SC Restored tach gauge rear tin. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

PT'S 70 CST · 04-05-2012, 09:31 PM

I have been trying to go that extra mile in restoring these gauges so I wanted to take it to the next level. Here are two tach gauge rear tins that I have restored with the tin being media blasted inside repainted and the back re stamped with the 8 CYL and the part #6468228 in the factory correct color and the font is spot on to the original. The outside was stamped and cleared to protect the bare metal. The only way I will sell these is if you send me a core in return. I would like $35.00 shipped with your core in return. These are the first two that I have done.

Thanks PT

PT'S 70 CST · 04-05-2012, 09:34 PM

Here is a pic of a NOS gauge to compare to.

PT

70LonghornCST · 04-05-2012, 09:36 PM

Wow! Nice Job

**Bethewaz** · 04-05-2012, 09:39 PM

That looks amazing. Nice work

4xshort · 04-05-2012, 10:05 PM

You definetly took it to the next level ! Will you share you secrets? What size media did you use? Is that sea foam green?

PT'S 70 CST · 04-05-2012, 10:17 PM

Yes it is sea foam green and the media is what ever they have in the cabinet at work. I think it is fine grit.

Thanks PT

**lolife99** · 04-05-2012, 10:28 PM

Quality work,... like always!

VA72C10 · 04-05-2012, 10:33 PM

Nice job PT!

jaros44sr · 04-05-2012, 10:59 PM

Ok, wish i had a core

PT'S 70 CST · 04-05-2012, 11:04 PM

Jaros just remove the one from your tach if you have one and send it to me and in return I will send this one out. By the way thanks for the nice comments guys.

PT

jaros44sr · 04-05-2012, 11:49 PM

Quote:

Originally Posted by PT'S 70 CST

Jaros just remove the one from your tach if you have one and send it to me and in return I will send this one out. By the way thanks for the nice comments guys.

PT

Mines an aftermarket tach, that i bought from Classic Ind.

Thanks for telling me about Les, just got my sw tin back from him. He stamped it out for my tach, sandblasted and painted it

PT'S 70 CST · 04-06-2012, 12:31 AM

No problem anytime.

PT

PT'S 70 CST · 04-06-2012, 11:14 AM

Bump

PT'S 70 CST · 04-06-2012, 05:08 PM

Ttt

jaros44sr · 04-07-2012, 08:13 AM

Ill be in touch, after i find one......might finally be done with my gauge panel, just have to send out my temp gauge to get it rescreened

Nice work! and ttt for ya

Livrat · 04-07-2012, 11:35 AM

Paul,
Have you ever had any issue with a ground stud just spinning while trying to take that nut off the tach tin?

PT'S 70 CST · 04-07-2012, 04:22 PM

Never had that problem. Take a little 2n1 oil and put it on the stud and base of the nut and let it sit then try to take two smaller nuts and put them on the stud to hold it then try and back off the nut. Those fat lock may be to big to put two back to back, if so I have some fine tread nuts here.

PT

jaros44sr · 04-07-2012, 05:45 PM

Thanks for the info. Guys

72BlckButy · 04-07-2012, 06:02 PM

That is amazing work PT... simply amazing.

PT'S 70 CST · 04-08-2012, 12:05 AM

Thanks Nate. Just a little twist to make a restoration more complete.

PT

**tll74** · 04-08-2012, 02:53 AM

NICE detail! Bump for ya.

PT'S 70 CST · 04-11-2012, 10:57 PM

Thanks guys.

