rides or handles.

the bags are actually brand new technically, never seen the road. i put them in about 10 months ago, never driven on. i air them up and down about every week or 2. they should be fine.

hotrodchevy1999 · 11-14-2010, 09:02 PM

hate to here about the grinder deal glad to hear it wasnt bad bad and u r ok hope to see some more build pics of your Burban

**kev2809** · 11-14-2010, 09:30 PM

lol, i look back and laugh now so its all good. def gonna be more safe though, never can be too careful!

actually took apart my front clip yesterday, and started removing some things from the firewall. i will sand it down this week (if its stops raining) and get it ready for primer. i think i have decided just to go ahead and basically strip the truck down, inside and out (including windows), primer inside and out, paint the engine bay and inside the doorjambs, fenders, and hood. then bolt everything up, line it up where it needs to be, straighten out the body, and hopefully get some paint on it!

im really focused on getting the jambs sprayed and the underside of the fenders and hood first. then i can take my time doing the body work and get it in primer and paint..but no real rush as long as i can get some primer on this thing. may even take a week off from work to really get some work done on it.

oldblue1968chevy · 11-29-2010, 09:30 PM

you WORK hard on this thing, makin us all look bad man, slow down! I hate to ask but any pics of the grinder carnage LOL

**kev2809** · 11-29-2010, 09:39 PM

lol...na, i actually didnt snap any pics of the ass kickin to my face lol

it was too embarassing..

i do have some progress though! i finished up seam sealing the welds on the floor, will take a pic once i sand down the entire floor but thats at a later date. over the weekend i did some major sanding! sanded down the entire driver side quater past the doors, all the way around to the tail light area, and even removed the glass to get inside the window channel. im about 98% done sanding, then its on to a few coats of epoxy then body work. even grinding down some of the welds i had welded on last year..

09-08-2010, 01:14 AM	#226
Tyler212 Registered User Join Date: Oct 2008 Location: Morehead, Ky Posts: 31	Re: Project 67 DRGNWGN - 67 Burban!! Man all I can say is you have some insane skills. Your ride's lookin great and I felt it was wrong to look at all this and not say something. Congrats man, Maybe once you get it runnin you can video it or something so we can hear it. __________________ 1968 Chevy C10 1998 Suburban My Truck

09-08-2010, 06:47 AM	#227
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,133	Re: Project 67 DRGNWGN - 67 Burban!! lol, thanks for dropping in. i did get my valve covers, ps brackets and pulley, and alt. bracket powdercoated black over the weekend (thanks david!). they look really good on there, once i get them bolted on and sealed up ill post up some pics! Posted via Mobile Device __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

09-09-2010, 10:00 PM	#229
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,133	Re: Project 67 DRGNWGN - 67 Burban!! i picked up the valve cover bolts today, should have some pics by the weekend! i picked up some 1" hex head bolts from ace hardware with locking washers. its super hard trying to tighten them up, there is no room for a socket, unless i scratched up all the powdercoat on the side. i had to tighten very slowly with a wrench...kinda sucks but better than the long wing studs. im not really into those... __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_] Last edited by kev2809; 09-09-2010 at 10:01 PM.

09-18-2010, 08:00 PM	#230
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,133	Re: Project 67 DRGNWGN - 67 Burban!! got the carb on with new gasket and air cleaner spacer to fit over the dizzy, valve covers on with new gaskets, oil pan back on with 1 piece reusable gasket , new alternator on with chrome pulley and fan, and got my exhaust manifolds back today and got one side on. other side will not fit completely flush because of the dipstick tube. any ways around this? __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

09-18-2010, 09:54 PM	#231
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Project 67 DRGNWGN - 67 Burban!! looking good. can you either bend or use a different style dipstick? THere are the Lokar style flexible ones... __________________ Looking for a 67-72 swb or blazer project in or around VA.

09-18-2010, 10:11 PM	#232
onetoncrewcab One of my kids. Cute eh? Join Date: Oct 2001 Location: Mitchell, SD Posts: 1,286	Re: Project 67 DRGNWGN - 67 Burban!! Kev, This is the second time I've seen this and I am surprised no one else saw it. Is the metal rubbing on the bag? There was another shot from a little different angle a few pages back and it sure looks like it is. Isn't that bad? Mike Attached Images __________________ If a kid asks where rain comes from, I think a cute thing to tell him is “God is crying.” And if he asks why God is crying, another cute thing to tell him is “Probably because of something you did. John 3:16 2006 Chevy HHR 2000 Dodge Durango 1985 Jeep CJ-7 1970 Chevy Pickup Last edited by onetoncrewcab; 09-18-2010 at 10:13 PM.

