Project: Bolt one on - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Chevyman63 · 03-27-2008, 03:00 PM

Cool...progress!

jaros44sr · 03-27-2008, 03:10 PM

Looks like you went alittle heavy on the cutting of the pass. side floorboard

Grendel should be happy!

vtblazer · 03-27-2008, 03:20 PM

Quote:

Originally Posted by jaros44sr

Looks like you went alittle heavy on the cutting of the pass. side floorboard

Grendel should be happy!

Only because it was necessary, that wasn't the first cut ya know.

Trying to save the section towards the front corner that rolls into the tranny cover mount, it's pretty pitted but looks solid enough so far.
We'll see how it holds up to the blasting.

It's a common rust area, carpet and/or floor matts that held water.

jaros44sr · 03-27-2008, 03:30 PM

Quote:

Originally Posted by vtblazer

Only because it was necessary, that wasn't the first cut ya know.

Trying to save the section towards the front corner that rolls into the tranny cover mount, it's pretty pitted but looks solid enough so far.
We'll see how it holds up to the blasting.

It's a common rust area, carpet and/or floor matts that held water.

Only busting on ya!

Do you have the floor patch for that side

vtblazer · 03-27-2008, 03:42 PM

Quote:

Originally Posted by jaros44sr

Only busting on ya!

Do you have the floor patch for that side

Yes and it looks like we'll be using almost all of it too.

Going to replace the body mount but after that it's time to start closing thing's up.

jaros44sr · 03-27-2008, 03:53 PM

And yet another example of quality workmanship nears completion, good job! Saved one from the crusher...

Are you taking that last pc. out by the high hump or splicing it in?

*FormerMember* · 03-27-2008, 04:02 PM

Quote:

Originally Posted by jaros44sr

And yet another example of quality workmanship nears completion, good job! Saved one from the crusher...

Are you taking that last pc. out by the high hump or splicing it in?

Saved one from the crusher?

Not by a long shot. It's also far from completion. I still have stainless lines to run, a fuel tank to fabricate, doubler installation, cage fabrication, efi and vehicle harness to wire... all in all another 100 hours of work.

It was easy to write checks for this portion of the project but there's far more to go.

jaros44sr · 03-27-2008, 04:20 PM

I'll delete that part if it offends you

Big J · 03-27-2008, 04:27 PM

Nice work. Gotta love getting one side closed up only to have to cut a big friggin' hole in the other side.... Are you going with the truck outer floor on this side too? Its a handy dandy piece. You'll have it knocked out in no time.

*FormerMember* · 03-27-2008, 04:30 PM

Quote:

Originally Posted by jaros44sr

I'll delete that part if it offends you

Nah, just pointing out that I wish this were done already.

It's not even Kurt's fault this is taking as long as it does. My Brother in law, who I am building this for, takes forever to send funds. This project was supposed to be done by Christmas, 07. Now when I get this back, it's smack in the middle of the K30 conversion.

jaros44sr · 03-27-2008, 04:42 PM

Quote:

Originally Posted by grendel

Nah, just pointing out that I wish this were done already.

It's not even Kurt's fault this is taking as long as it does. My Brother in law, who I am building this for, takes forever to send funds. This project was supposed to be done by Christmas, 07. Now when I get this back, it's smack in the middle of the K30 conversion.

I know it well, funds, the hold up of all good restoration projects, good luck with the rest of the build, I'll be watching!...J.

*FormerMember* · 03-27-2008, 04:47 PM

Quote:

Originally Posted by jaros44sr

I know it well, funds, the hold up of all good restoration projects, good luck with the rest of the build, I'll be watching!...J.

Heh, this is no restoration... this rig will be sitting on 39" tires with a full cage and a 124:1 low range.

Heck, he even has the funds, it's the time that he doesn't have.

vtblazer · 03-29-2008, 02:49 PM

Passengers side inner rocker fit.

Started to work on installing the body mount thinking it'd be a good day, progress-wise only to find out it was the slip over type that was sent.

Looked into using it but the fit was crap so I choose to order another one.

Lots of other stuff to work on while it's being shipped.
Started stripping/mudding the quarter for primer.

When the weather permits, it's outside for blasting.

jaros44sr · 03-29-2008, 05:15 PM

Gotta agree on the slip ons, saw it on another truck and didn't like them. Seems like your just encapsulating the rust...Nice work and progress!!

Lots of pics on the kick panel, pls. When you get into it...

vtblazer · 04-04-2008, 02:30 PM

Pushed it outside to finish cleaning up the pass. side quarter and get it in primer.

Got the pass. side floor pan down to 'close' but still waiting for the floor support to show up.

jaros44sr · 04-04-2008, 05:18 PM

Nice bedside, no rust! what's up with that in a 1st gen.

*FormerMember* · 04-04-2008, 05:28 PM

Quote:

Originally Posted by jaros44sr

Nice bedside, no rust! what's up with that in a 1st gen.

I bought it in California and had it hauled here.

jb4short · 04-04-2008, 07:33 PM

nice

vtblazer · 04-05-2008, 09:19 PM

Primed and sealed.

Needs to be blocked out yet but it's progress.

Remeber that 'extra' gas fill hole?

Chevyman63 · 04-05-2008, 09:26 PM

Awesome Dude! Looks good!

More progress is a good thing.

*FormerMember* · 05-12-2008, 06:26 PM

Looking forward to seeing the progress from yesterday.