PT

PT'S 70 CST · 04-16-2012, 09:30 PM

Ttt

PT'S 70 CST · 04-24-2012, 09:03 PM

Ttt

PT'S 70 CST · 05-02-2012, 08:59 AM

Ttt

04-05-2012, 09:31 PM	#1
PT'S 70 CST "GO DAWGS" Join Date: Oct 2003 Location: Batesburg, SC. 29006 Posts: 5,410	Restored tach gauge rear tin. I have been trying to go that extra mile in restoring these gauges so I wanted to take it to the next level. Here are two tach gauge rear tins that I have restored with the tin being media blasted inside repainted and the back re stamped with the 8 CYL and the part #6468228 in the factory correct color and the font is spot on to the original. The outside was stamped and cleared to protect the bare metal. The only way I will sell these is if you send me a core in return. I would like $35.00 shipped with your core in return. These are the first two that I have done. Thanks PT Attached Images __________________ 70 CST SWB 70 NOVA 93 Indy 500 Pace Truck (SOLD) 94 SILVERADO SWB 5/7 drop 2000 Silverado swb 2005 Nissan Altima 3.5 (Surprisingly very fast) 2004 GMC Yukon XL Denali BATESBURG, SC. 29006 29006 Some of my restorations http://www.snapfish.com/snapfish/thu...NAME=snapfish/ Restored Tach tins 8 cyl - 6 cyl http://67-72chevytrucks.com/vboard/s...d.php?t=518185 Contact info(Not my paypal address) DAWGSFAN227@YAHOO.COM God Bless Our Troops

04-05-2012, 09:34 PM	#2
PT'S 70 CST "GO DAWGS" Join Date: Oct 2003 Location: Batesburg, SC. 29006 Posts: 5,410	Re: Restored tach gauge rear tin. Here is a pic of a NOS gauge to compare to. PT Attached Images __________________ 70 CST SWB 70 NOVA 93 Indy 500 Pace Truck (SOLD) 94 SILVERADO SWB 5/7 drop 2000 Silverado swb 2005 Nissan Altima 3.5 (Surprisingly very fast) 2004 GMC Yukon XL Denali BATESBURG, SC. 29006 29006 Some of my restorations http://www.snapfish.com/snapfish/thu...NAME=snapfish/ Restored Tach tins 8 cyl - 6 cyl http://67-72chevytrucks.com/vboard/s...d.php?t=518185 Contact info(Not my paypal address) DAWGSFAN227@YAHOO.COM God Bless Our Troops

04-05-2012, 09:36 PM	#3
70LonghornCST Moderator Join Date: Jun 2008 Location: Modesto, CA Posts: 5,775	Re: Restored tach gauge rear tin. Wow! Nice Job __________________ 2018 Chevy Crew Cab 2006 Impala SS 1965 Plymouth Sport Fury 1970 Chevy Longhorn Bucket Seats Shoulder Belts Front Tow Hooks Factory Air Factory Speedwarning, Tach & Vaccum Factory Tilt CST Package AM/FM Radio Bumper Guards Richard 70 Longhorn CST Build Adding an AM/FM Decal

04-05-2012, 09:39 PM	#4
Bethewaz Registered User Join Date: Feb 2012 Location: Caledonia, NY Posts: 183	Re: Restored tach gauge rear tin. That looks amazing. Nice work

04-05-2012, 10:05 PM	#5
4xshort Registered User Join Date: Jan 2012 Location: Waseca Saskatchewan, Canada Posts: 276	Re: Restored tach gauge rear tin. You definetly took it to the next level ! Will you share you secrets? What size media did you use? Is that sea foam green? __________________ 1971 Chevy shortbox 4x4 made in Canada

04-05-2012, 10:17 PM	#6
PT'S 70 CST "GO DAWGS" Join Date: Oct 2003 Location: Batesburg, SC. 29006 Posts: 5,410	Re: Restored tach gauge rear tin. Yes it is sea foam green and the media is what ever they have in the cabinet at work. I think it is fine grit. Thanks PT __________________ 70 CST SWB 70 NOVA 93 Indy 500 Pace Truck (SOLD) 94 SILVERADO SWB 5/7 drop 2000 Silverado swb 2005 Nissan Altima 3.5 (Surprisingly very fast) 2004 GMC Yukon XL Denali BATESBURG, SC. 29006 29006 Some of my restorations http://www.snapfish.com/snapfish/thu...NAME=snapfish/ Restored Tach tins 8 cyl - 6 cyl http://67-72chevytrucks.com/vboard/s...d.php?t=518185 Contact info(Not my paypal address) DAWGSFAN227@YAHOO.COM God Bless Our Troops

04-05-2012, 10:28 PM	#7
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,681	Re: Restored tach gauge rear tin. Quality work,... like always! __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

04-05-2012, 10:33 PM	#8
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Restored tach gauge rear tin. Nice job PT! __________________ Looking for a 67-72 swb or blazer project in or around VA.

