United Pacific bumper quality? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Chiefdan · 02-07-2021, 05:38 PM

I'm laid up for another month at least with a new bionic shoulder and have been ordering parts for my '67 shortbed that I can install in the spring. Speedway Motors has a United Pacific chrome front bumper on sale for $160 shipped. Anyone had experience with this brand good or bad?

**70STOVEBOLT** · 02-08-2021, 07:44 PM

I bought their bumper bolts and they seem to be good quality. I also installed their headlight half moon covers and they fit well and seem to be good quality as well.

**dmjlambert** · 02-12-2021, 07:19 PM

Well I couldn't stand just sitting here staring at this thread. It seems United Pacific is new in the sheet metal world so there aren't many reviews. So I just decided to get one and see for myself. I also ordered new United Pacific bolts through Speedway Motors. It arrived today.

72c20customcamper · 02-12-2021, 08:37 PM

Quote:

Originally Posted by dmjlambert

Well I couldn't stand just sitting here staring at this thread. It seems United Pacific is new in the sheet metal world so there aren't many reviews. So I just decided to get one and see for myself. I also ordered new United Pacific bolts through Speedway Motors. It arrived today.

Dont know if it's the angle but the it looks bent ? Did you like the quality?

**dmjlambert** · 02-12-2021, 08:47 PM

It looks and feels very nice.
It must be just the angle I took the photo, because the only bends I see are the ones that belong. I set one of the bolts in one of the holes for the picture.

72c20customcamper · 02-12-2021, 08:53 PM

Thanks for the clarification. I might order one myself for the 68

Chiefdan · 02-13-2021, 12:31 PM

Quote:

Originally Posted by dmjlambert

It looks and feels very nice.
It must be just the angle I took the photo, because the only bends I see are the ones that belong. I set one of the bolts in one of the holes for the picture.

Now THAT'S service! Just wanted some feedback before I order a bumper and someone orders one to check out it's quality for me. WOW! Guess my question was more than answered and now I will order one for installation in the spring. Thanks dmjlambert

**dmjlambert** · 02-13-2021, 03:06 PM

We need to wait a few years to see if it has a tendency to rust through the chrome, but by then the sale will be over...

**dmjlambert** · 03-14-2021, 01:24 PM

I like it so far. Much better than my old bent up 71-72 bumper with holes for non-existing turn signals.

02-07-2021, 05:38 PM	#1
Chiefdan Registered User Join Date: Nov 2020 Location: Fredonia Posts: 28	United Pacific bumper quality? I'm laid up for another month at least with a new bionic shoulder and have been ordering parts for my '67 shortbed that I can install in the spring. Speedway Motors has a United Pacific chrome front bumper on sale for $160 shipped. Anyone had experience with this brand good or bad?

02-08-2021, 07:44 PM	#2
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,210	Re: United Pacific bumper quality? I bought their bumper bolts and they seem to be good quality. I also installed their headlight half moon covers and they fit well and seem to be good quality as well. __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Coming soon: EFI 2015 Silverado 1500 LS 4.3/6L80/3.23

02-12-2021, 07:19 PM	#3
dmjlambert Senior Member Join Date: Apr 2016 Location: Cypress, TX Posts: 3,562	Re: United Pacific bumper quality? Well I couldn't stand just sitting here staring at this thread. It seems United Pacific is new in the sheet metal world so there aren't many reviews. So I just decided to get one and see for myself. I also ordered new United Pacific bolts through Speedway Motors. It arrived today. Attached Images

02-12-2021, 08:47 PM	#5
dmjlambert Senior Member Join Date: Apr 2016 Location: Cypress, TX Posts: 3,562	Re: United Pacific bumper quality? It looks and feels very nice. It must be just the angle I took the photo, because the only bends I see are the ones that belong. I set one of the bolts in one of the holes for the picture.

02-12-2021, 08:53 PM	#6
72c20customcamper Registered User Join Date: Jul 2018 Location: Catskill Mountains,NY Posts: 8,139	Re: United Pacific bumper quality? Thanks for the clarification. I might order one myself for the 68 __________________ Mark 72 c20 custom camper Husky edition, 66 SS396 Chevelle 1964 Hawk, 63 Avanti,62 lark 1969 AMX , 1968 c20 stepside ,85 K20 1977 Suburban sold 68 anniversary.

02-13-2021, 03:06 PM	#8
dmjlambert Senior Member Join Date: Apr 2016 Location: Cypress, TX Posts: 3,562	Re: United Pacific bumper quality? We need to wait a few years to see if it has a tendency to rust through the chrome, but by then the sale will be over...

03-14-2021, 01:24 PM	#9
dmjlambert Senior Member Join Date: Apr 2016 Location: Cypress, TX Posts: 3,562	Re: United Pacific bumper quality? I like it so far. Much better than my old bent up 71-72 bumper with holes for non-existing turn signals. Attached Images



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.