**FRENCHBLUE72** · 05-12-2008, 07:02 PM

Looking good whats the new completion date?

*FormerMember* · 05-12-2008, 07:03 PM

Quote:

Originally Posted by FRENCHBLUE72

Looking good whats the new completion date?

What's a completion date?

vtblazer · 05-15-2008, 01:56 PM

Quote:

Originally Posted by grendel

Looking forward to seeing the progress from yesterday.

weeks been crazy...between forgetting to bring the camera to the shop and forgetting to bring it home to down load the pics.

Got a lot checked off the list though.
*Cab support installed
*Inner rocker installed
*Outer rocker fit and ready to go

One piece left to do and it's already rough cut to size and shape so it should go quick.

vtblazer · 05-15-2008, 01:57 PM

More pics

03-27-2008, 03:00 PM	#101
Chevyman63 Can't wait to retire!! Join Date: Feb 2003 Location: Corunna, MI Posts: 1,575	Re: Project: Bolt one on Cool...progress! __________________ 2009 4x4 Chevy Crew Cab 6.0 1989 4x4 Siverado (270,000 miles) 1972 4x4 Blazer 2007 Chevy Cutaway 1 ton 1970 Corvette (sons project) RIP - CLR 10/11/09

03-27-2008, 03:10 PM	#102
jaros44sr Registered User Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,421	Re: Project: Bolt one on Looks like you went alittle heavy on the cutting of the pass. side floorboard Grendel should be happy! __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

03-27-2008, 03:53 PM	#106
jaros44sr Registered User Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,421	Re: Project: Bolt one on And yet another example of quality workmanship nears completion, good job! Saved one from the crusher... Are you taking that last pc. out by the high hump or splicing it in? __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

03-27-2008, 04:20 PM	#108
jaros44sr Registered User Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,421	Re: Project: Bolt one on I'll delete that part if it offends you __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

03-27-2008, 04:27 PM	#109
Big J Its lookin' like a Blazer! Join Date: Aug 2003 Location: Gods Country, KY Posts: 1,773	Re: Project: Bolt one on Nice work. Gotta love getting one side closed up only to have to cut a big friggin' hole in the other side.... Are you going with the truck outer floor on this side too? Its a handy dandy piece. You'll have it knocked out in no time. __________________ BAZINGA! My Build

03-29-2008, 02:49 PM	#113
vtblazer Registered User Join Date: Oct 2003 Location: Central Vermont Posts: 8,538	Re: Project: Bolt one on Passengers side inner rocker fit. Started to work on installing the body mount thinking it'd be a good day, progress-wise only to find out it was the slip over type that was sent. Looked into using it but the fit was crap so I choose to order another one. Lots of other stuff to work on while it's being shipped. Started stripping/mudding the quarter for primer. When the weather permits, it's outside for blasting. Attached Images

03-29-2008, 05:15 PM	#114
jaros44sr Registered User Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,421	Re: Project: Bolt one on Gotta agree on the slip ons, saw it on another truck and didn't like them. Seems like your just encapsulating the rust...Nice work and progress!! Lots of pics on the kick panel, pls. When you get into it... __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim Last edited by jaros44sr; 03-29-2008 at 05:17 PM.

04-04-2008, 02:30 PM	#115
vtblazer Registered User Join Date: Oct 2003 Location: Central Vermont Posts: 8,538	Re: Project: Bolt one on Pushed it outside to finish cleaning up the pass. side quarter and get it in primer. Got the pass. side floor pan down to 'close' but still waiting for the floor support to show up. Attached Images

04-04-2008, 05:18 PM	#116
jaros44sr Registered User Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,421	Re: Project: Bolt one on Nice bedside, no rust! what's up with that in a 1st gen. __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

04-04-2008, 07:33 PM	#118
jb4short Damn Yankee Join Date: Feb 2007 Location: Lynchburg, VA Posts: 2,261	Re: Project: Bolt one on nice

04-05-2008, 09:19 PM	#119
vtblazer Registered User Join Date: Oct 2003 Location: Central Vermont Posts: 8,538	Re: Project: Bolt one on Primed and sealed. Needs to be blocked out yet but it's progress. Remeber that 'extra' gas fill hole? Attached Images Last edited by vtblazer; 04-05-2008 at 09:21 PM.

04-05-2008, 09:26 PM	#120
Chevyman63 Can't wait to retire!! Join Date: Feb 2003 Location: Corunna, MI Posts: 1,575	Re: Project: Bolt one on Awesome Dude! Looks good! More progress is a good thing. __________________ 2009 4x4 Chevy Crew Cab 6.0 1989 4x4 Siverado (270,000 miles) 1972 4x4 Blazer 2007 Chevy Cutaway 1 ton 1970 Corvette (sons project) RIP - CLR 10/11/09

05-12-2008, 06:26 PM	#121
FormerMember Account Suspended Join Date: Feb 2004 Posts: 3,051	Re: Project: Bolt one on Looking forward to seeing the progress from yesterday.

05-12-2008, 07:02 PM	#122
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,589	Re: Project: Bolt one on Looking good whats the new completion date? __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

05-15-2008, 01:57 PM	#125
vtblazer Registered User Join Date: Oct 2003 Location: Central Vermont Posts: 8,538	Re: Project: Bolt one on More pics Attached Images Last edited by vtblazer; 05-15-2008 at 01:59 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.