04-05-2012, 10:59 PM	#9
jaros44sr Registered User Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,421	Re: Restored tach gauge rear tin. Ok, wish i had a core __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

04-05-2012, 11:04 PM	#10
PT'S 70 CST "GO DAWGS" Join Date: Oct 2003 Location: Batesburg, SC. 29006 Posts: 5,410	Re: Restored tach gauge rear tin. Jaros just remove the one from your tach if you have one and send it to me and in return I will send this one out. By the way thanks for the nice comments guys. PT __________________ 70 CST SWB 70 NOVA 93 Indy 500 Pace Truck (SOLD) 94 SILVERADO SWB 5/7 drop 2000 Silverado swb 2005 Nissan Altima 3.5 (Surprisingly very fast) 2004 GMC Yukon XL Denali BATESBURG, SC. 29006 29006 Some of my restorations http://www.snapfish.com/snapfish/thu...NAME=snapfish/ Restored Tach tins 8 cyl - 6 cyl http://67-72chevytrucks.com/vboard/s...d.php?t=518185 Contact info(Not my paypal address) DAWGSFAN227@YAHOO.COM God Bless Our Troops

04-06-2012, 12:31 AM	#12
PT'S 70 CST "GO DAWGS" Join Date: Oct 2003 Location: Batesburg, SC. 29006 Posts: 5,410	Re: Restored tach gauge rear tin. No problem anytime. PT __________________ 70 CST SWB 70 NOVA 93 Indy 500 Pace Truck (SOLD) 94 SILVERADO SWB 5/7 drop 2000 Silverado swb 2005 Nissan Altima 3.5 (Surprisingly very fast) 2004 GMC Yukon XL Denali BATESBURG, SC. 29006 29006 Some of my restorations http://www.snapfish.com/snapfish/thu...NAME=snapfish/ Restored Tach tins 8 cyl - 6 cyl http://67-72chevytrucks.com/vboard/s...d.php?t=518185 Contact info(Not my paypal address) DAWGSFAN227@YAHOO.COM God Bless Our Troops

04-06-2012, 11:14 AM	#13
PT'S 70 CST "GO DAWGS" Join Date: Oct 2003 Location: Batesburg, SC. 29006 Posts: 5,410	Re: Restored tach gauge rear tin. Bump __________________ 70 CST SWB 70 NOVA 93 Indy 500 Pace Truck (SOLD) 94 SILVERADO SWB 5/7 drop 2000 Silverado swb 2005 Nissan Altima 3.5 (Surprisingly very fast) 2004 GMC Yukon XL Denali BATESBURG, SC. 29006 29006 Some of my restorations http://www.snapfish.com/snapfish/thu...NAME=snapfish/ Restored Tach tins 8 cyl - 6 cyl http://67-72chevytrucks.com/vboard/s...d.php?t=518185 Contact info(Not my paypal address) DAWGSFAN227@YAHOO.COM God Bless Our Troops

