GRIZZ’s ‘79 - 2WD BLAZER Challenge over in London, England. “~It’s not a Project~”

[68Timber]

Personally I’d leave it alone until it gets worse or something happens that requires paint and body and address it then. I wouldn’t notice that on something that’s driven and used.

But if you gotta...

That’s metal, isn’t it? Is it easy to remove? Id try a home repair using the correct auto paint in a rattle can. You’d run the risk of it not being a perfect match, but since it’s a bumper and not a body panel I don’t think you’d notice or that it’d detract any. The only downside is it’s a little tricky, for me at least, to lay down an even coat of clear using a rattle can. Bright sunlight helps.

I’ve been meaning to share this a while now. We all know our phones spy on us and send us targeted ads. I’ve been getting this one ever since you cobbled together the cardboard smoker and made biltong. I’d never heard of it before and didn’t mention it to anyone but apparently my phone knew I was intrigued.

[LT7A]

I didn't understand the part about the personal registration plate, cheap and right.

As far as the front bumper damage, I'm with 68Timber, that the timing on that is when you are doing other body work, possibly fixing the hood from your dearly departed lodger? In the meantime, I would go to a paint store that has a spectrum analyzer and get a match for your gray, possibly take the gas door in? I would not get it in metallic since the metal particles will not lay right when you touch it up and it will contrast. So I would use it sparingly just to dot in the affected places where the substrate shows through. Again, not brush strokes but tiny little dots just to fill in. Then, later, if you have occasion to do a little sanding and filling, you can smooth it out and get a color matched rattle can, like 68Timber said. And finally is the professional repaint if you are having other work done. My thoughts, FWIW.

That little truck is in good hands now. I like the attention to detail you are giving it whilst you enjoy it. (See, I went all British and said whilst. But I know you are from .za)

[Grizz1963]

Originally Posted by 68Timber

Personally I’d leave it alone until it gets worse or something happens that requires paint and body and address it then. I wouldn’t notice that on something that’s driven and used.

But if you gotta...

That’s metal, isn’t it? Is it easy to remove? Id try a home repair using the correct auto paint in a rattle can. You’d run the risk of it not being a perfect match, but since it’s a bumper and not a body panel I don’t think you’d notice or that it’d detract any. The only downside is it’s a little tricky, for me at least, to lay down an even coat of clear using a rattle can. Bright sunlight helps.

I’ve been meaning to share this a while now. We all know our phones spy on us and send us targeted ads. I’ve been getting this one ever since you cobbled together the cardboard smoker and made biltong. I’d never heard of it before and didn’t mention it to anyone but apparently my phone knew I was intrigued.

Well, they are always listening.

At least it is great eating.


Agree with you both on timescale and leaving it alone, and to time and wear n tear.

Originally Posted by LT7A

I didn't understand the part about the personal registration plate, cheap and right.

As far as the front bumper damage, I'm with 68Timber, that the timing on that is when you are doing other body work, possibly fixing the hood from your dearly departed lodger? In the meantime, I would go to a paint store that has a spectrum analyzer and get a match for your gray, possibly take the gas door in? I would not get it in metallic since the metal particles will not lay right when you touch it up and it will contrast. So I would use it sparingly just to dot in the affected places where the substrate shows through. Again, not brush strokes but tiny little dots just to fill in. Then, later, if you have occasion to do a little sanding and filling, you can smooth it out and get a color matched rattle can, like 68Timber said. And finally is the professional repaint if you are having other work done. My thoughts, FWIW.

That little truck is in good hands now. I like the attention to detail you are giving it whilst you enjoy it. (See, I went all British and said whilst. But I know you are from .za)

Not sure if I understand your question regarding license plates, personal vs issued by year of build.

I think maybe leaving the paint alone is the best for now.







My friend Nic, who runs a Turkish tour company and is not averse to Turkish retros......

Has obviously been hit hard by COVID-19 closing his shop.

So in the mean time, he and his wife started to volunteer in Greenhill Gardens in Weymouth where they live.

They go to Portland Sculpture and Quarry Trust, which is where the srone for St Pauls Cathedral in London, came from.

