what is your favorite tool brand? - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Southpa · 12-17-2002, 07:27 PM

I have a big mix of cheapo stuff, Mastercraft, Craftsman, got some Gray box wrenches and Asian stuff. If I saw a Snap-on truck sitting on the side of the road, unattended, w/ the engine running...I would be sorely tempted. j/k

cheatham · 12-17-2002, 10:11 PM

Amen to Made In USA. I used to have a fairly extensive Craftsman tool set, but they got nabbed (along with my former car) and since then I have had to resort to buying some 'nese junk. They make an excellent computer, BUT THEIR TOOLS ARE LIKE ONE USE CAMERAS. I have gone through two of rachets in the past month.

So to Sears I go to pick out a my Christmas present. BTW most of their current sales end on the 20th- I just wonder if they will drop the price even more or if they go back up on the 21st.

Jack

guitarman · 12-17-2002, 10:35 PM

Snapon, because someone owed me a bunch of money on a car he bought from me and I had to chase him down to get the money. I was going after the car I sold him on credit. He was a good friend for years and got strung out on drugs. So I went to get the car a nice Z-28 and he had totaled it. So reluctantly he gave me all of his tools, all Snapon. 10 drawer bottom, 3 drawer middle, top box, 2 side cabinets with 4 drawers each. Absolutely slap full of tools. I said I'd give them back if he'd pay me the balance $1100.00 and gave him an additional 6 months to come up with what he owed me with no interest. That was in 1986 and I never have seen or heard from him again.

Sub-versive · 12-17-2002, 11:19 PM

My fave is a tie between Snap-on and Proto. Unfortunately, my budget limits most purchases to Craftsman. I like most of their wrenches and sockets, but their drivers suck @ss. I also like and own S/K and of course Klein. My main requirement is that they are made in the U.S.

**Bowtie468** · 12-17-2002, 11:20 PM

Now thats one heck of a deal !!!!

Hooter · 12-18-2002, 02:06 AM

I'd have to say my favourite screwdrivers are the snap on set I have. If those screwdrivers can't remove the screws then its time for the drill

12-17-2002, 07:27 PM	#26
Southpa Registered User Join Date: May 2000 Location: Victoria, BC, Canada Posts: 2,410	I have a big mix of cheapo stuff, Mastercraft, Craftsman, got some Gray box wrenches and Asian stuff. If I saw a Snap-on truck sitting on the side of the road, unattended, w/ the engine running...I would be sorely tempted. j/k __________________ 1970 GMC 1500 Custom Original 350/TH350 Victoria, BC, Canada You can wish in one hand and crap in the other. See which one gets filled first.

12-17-2002, 10:35 PM	#28
guitarman Do it well or don't do it Join Date: Apr 2002 Location: Georgia Posts: 457	Snapon, because someone owed me a bunch of money on a car he bought from me and I had to chase him down to get the money. I was going after the car I sold him on credit. He was a good friend for years and got strung out on drugs. So I went to get the car a nice Z-28 and he had totaled it. So reluctantly he gave me all of his tools, all Snapon. 10 drawer bottom, 3 drawer middle, top box, 2 side cabinets with 4 drawers each. Absolutely slap full of tools. I said I'd give them back if he'd pay me the balance $1100.00 and gave him an additional 6 months to come up with what he owed me with no interest. That was in 1986 and I never have seen or heard from him again. __________________ Try to be the person your dog thinks you are. Excellent paint and body site: http://www.autobody101.com/ Visit my Web Site http://home.attbi.com/~agfosteriii

12-17-2002, 11:20 PM	#30
Bowtie468 Senior Member Join Date: Jun 2002 Location: Cecilia, Louisiana Posts: 1,638	Now thats one heck of a deal !!!! __________________ Chris click here to see my buildpage http://67-72chevytrucks.com/vboard/s...d.php?t=394656 ---------------------------------- 1979 C10 Silverado Big10 SWB Factory 454/400 Cardinal Red/Santa Fe Tan (original paint) 1968 C10 SWB Fleetside (Sold) 468BBC MultiPort TPI / Dynamic EFI P4 Black/Black 1963 Nova SS convertible (Sold) 194 I6/ PowerGlide

12-18-2002, 02:06 AM	#31
Hooter My other Love Join Date: Aug 2001 Location: Castlegar B.C. Canada Posts: 4,078	I'd have to say my favourite screwdrivers are the snap on set I have. If those screwdrivers can't remove the screws then its time for the drill __________________ MEMBER DISCS UP FRONT CLUB 69 custom camper/cst 10 70 monte carlo 383 stroker with a 700r4 77 fully loaded silverado (back in the backyard for a little while longer) 1980 BMW 320i (back in the garage finally) 1981 f@*d f150 4x4 (Robert red ford) tried to kill me 1972 Honda ct 90 trailbike Castlegar B.C.The great white North (Canada Eh!) Hooter_5@hotmail.com AC/DC RULES!!! First generation Monte Carlo club pictures of my life

12-17-2002, 10:11 PM	#27
cheatham I need a brake! Join Date: Jul 2002 Location: Nashville, TN Posts: 474	Amen to Made In USA. I used to have a fairly extensive Craftsman tool set, but they got nabbed (along with my former car) and since then I have had to resort to buying some 'nese junk. They make an excellent computer, BUT THEIR TOOLS ARE LIKE ONE USE CAMERAS. I have gone through two of rachets in the past month. So to Sears I go to pick out a my Christmas present. BTW most of their current sales end on the 20th- I just wonder if they will drop the price even more or if they go back up on the 21st. Jack

12-17-2002, 11:19 PM	#29
Sub-versive Boss Hogg Join Date: Apr 2002 Location: The Beaver State Posts: 2,361	My fave is a tie between Snap-on and Proto. Unfortunately, my budget limits most purchases to Craftsman. I like most of their wrenches and sockets, but their drivers suck @ss. I also like and own S/K and of course Klein. My main requirement is that they are made in the U.S.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.