04-06-2012, 05:08 PM	#14
PT'S 70 CST "GO DAWGS" Join Date: Oct 2003 Location: Batesburg, SC. 29006 Posts: 5,410	Re: Restored tach gauge rear tin. Ttt __________________ 70 CST SWB 70 NOVA 93 Indy 500 Pace Truck (SOLD) 94 SILVERADO SWB 5/7 drop 2000 Silverado swb 2005 Nissan Altima 3.5 (Surprisingly very fast) 2004 GMC Yukon XL Denali BATESBURG, SC. 29006 29006 Some of my restorations http://www.snapfish.com/snapfish/thu...NAME=snapfish/ Restored Tach tins 8 cyl - 6 cyl http://67-72chevytrucks.com/vboard/s...d.php?t=518185 Contact info(Not my paypal address) DAWGSFAN227@YAHOO.COM God Bless Our Troops

04-07-2012, 08:13 AM	#15
jaros44sr Registered User Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,421	Re: Restored tach gauge rear tin. Ill be in touch, after i find one......might finally be done with my gauge panel, just have to send out my temp gauge to get it rescreened Nice work! and ttt for ya __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

04-07-2012, 11:35 AM	#16
Livrat Member #1049 Join Date: Jun 2000 Location: Troy Montana Posts: 3,940	Re: Restored tach gauge rear tin. Paul, Have you ever had any issue with a ground stud just spinning while trying to take that nut off the tach tin?



Register or Log In To remove these advertisements.

04-07-2012, 04:22 PM	#17
PT'S 70 CST "GO DAWGS" Join Date: Oct 2003 Location: Batesburg, SC. 29006 Posts: 5,410	Re: Restored tach gauge rear tin. Never had that problem. Take a little 2n1 oil and put it on the stud and base of the nut and let it sit then try to take two smaller nuts and put them on the stud to hold it then try and back off the nut. Those fat lock may be to big to put two back to back, if so I have some fine tread nuts here. PT __________________ 70 CST SWB 70 NOVA 93 Indy 500 Pace Truck (SOLD) 94 SILVERADO SWB 5/7 drop 2000 Silverado swb 2005 Nissan Altima 3.5 (Surprisingly very fast) 2004 GMC Yukon XL Denali BATESBURG, SC. 29006 29006 Some of my restorations http://www.snapfish.com/snapfish/thu...NAME=snapfish/ Restored Tach tins 8 cyl - 6 cyl http://67-72chevytrucks.com/vboard/s...d.php?t=518185 Contact info(Not my paypal address) DAWGSFAN227@YAHOO.COM God Bless Our Troops

04-07-2012, 05:45 PM	#18
jaros44sr Registered User Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,421	Re: Restored tach gauge rear tin. Thanks for the info. Guys __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

04-07-2012, 06:02 PM	#19
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: Restored tach gauge rear tin. That is amazing work PT... simply amazing. __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

04-08-2012, 12:05 AM	#20
PT'S 70 CST "GO DAWGS" Join Date: Oct 2003 Location: Batesburg, SC. 29006 Posts: 5,410	Re: Restored tach gauge rear tin. Thanks Nate. Just a little twist to make a restoration more complete. PT __________________ 70 CST SWB 70 NOVA 93 Indy 500 Pace Truck (SOLD) 94 SILVERADO SWB 5/7 drop 2000 Silverado swb 2005 Nissan Altima 3.5 (Surprisingly very fast) 2004 GMC Yukon XL Denali BATESBURG, SC. 29006 29006 Some of my restorations http://www.snapfish.com/snapfish/thu...NAME=snapfish/ Restored Tach tins 8 cyl - 6 cyl http://67-72chevytrucks.com/vboard/s...d.php?t=518185 Contact info(Not my paypal address) DAWGSFAN227@YAHOO.COM God Bless Our Troops

04-08-2012, 02:53 AM	#21
tll74 "Junkyard Dog" Join Date: Jan 2008 Location: Springfield Oregon Posts: 2,527	Re: Restored tach gauge rear tin. NICE detail! Bump for ya. __________________ 72 C-10 Cheyenne Super LWB, Vortec 427,TH700, 3.73 posi, tach, tilt, AM-FM,Frame off in process. http://s289.photobucket.com/albums/l...t=7eae161e.pbw 88 Monte Carlo SS bought new only 10k miles. 73 Chevelle SS 454 had since high school. 74 Camaro Z28 350 AT numbers matching, Black on Black. 73 El Camino SS 350 4sp. 70 Chevelle SS 396 4sp, number matching with LS6 454 69 Chevy C30 Car Hauler 86 K20 383 4sp 4" lift frame off restoration. http://s289.photobucket.com/albums/l...t=1b1082d3.pbw

