|
03-12-2021, 12:24 AM | #1 |
Registered User
Join Date: Apr 2010
Location: Warrensburg, MO
Posts: 2,690
|
Re: Orson the 49 GMC ~ Chris C.
we FINALLY got the Wiring finished today! We’re hoping for initial startup tomorrow.
__________________
www.olesargecustoms.com email: chris@olesargecustoms.com '48 build: http://67-72chevytrucks.com/vboard/s...d.php?t=541904 '33 build: http://67-72chevytrucks.com/vboard/s...=1#post6232888 '49 build: http://67-72chevytrucks.com/vboard/s...=1#post6364475 Last edited by Rickysnickers; 03-12-2021 at 09:33 AM. Reason: flipped pics |
03-12-2021, 12:28 AM | #2 |
Registered User
Join Date: Apr 2010
Location: Warrensburg, MO
Posts: 2,690
|
Re: Orson the 49 GMC ~ Chris C.
Wyatt started cutting and patching the floors that Michael half-assed
__________________
www.olesargecustoms.com email: chris@olesargecustoms.com '48 build: http://67-72chevytrucks.com/vboard/s...d.php?t=541904 '33 build: http://67-72chevytrucks.com/vboard/s...=1#post6232888 '49 build: http://67-72chevytrucks.com/vboard/s...=1#post6364475 Last edited by Rickysnickers; 03-12-2021 at 09:34 AM. Reason: flipped pics |
03-12-2021, 10:45 PM | #3 |
Registered User
Join Date: Apr 2010
Location: Warrensburg, MO
Posts: 2,690
|
Re: Orson the 49 GMC ~ Chris C.
we spent all day trying to start the truck, but were plagued with problems. First a bad starter, then a bad fuel pump. Monday we diagnose it. Wyatt did get the floors done. Monday we will diagnose.
__________________
www.olesargecustoms.com email: chris@olesargecustoms.com '48 build: http://67-72chevytrucks.com/vboard/s...d.php?t=541904 '33 build: http://67-72chevytrucks.com/vboard/s...=1#post6232888 '49 build: http://67-72chevytrucks.com/vboard/s...=1#post6364475 Last edited by Rickysnickers; 03-13-2021 at 11:43 AM. Reason: flipped photo |
03-20-2021, 03:00 PM | #4 |
Registered User
Join Date: Jun 2009
Location: barrie ont
Posts: 99
|
Re: Orson the 49 GMC ~ Chris C.
Hi did you get it running
what tune file do you have in the computer my 5.3 had no spark after doing the harness. I found that I put a 2005 tune file and used wiring harness for 99-02 |
03-20-2021, 03:54 PM | #5 |
Registered User
Join Date: Apr 2010
Location: Warrensburg, MO
Posts: 2,690
|
Re: Orson the 49 GMC ~ Chris C.
nope. I had LT1swap cut the PCM, just had Brendan do a basic Performance tune.
__________________
www.olesargecustoms.com email: chris@olesargecustoms.com '48 build: http://67-72chevytrucks.com/vboard/s...d.php?t=541904 '33 build: http://67-72chevytrucks.com/vboard/s...=1#post6232888 '49 build: http://67-72chevytrucks.com/vboard/s...=1#post6364475 |
03-22-2021, 11:10 PM | #6 |
Registered User
Join Date: Apr 2010
Location: Warrensburg, MO
Posts: 2,690
|
Re: Orson the 49 GMC ~ Chris C.
so my code reader given a PO336 code which says the crank position sensor must be diagnosed. We tried switching it out. There are only 3 wires. The lt blue has 12v key on, the yellow/blk has continuity with ground key on, and the reference Wire has ~5v key on. The adapters from EV6 to Delphi injectors got here yesterday, so we decided to rip out the modified one and install a pre-made with the adapters.
__________________
www.olesargecustoms.com email: chris@olesargecustoms.com '48 build: http://67-72chevytrucks.com/vboard/s...d.php?t=541904 '33 build: http://67-72chevytrucks.com/vboard/s...=1#post6232888 '49 build: http://67-72chevytrucks.com/vboard/s...=1#post6364475 Last edited by Rickysnickers; 03-23-2021 at 09:38 AM. Reason: flipped pic |
03-23-2021, 01:35 PM | #7 |
Registered User
Join Date: Jan 2014
Location: edgeley sask
Posts: 89
|
Re: Orson the 49 GMC ~ Chris C.
You've never been stumped yet, I know you'll get this one figured too!
|
03-23-2021, 02:33 PM | #8 |
Registered User
Join Date: Nov 2014
Location: somewhere, PA
Posts: 1,036
|
Re: Orson the 49 GMC ~ Chris C.
block grounds connected well?
adjustable sensor mount? need it closer? turn the motor slowly and you should be able to see it go open on a multi meter when the teeth pass by |
03-23-2021, 03:56 PM | #9 |
Registered User
Join Date: Apr 2010
Location: Warrensburg, MO
Posts: 2,690
|
Re: Orson the 49 GMC ~ Chris C.
well I'm feeling pretty stumped and frustrated about now!