Anyway, he was given a beginners piece to create and carve, sculpt, not sure what you call this work.





Meanwhile, his wife, Sally was allowed to continue with this, maybe she is the more artistic of them.



Progress, starting to look like a Budha.



And Nic’s spider progressing more steadily.



And a bit of a personal piece.




In other news, yesterday morning it was rather chilly here......


Frost.




And a pic, pulled off Facebook.


Now this would float my boat, as an ultimate vision for the truck.


Just need to find a complete, intact Extreme bodykit to fit, and a power hood or whatever it may be called.


Guess that did not take long ehhhhh.





Anyone got any leads on a full bodykit?


Here in the UK preferably.

[Grizz1963]

So, as a follow on, on the body kit posted yesterday, another one,

Remember, taste differs and we are all entitled to our interpretations and applications








Some randomness........

Yup, I know. WTF?

But hey..... someone had the balls, the vision, the cash.



Kids bed in the bed.









Yesterday a redelivery by Royal Mail.

All the way from Texas, thanks Brelen.



Yup.....

Lug nut caps.



I need to get the Anthracite paint, and redo the centre caps, then add them to the truck.

Also need to check the wheel nuts as I have now done about 100miles on the new wheels and ryres.

.

[Grizz1963]

Osteopath beat me up really well today with her gentle touch.

Took me 4 hrs + to recover from the pain and walk upright again.

Crazy.

But the good news is that the sunset was lovely.



Currently truck just needs to wait.

.

[LT7A]

Cool wear and tear on the flown flags. Interesting that he would lay them out on the floor though. Our flag is not to touch the ground and it is to be burned if it does.

[Grizz1963]

Originally Posted by LT7A

Cool wear and tear on the flown flags. Interesting that he would lay them out on the floor though. Our flag is not to touch the ground and it is to be burned if it does.

I did not want to say too much about that.

Gary is ex military himself, same as me, and we always raised and lowered a flag over our shoulders.

I suspect that in the regular run of events, those flags would be replaced by new and who knows, what would normally happen to old ones.

I really love battle weary flags, or those that looks that way.

I think for him it was about laying them out in order to photograph them.

Not sure he would ever intentionally raise any form of disrespect to the Stars and Stripes.

[LT7A]

Originally Posted by Grizz1963

I did not want to say too much about that.

Gary is ex military himself, same as me, and we always raised and lowered a flag over our shoulders.

I suspect that in the regular run of events, those flags would be replaced by new and who knows, what would normally happen to old ones.

I really love battle weary flags, or those that looks that way.

I think for him it was about laying them out in order to photograph them.

Not sure he would ever intentionally raise any form of disrespect to the Stars and Stripes.

Interesting since as you said, he is former military. I didn't assume any disrespect, figured that he was either unaware, or it just didn't occur to him. I love my country but I am not super intense about these types of things. I don't even know when or where I learned it, but it is firmly embedded. I went to the Rose Bowl several years ago when my University team was playing. You are startlingly familiar with things in the US, but just in case, this is American football and pits two teams against each other who are at the top of their particular geographical region. The opposing team had a giant American flag for use during their part of the halftime display. It was large enough to cover a significant portion of the field when all spread out and held by the drill members. Before they used it in their display though, they staged it along the edge of the field...on the ground. And after having deposited it in such a fashion, some of them proceeded to kick it where it had spread out a little bit, in order to bunch it up and get it out of the way. Like I said, I am not Mr. extra-double protocol guy, but I found that disturbing. On the ground? No. Kicking it? Oh no.

[Grizz1963]

Originally Posted by LT7A

Cool wear and tear on the flown flags. Interesting that he would lay them out on the floor though. Our flag is not to touch the ground and it is to be burned if it does.

PS. You just did trigger an interesting question and potential dilemma though.

What would be the correct or usual way to dispose of, these flags, lets say, if they had been hung out by a business.

[Grizz1963]

For me, right now, even driving 14 miles to town and back ends up in some serious pain.

Mate Kevin drove over to see me today from Maidstone and picked up some anthracite paint at Halfords.

