Wheel fitment question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Claimchaser** · 12-24-2022, 04:34 PM

Hello all and Merry Christmas!

I have the chance to purchase a set of 15x8.5” 6x5.5 aluminum slots for my 65 GMC and the seller advised the center bore is just under 3.75”. From the photo and what I have seen that appear to fit our trucks but on paper 108mm/4.25” are required. Can someone verify this for me before I end up with another set of wheels I can’t use around the shop?

geezer#99 · 12-25-2022, 10:59 AM

No fit. Your numbers jive.
Look like Jeep rims.

You can find what you seek here.

https://akhwheels.com/

12-24-2022, 04:34 PM	#1
Claimchaser Junior Member Join Date: May 2022 Location: Huntsville,Alabama Posts: 29	Wheel fitment question Hello all and Merry Christmas! I have the chance to purchase a set of 15x8.5” 6x5.5 aluminum slots for my 65 GMC and the seller advised the center bore is just under 3.75”. From the photo and what I have seen that appear to fit our trucks but on paper 108mm/4.25” are required. Can someone verify this for me before I end up with another set of wheels I can’t use around the shop? Attached Images

12-25-2022, 10:59 AM	#2
geezer#99 Registered User Join Date: Aug 2009 Location: Bowser Posts: 13,515	Re: Wheel fitment question No fit. Your numbers jive. Look like Jeep rims. You can find what you seek here. https://akhwheels.com/



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.