__________________
www.olesargecustoms.com email: chris@olesargecustoms.com '48 build: http://67-72chevytrucks.com/vboard/s...d.php?t=541904 '33 build: http://67-72chevytrucks.com/vboard/s...=1#post6232888 '49 build: http://67-72chevytrucks.com/vboard/s...=1#post6364475 |
03-23-2021, 04:11 PM | #10 |
Registered User
Join Date: Nov 2014
Location: somewhere, PA
Posts: 1,036
|
Re: Orson the 49 GMC ~ Chris C.
do the good signals continue during cranking?
|
03-23-2021, 09:51 PM | #11 |
Registered User
Join Date: Apr 2010
Location: Warrensburg, MO
Posts: 2,690
|
Re: Orson the 49 GMC ~ Chris C.
yes, but I have no spark. It makes no sense!
__________________
www.olesargecustoms.com email: chris@olesargecustoms.com '48 build: http://67-72chevytrucks.com/vboard/s...d.php?t=541904 '33 build: http://67-72chevytrucks.com/vboard/s...=1#post6232888 '49 build: http://67-72chevytrucks.com/vboard/s...=1#post6364475 |
03-23-2021, 10:17 PM | #12 |
Registered User
Join Date: Apr 2010
Location: Warrensburg, MO
Posts: 2,690
|
Re: Orson the 49 GMC ~ Chris C.
The new harness doesn’t seem to have any PRND wiring so we are in the middle of adding 5 circuits to the harness. Needles to say, but I won’t be buying from them again! Tomorrow we hope to get the cab on for the last time.
__________________
www.olesargecustoms.com email: chris@olesargecustoms.com '48 build: http://67-72chevytrucks.com/vboard/s...d.php?t=541904 '33 build: http://67-72chevytrucks.com/vboard/s...=1#post6232888 '49 build: http://67-72chevytrucks.com/vboard/s...=1#post6364475 Last edited by Rickysnickers; 03-24-2021 at 10:31 AM. Reason: flipped pic |
03-24-2021, 09:46 PM | #13 |
Registered User
Join Date: Apr 2010
Location: Warrensburg, MO
Posts: 2,690
|
Re: Orson the 49 GMC ~ Chris C.
We finished up the fuel system and bolted everything down. we also finished the PRND circuits and re-covered the harness. Put the harness through the firewall pass through, and mounted the cab.
__________________
www.olesargecustoms.com email: chris@olesargecustoms.com '48 build: http://67-72chevytrucks.com/vboard/s...d.php?t=541904 '33 build: http://67-72chevytrucks.com/vboard/s...=1#post6232888 '49 build: http://67-72chevytrucks.com/vboard/s...=1#post6364475 Last edited by Rickysnickers; 03-25-2021 at 10:24 AM. Reason: flipped pic |
03-25-2021, 07:48 AM | #14 |
Registered User
Join Date: Nov 2014
Location: somewhere, PA
Posts: 1,036
|
Re: Orson the 49 GMC ~ Chris C.
that always feels awesome, makes it a truck vs a pile of parts.
|
03-25-2021, 08:22 AM | #15 |
Registered User
Join Date: Apr 2010
Location: Warrensburg, MO
Posts: 2,690
|
Re: Orson the 49 GMC ~ Chris C.
you bet
__________________
www.olesargecustoms.com email: chris@olesargecustoms.com '48 build: http://67-72chevytrucks.com/vboard/s...d.php?t=541904 '33 build: http://67-72chevytrucks.com/vboard/s...=1#post6232888 '49 build: http://67-72chevytrucks.com/vboard/s...=1#post6364475 |
03-25-2021, 09:28 PM | #16 |
Registered User
Join Date: Apr 2010
Location: Warrensburg, MO
Posts: 2,690
|
Re: Orson the 49 GMC ~ Chris C.
Sure is! Here’s a link https://www.ebay.com/itm/SPECTRE-816...72.m2749.l2648
__________________
www.olesargecustoms.com email: chris@olesargecustoms.com '48 build: http://67-72chevytrucks.com/vboard/s...d.php?t=541904 '33 build: http://67-72chevytrucks.com/vboard/s...=1#post6232888 '49 build: http://67-72chevytrucks.com/vboard/s...=1#post6364475 |
03-26-2021, 09:00 AM | #17 |
Registered User
Join Date: Apr 2010
Location: Warrensburg, MO
Posts: 2,690
|
Re: Orson the 49 GMC ~ Chris C.