09-18-2010, 10:57 PM	#233
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,133	Re: Project 67 DRGNWGN - 67 Burban!! im gonna have to look into those flexible ones..good thinking! in gonna have to check the bag again but im pretty sure its not touching. plus i still have to put the spacer plate on the driver side (for the panhard bar bracket), this shouldnt deflate it as much.. Posted via Mobile Device __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

09-18-2010, 11:34 PM	#235
Slick67 Sofa King Crazy!! Join Date: Oct 2008 Location: Houston, TX Posts: 3,090	Re: Project 67 DRGNWGN - 67 Burban!! Hey Kev. That was the bag that I was talking to you about. Scary lookin in the photo........it looks like it's rubbin. Don't Photoshop the pic......actually fix the problem. __________________ You found the Tater. *My Blazer Build (New)* - http://67-72chevytrucks.com/vboard/s...d.php?t=654650 *My 67 Build* - http://67-72chevytrucks.com/vboard/s...d.php?t=335650 67 Chevy LWB big window a/c AKA TOTALLED BY A JACKASS. 1972 2wd Blazer "Porterbuilt and Sloshed"

10-16-2010, 07:08 PM	#236
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,133	Re: Project 67 DRGNWGN - 67 Burban!! lol...its not touching! heres proof..and this is laid out. you guys were scaring me about that so i had to double check.. anyways, had to get back out there and get working on the body again as my primer should be here next week. i ordered a full gallon (2 sprayable) of black epoxy primer and catalyst from eastwood i figured i would go ahead and take care the last of the rust, the driver rocker panel. again, im following Rokcrln's how to, makes it so much easier! today, i got just as far as removing the part of the rocker thats rusted, and also pulled out the entire seats and carpet to check the floor. it was killing me not knowing what was under there after fixing what i fixed already. and actually, its not bad at all, but i had to know whats behind it! before.. __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

10-16-2010, 07:11 PM	#237
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,133	Re: Project 67 DRGNWGN - 67 Burban!! and cut out...the holes you see at the top is from me with the grinder and screwdriver trying to get the spot welds off (same mistake i made on the other side lol) and after looking over the entire floor, this is pretty much all i have found in rust, other than a few scaling. i believe i will fix this before i weld on the rocker. the only problem is i dont have a patch for it, but i do have a scrap hood i have been holding onto just for this reason. so i will have to make one. the only thing i need to figure out is what to do at the bottom that meets the floor. this area is where the 4th door would be, so its going to be tricky. good thing is carpet will be covering it, so im not too conerned on the final look but i would like it to look decent! __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_] Last edited by kev2809; 10-18-2010 at 07:54 PM.

10-16-2010, 07:37 PM	#238
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Project 67 DRGNWGN - 67 Burban!! looks pretty solid! __________________ Looking for a 67-72 swb or blazer project in or around VA.

10-16-2010, 07:45 PM	#239
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,133	Re: Project 67 DRGNWGN - 67 Burban!! ya i was surprised! after looking at the passenger rocker i figured there would be something serious under that ugly carpet. i will try and have the rusted part of the floor cut out so i can get something solid there..i would like to have the rocker and floor done by the beginning of next weekend so i can get back on the outside getting some body work done. __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

10-18-2010, 08:02 PM	#240
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,133	Re: Project 67 DRGNWGN - 67 Burban!! cut out the rust today with the little time i had, and its gonna be really tricky to fix this. its a weird spot, the floor ties in here, so i cut out about 90% of it, removed a small brace that goes underneath the floor, and cut a little under the a pillar and bottom of the inside door. also found a couple very small pinhole rust spots in the floor towards the middle, but that should weld up just fine. i should have it all cut out by tomorrow or wednesday depending on my schedule, then i can start welding in the new pieces. heres a few pics, nothing exciting... __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

10-18-2010, 10:50 PM	#241
hotrodchevy1999 Hotrodchevy Join Date: Sep 2010 Location: Hot Springs NC Posts: 275	Re: Project 67 DRGNWGN - 67 Burban!! starting to looking good __________________ 2017 1500 CREW CAB GMC 1997 C1500 Chevy 1971 CHEVY CHEVELLE SS 402BB : 1971 CHEVY C10 Stepside Project 71 cluncker http://67-72chevytrucks.com/vboard/s...ferrerid=89816 My Build Second Chance Suburban (SCS)http://67-72chevytrucks.com/vboard/s...d.php?t=424650

11-01-2010, 06:29 PM	#242
Slick67 Sofa King Crazy!! Join Date: Oct 2008 Location: Houston, TX Posts: 3,090	Re: Project 67 DRGNWGN - 67 Burban!! More progress! Keep going cause you have to drive it to the show next season!!! Takin mine this weekend so make plans to come and meet some other forum members!!!! __________________ You found the Tater. *My Blazer Build (New)* - http://67-72chevytrucks.com/vboard/s...d.php?t=654650 *My 67 Build* - http://67-72chevytrucks.com/vboard/s...d.php?t=335650 67 Chevy LWB big window a/c AKA TOTALLED BY A JACKASS. 1972 2wd Blazer "Porterbuilt and Sloshed"



Register or Log In To remove these advertisements.