04-11-2012, 10:57 PM	#22
PT'S 70 CST "GO DAWGS" Join Date: Oct 2003 Location: Batesburg, SC. 29006 Posts: 5,410	Re: Restored tach gauge rear tin. Thanks guys. PT __________________ 70 CST SWB 70 NOVA 93 Indy 500 Pace Truck (SOLD) 94 SILVERADO SWB 5/7 drop 2000 Silverado swb 2005 Nissan Altima 3.5 (Surprisingly very fast) 2004 GMC Yukon XL Denali BATESBURG, SC. 29006 29006 Some of my restorations http://www.snapfish.com/snapfish/thu...NAME=snapfish/ Restored Tach tins 8 cyl - 6 cyl http://67-72chevytrucks.com/vboard/s...d.php?t=518185 Contact info(Not my paypal address) DAWGSFAN227@YAHOO.COM God Bless Our Troops

04-16-2012, 09:30 PM	#23
PT'S 70 CST "GO DAWGS" Join Date: Oct 2003 Location: Batesburg, SC. 29006 Posts: 5,410	Re: Restored tach gauge rear tin. Ttt __________________ 70 CST SWB 70 NOVA 93 Indy 500 Pace Truck (SOLD) 94 SILVERADO SWB 5/7 drop 2000 Silverado swb 2005 Nissan Altima 3.5 (Surprisingly very fast) 2004 GMC Yukon XL Denali BATESBURG, SC. 29006 29006 Some of my restorations http://www.snapfish.com/snapfish/thu...NAME=snapfish/ Restored Tach tins 8 cyl - 6 cyl http://67-72chevytrucks.com/vboard/s...d.php?t=518185 Contact info(Not my paypal address) DAWGSFAN227@YAHOO.COM God Bless Our Troops

04-24-2012, 09:03 PM	#24
PT'S 70 CST "GO DAWGS" Join Date: Oct 2003 Location: Batesburg, SC. 29006 Posts: 5,410	Re: Restored tach gauge rear tin. Ttt __________________ 70 CST SWB 70 NOVA 93 Indy 500 Pace Truck (SOLD) 94 SILVERADO SWB 5/7 drop 2000 Silverado swb 2005 Nissan Altima 3.5 (Surprisingly very fast) 2004 GMC Yukon XL Denali BATESBURG, SC. 29006 29006 Some of my restorations http://www.snapfish.com/snapfish/thu...NAME=snapfish/ Restored Tach tins 8 cyl - 6 cyl http://67-72chevytrucks.com/vboard/s...d.php?t=518185 Contact info(Not my paypal address) DAWGSFAN227@YAHOO.COM God Bless Our Troops

05-02-2012, 08:59 AM	#25
PT'S 70 CST "GO DAWGS" Join Date: Oct 2003 Location: Batesburg, SC. 29006 Posts: 5,410	Re: Restored tach gauge rear tin. Ttt __________________ 70 CST SWB 70 NOVA 93 Indy 500 Pace Truck (SOLD) 94 SILVERADO SWB 5/7 drop 2000 Silverado swb 2005 Nissan Altima 3.5 (Surprisingly very fast) 2004 GMC Yukon XL Denali BATESBURG, SC. 29006 29006 Some of my restorations http://www.snapfish.com/snapfish/thu...NAME=snapfish/ Restored Tach tins 8 cyl - 6 cyl http://67-72chevytrucks.com/vboard/s...d.php?t=518185 Contact info(Not my paypal address) DAWGSFAN227@YAHOO.COM God Bless Our Troops

Register or Log In To remove these advertisements.