Thanks
__________________
www.olesargecustoms.com email: chris@olesargecustoms.com '48 build: http://67-72chevytrucks.com/vboard/s...d.php?t=541904 '33 build: http://67-72chevytrucks.com/vboard/s...=1#post6232888 '49 build: http://67-72chevytrucks.com/vboard/s...=1#post6364475 |
03-26-2021, 09:20 PM | #18 |
Registered User
Join Date: Apr 2010
Location: Warrensburg, MO
Posts: 2,690
|
Re: Orson the 49 GMC ~ Chris C.
Today JP ground down the welds on the roofpatch, a job that Alex never finished. Took pretty much all day, in fact we have to finish the back on Monday.
__________________
www.olesargecustoms.com email: chris@olesargecustoms.com '48 build: http://67-72chevytrucks.com/vboard/s...d.php?t=541904 '33 build: http://67-72chevytrucks.com/vboard/s...=1#post6232888 '49 build: http://67-72chevytrucks.com/vboard/s...=1#post6364475 Last edited by Rickysnickers; 03-27-2021 at 10:51 AM. Reason: flipped pics |
03-29-2021, 11:39 PM | #19 |
Registered User
Join Date: Apr 2010
Location: Warrensburg, MO
Posts: 2,690
|
Re: Orson the 49 GMC ~ Chris C.
1. We have a faceplate, but where are all the gauges?
2. Here is your new speedometer prior to Modification 3. The O2 sensors were a real PITA!
__________________
www.olesargecustoms.com email: chris@olesargecustoms.com '48 build: http://67-72chevytrucks.com/vboard/s...d.php?t=541904 '33 build: http://67-72chevytrucks.com/vboard/s...=1#post6232888 '49 build: http://67-72chevytrucks.com/vboard/s...=1#post6364475 |
03-29-2021, 11:43 PM | #20 |
Registered User
Join Date: Apr 2010
Location: Warrensburg, MO
Posts: 2,690
|
Re: Orson the 49 GMC ~ Chris C.
Then we put your Front clip back together.
Finally we welded pedestals to the floor for the seat to Mount to, and then we ran out of gas!
__________________
www.olesargecustoms.com email: chris@olesargecustoms.com '48 build: http://67-72chevytrucks.com/vboard/s...d.php?t=541904 '33 build: http://67-72chevytrucks.com/vboard/s...=1#post6232888 '49 build: http://67-72chevytrucks.com/vboard/s...=1#post6364475 |
03-30-2021, 07:53 AM | #21 | |
Registered User
Join Date: Nov 2014
Location: somewhere, PA
Posts: 1,036
|
Re: Orson the 49 GMC ~ Chris C.
Quote:
super interested to see what you do with the old gauge face. also ... i spy a wagon! |
|
03-30-2021, 01:06 PM | #22 |
Registered User
Join Date: Nov 2014
Location: somewhere, PA
Posts: 1,036
|
Re: Orson the 49 GMC ~ Chris C.
super cool sir!
|
03-30-2021, 10:44 PM | #23 |
Registered User
Join Date: Apr 2010
Location: Warrensburg, MO
Posts: 2,690
|
Re: Orson the 49 GMC ~ Chris C.
we got the PCM mounted and wired today
__________________
www.olesargecustoms.com email: chris@olesargecustoms.com '48 build: http://67-72chevytrucks.com/vboard/s...d.php?t=541904 '33 build: http://67-72chevytrucks.com/vboard/s...=1#post6232888 '49 build: http://67-72chevytrucks.com/vboard/s...=1#post6364475 Last edited by Rickysnickers; 03-31-2021 at 10:18 AM. Reason: flipped pics |
03-30-2021, 10:47 PM | #24 |
Registered User
Join Date: Apr 2010
Location: Warrensburg, MO
Posts: 2,690
|
Re: Orson the 49 GMC ~ Chris C.
There was some bondo cracking
So we removed all the bondo
__________________
www.olesargecustoms.com email: chris@olesargecustoms.com '48 build: http://67-72chevytrucks.com/vboard/s...d.php?t=541904 '33 build: http://67-72chevytrucks.com/vboard/s...=1#post6232888 '49 build: http://67-72chevytrucks.com/vboard/s...=1#post6364475 Last edited by Rickysnickers; 03-31-2021 at 10:20 AM. Reason: flipped pics |
03-30-2021, 10:48 PM | #25 |
Registered User
Join Date: Apr 2010
Location: Warrensburg, MO
Posts: 2,690
|
Re: Orson the 49 GMC ~ Chris C.
We got the Front clip in the basecoat
And the glovebox door has a huge dent in it, I’d like to replace it
__________________
www.olesargecustoms.com email: chris@olesargecustoms.com '48 build: http://67-72chevytrucks.com/vboard/s...d.php?t=541904 '33 build: http://67-72chevytrucks.com/vboard/s...=1#post6232888 '49 build: http://67-72chevytrucks.com/vboard/s...=1#post6364475 Last edited by Rickysnickers; 03-31-2021 at 10:21 AM. Reason: flipped pics |
Bookmarks |
|
|