Engine Bay Wire Gutters/Looms - The 1947 - Present Chevrolet & GMC Truck Message Board Network

schovil69 · 07-19-2021, 12:58 PM

Guys, I have been searching the forum for sources for the wire gutters in the engine bay that go across the top of the fire wall and across the top of the radiator support. I bought a set from Classic Industries that showed up made of a hard plastic rather than the pliable rubber that was installed at the factory. The piece for across the radiator support has pre-drilled holes that do not line up with the holes in the radiator support. It also needs to bend down on each side and this plastic is too hard to make the sharp bend without creating a large arc.

Now I'm a bit nervous to order from other suppliers for fear of acquiring the same poor quality. Is there a good source for these out there?

**HO455** · 07-19-2021, 03:28 PM

I recommend reposting on the pickup side. ( Or have a Moderator move the thread.)
Lots more folks over there and the pieces in question are the same for both Burbans and pickups.

schovil69 · 07-19-2021, 03:39 PM

Thanks for responding. I thought I had posted in the pickup section. I'll post my questions over there.

07-19-2021, 12:58 PM	#1
schovil69 Registered User Join Date: Oct 2013 Location: Lincoln, NE Posts: 115	Engine Bay Wire Gutters/Looms Guys, I have been searching the forum for sources for the wire gutters in the engine bay that go across the top of the fire wall and across the top of the radiator support. I bought a set from Classic Industries that showed up made of a hard plastic rather than the pliable rubber that was installed at the factory. The piece for across the radiator support has pre-drilled holes that do not line up with the holes in the radiator support. It also needs to bend down on each side and this plastic is too hard to make the sharp bend without creating a large arc. Now I'm a bit nervous to order from other suppliers for fear of acquiring the same poor quality. Is there a good source for these out there?

07-19-2021, 03:28 PM	#2
HO455 Post Whore Join Date: Feb 2016 Location: Portland Oregon Posts: 10,804	Re: Engine Bay Wire Gutters/Looms I recommend reposting on the pickup side. ( Or have a Moderator move the thread.) Lots more folks over there and the pieces in question are the same for both Burbans and pickups. __________________ Thanks to Bob and Jeanie and everyone else at Superior Performance for all their great help. RIP Bob Parks. 1967 Burban the WMB,1991 S(stink)-10 Blazer,1969 GTO, 1970 Javelin, 1952 F2 Ford 4X4, 29 Model A, 72 Firebird. 85 Alfa Romeo If it breaks I didn't want it in the first place The WMB repair thread http://67-72chevytrucks.com/vboard/s...d.php?t=698377

07-19-2021, 03:39 PM	#3
schovil69 Registered User Join Date: Oct 2013 Location: Lincoln, NE Posts: 115	Re: Engine Bay Wire Gutters/Looms Thanks for responding. I thought I had posted in the pickup section. I'll post my questions over there.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.