11-01-2010, 10:42 PM	#243
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,133	Re: Project 67 DRGNWGN - 67 Burban!! lol, ima get it to somerville if i have drag the damn thing there! i got the floor welded up and seam sealed..just need to snap a few pics. i should have the driver rocker welded up this week. had a strange thing happen today, kinda funny now but it sure wasnt when it happened. i was trimming a little of the rocker panel, and as i was cutting on the bottom of it, for some reason the grinder got snagged and shot out of my hand. well, my face was the closest thing to it. it smacked me in the face, breaking my front tooth, busting my lip, and leaving a cut on my chin. talk about a close call, good thing for the guard on the grinder! this by far tops the stupidest accident ive done working on this thing, even more than catching my own pants on fire while welding up my floor last year! anywho, should get some more progress this week, ill post pics when i do. __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

11-02-2010, 12:05 AM	#244
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,072	Re: Project 67 DRGNWGN - 67 Burban!! DUDE..... YOU GOTTA BE CAREFULLLLLLLL!!!! That sounds like it hurt. __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

11-11-2010, 03:26 PM	#245
bdydrppedc10 Registered User Join Date: Feb 2010 Location: Blairstown New Jersey Posts: 34	Re: Project 67 DRGNWGN - 67 Burban!! no offense we chat on c10 forum but to be honest with you i do not agree with the panhard stock arms you should just 4 link it and quit wasting your time i did the same thing i though it would be cheaper and easier to keep the trailing arms and panhard but all i did was have a headache every turn i took and secondly dont those bags look dry rotted get some new ones that isnt safe

11-11-2010, 09:17 PM	#246
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,133	Re: Project 67 DRGNWGN - 67 Burban!! no offense taken! i do plan on 4 linking it in the future, along with a front z. i havent done it now because the rear will sit lower than the front, which i do not want. what problems did you have with panhard bar and stock arms? ive seen a lot of guys on here with that setup but never really asked about how it rides or handles. the bags are actually brand new technically, never seen the road. i put them in about 10 months ago, never driven on. i air them up and down about every week or 2. they should be fine. __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

11-14-2010, 09:02 PM	#247
hotrodchevy1999 Hotrodchevy Join Date: Sep 2010 Location: Hot Springs NC Posts: 275	Re: Project 67 DRGNWGN - 67 Burban!! hate to here about the grinder deal glad to hear it wasnt bad bad and u r ok hope to see some more build pics of your Burban __________________ 2017 1500 CREW CAB GMC 1997 C1500 Chevy 1971 CHEVY CHEVELLE SS 402BB : 1971 CHEVY C10 Stepside Project 71 cluncker http://67-72chevytrucks.com/vboard/s...ferrerid=89816 My Build Second Chance Suburban (SCS)http://67-72chevytrucks.com/vboard/s...d.php?t=424650

11-14-2010, 09:30 PM	#248
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,133	Re: Project 67 DRGNWGN - 67 Burban!! lol, i look back and laugh now so its all good. def gonna be more safe though, never can be too careful! actually took apart my front clip yesterday, and started removing some things from the firewall. i will sand it down this week (if its stops raining) and get it ready for primer. i think i have decided just to go ahead and basically strip the truck down, inside and out (including windows), primer inside and out, paint the engine bay and inside the doorjambs, fenders, and hood. then bolt everything up, line it up where it needs to be, straighten out the body, and hopefully get some paint on it! im really focused on getting the jambs sprayed and the underside of the fenders and hood first. then i can take my time doing the body work and get it in primer and paint..but no real rush as long as i can get some primer on this thing. may even take a week off from work to really get some work done on it. __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

11-29-2010, 09:30 PM	#249
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: Project 67 DRGNWGN - 67 Burban!! you WORK hard on this thing, makin us all look bad man, slow down! I hate to ask but any pics of the grinder carnage LOL __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

11-29-2010, 09:39 PM	#250
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,133	Re: Project 67 DRGNWGN - 67 Burban!! lol...na, i actually didnt snap any pics of the ass kickin to my face lol it was too embarassing.. i do have some progress though! i finished up seam sealing the welds on the floor, will take a pic once i sand down the entire floor but thats at a later date. over the weekend i did some major sanding! sanded down the entire driver side quater past the doors, all the way around to the tail light area, and even removed the glass to get inside the window channel. im about 98% done sanding, then its on to a few coats of epoxy then body work. even grinding down some of the welds i had welded on last year.. __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_] Last edited by kev2809; 11-29-2010 at 09:45 PM.

Register or Log In To remove these advertisements.