I had decided after painting the centre caps silver, that it was not the right colour and needed changing, regardless of outcome.

So a reasonable match it seemed.



First of two coats.

Difference apparent



First coat on.

Second to follow.



Then Sally popped in, on her way home and I managed to seduce her.......

Withone of these, before she headed off to do a load of chores

Bacon (loads of it) and egg toasty sandwich.

.

Then she went off and I added coat one of clear to the anthracite, which perfectly made it a touch darker.



And much later, a second coat of clear





Have to say, I am really pleased with the outcome.

Fitting when I get a chance.


.

[LT7A]

Originally Posted by Grizz1963

PS. You just did trigger an interesting question and potential dilemma though.

What would be the correct or usual way to dispose of, these flags, lets say, if they had been hung out by a business.

That's a good question. I like your idea of displaying them. They certainly do have a lot of character. At first I was thinking one could just fold them up and toss them out. Don't think one would need to keep them around. But probably, proper disposal is by privately burning them so that they would not be seen in the trash or be pulled out and defaced in some way. Funny, I'm not super concerned about people who want to burn the flag publicly. In a way, they're giving it more gravity by making a spectacle out of it. I just hope they support our economy by buying one made in the US. If it wasn't made in the US, is their statement really valid anyway? Ha! And as soon as they've safely put the fire out I would encourage them to move somewhere they think is so much better.

[LT7A]

You got me curious:

The U.S. Flag Code says, “The flag, when it is in such condition that it is no longer a fitting emblem for display, should be destroyed in a dignified way, preferably by burning.” When an American flag is worn beyond repair, it should be retired in a respectful manner.

And even more interesting, and from a reputable source:

https://www.google.com/url?sa=t&sour...=1618388883972

[Grizz1963]

Originally Posted by LT7A

Interesting since as you said, he is former military. I didn't assume any disrespect, figured that he was either unaware, or it just didn't occur to him. I love my country but I am not super intense about these types of things. I don't even know when or where I learned it, but it is firmly embedded. I went to the Rose Bowl several years ago when my University team was playing. You are startlingly familiar with things in the US, but just in case, this is American football and pits two teams against each other who are at the top of their particular geographical region. The opposing team had a giant American flag for use during their part of the halftime display. It was large enough to cover a significant portion of the field when all spread out and held by the drill members. Before they used it in their display though, they staged it along the edge of the field...on the ground. And after having deposited it in such a fashion, some of them proceeded to kick it where it had spread out a little bit, in order to bunch it up and get it out of the way. Like I said, I am not Mr. extra-double protocol guy, but I found that disturbing. On the ground? No. Kicking it? Oh no.

Originally Posted by LT7A

That's a good question. I like your idea of displaying them. They certainly do have a lot of character. At first I was thinking one could just fold them up and toss them out. Don't think one would need to keep them around. But probably, proper disposal is by privately burning them so that they would not be seen in the trash or be pulled out and defaced in some way. Funny, I'm not super concerned about people who want to burn the flag publicly. In a way, they're giving it more gravity by making a spectacle out of it. I just hope they support our economy by buying one made in the US. If it wasn't made in the US, is their statement really valid anyway? Ha! And as soon as they've safely put the fire out I would encourage them to move somewhere they think is so much better.

Originally Posted by LT7A

You got me curious:

The U.S. Flag Code says, “The flag, when it is in such condition that it is no longer a fitting emblem for display, should be destroyed in a dignified way, preferably by burning.” When an American flag is worn beyond repair, it should be retired in a respectful manner.

And even more interesting, and from a reputable source:

https://www.google.com/url?sa=t&sour...=1618388883972

Thank you for the replies.

Really well thought through, and I am certainly 100% with you on not being an Extra-Double Protocol type, but do prefer things to just be right.


Your third entry really makes it clear and I would reference it in future in fact.

Thanks for posting the link too.



I may not be an American, but I do subscribe to so many of your values, many which have been lost over time.

And the flags on display make me feel a bit more at home here in England. Reminding me of my love for many things, American.

[Grizz1963]

Remember this little guy?



Seemed highly unlikely that I would find one randomly, but then randomness is often what drives the fun factor in our hobby.

Just think of the set of ZQ8 wheels that landed in my lap, sold to me by a guy who had no need for them, and did not realise how desperate I was to find a set to put the truck back to standard.

Crazy stuff I know.

It happens.

Yesterday morning when I woke, a Messenger message from a good friend, Ric, in Chandler, Arizona.

Asking whether I had found the rear tailgate pin yet to replace the stud and Nyloc nut currently fitted.

Of course I had not.......

So he offered to post one out to me, taken from his previous race truck, he is a keen Auto Cross driver and has a few other interesting cars stashed away, awaiting his attention.

As he says, at his age, this is an affordable, reasonably safe, and skill improving sport to participate in.

He does compete against all sorts of really powerful and capable kit, being that his truck is s along wheelbase, slow, slightly modified vehicle and his daily. He still works as an auto mechanic.



So the previous truck had two non fault accidents, the second one being part of a 34 car pile up where he was car no 7 in the action.

Leaving Truck No 1 looking sorry for itself.



In the pile up the rear end got bent too, so he bought an identical truck to build the race parts over onto.




So my day yesterday, other than my niggly back, actually ended really well, and another nice sunset.




So much to be said for living rurally.

Centre caps to finally be fitted later today, once they have been in the sun to harden the many coats of clear I added.

Looking forward to this.

[LT7A]

Good point on values. Keeping up my values is a central part of how I'm put together. It seems that values in general are eroding to become something that is situational, conditional - at one's discretion - or worse... convenience. At which point, they become nothing more than weak guidelines, if that. Life is so much better with a well developed value system. Makes it easier to navigate what would otherwise be sticky situations, even though it is uncomfortable, one usually knows what the right thing is to do. That's kind of where the flag perspective comes in for me. I feel sorry for someone who doesn't love and respect their country, but I consider it their loss and don't get too worked up about it. But there are some baseline indicators of respect, and one of those is handling our national symbol with some degree of care. As previously noted, I don't assume your buddy intended any disrespect, but it definitely caught my eye.

Good work on getting your tailgate latch and spindle/lug/ whatever the right word is. It is funny how a simple little part can be so much fun to find and install.

Also, sorry to hear about your back. Sounds awful. Mine is not 100%, and causes me trouble on occasion, but your current situation sounds like it could take the starch out of a guy. And you are accustomed to working on things all of the time. Get the rest you need man, and I have found that core strengthening and overall fitness is something that helps me greatly. FWIW, YMMV.

[Grizz1963]

Originally Posted by LT7A

Good point on values. Keeping up my values is a central part of how I'm put together. It seems that values in general are eroding to become something that is situational, conditional - at one's discretion - or worse... convenience. At which point, they become nothing more than weak guidelines, if that. Life is so much better with a well developed value system. Makes it easier to navigate what would otherwise be sticky situations, even though it is uncomfortable, one usually knows what the right thing is to do. That's kind of where the flag perspective comes in for me. I feel sorry for someone who doesn't love and respect their country, but I consider it their loss and don't get too worked up about it. But there are some baseline indicators of respect, and one of those is handling our national symbol with some degree of care. As previously noted, I don't assume your buddy intended any disrespect, but it definitely caught my eye.

Good work on getting your tailgate latch and spindle/lug/ whatever the right word is. It is funny how a simple little part can be so much fun to find and install.

Also, sorry to hear about your back. Sounds awful. Mine is not 100%, and causes me trouble on occasion, but your current situation sounds like it could take the starch out of a guy. And you are accustomed to working on things all of the time. Get the rest you need man, and I have found that core strengthening and overall fitness is something that helps me greatly. FWIW, YMMV.

My values got me where I am.

Simple.

Getting lucky is cool, and to be honest, I am a fan of paying it forward, so this was a really nice little win.

Back is in a bad way, and I do hope I can get it sorted sooner than later.

You are right on fitness and core strength.





Carrying on.

Three coats of clear.



Colour really is alive in this choice of Anthracite.

Tried the wheel nut covers.



And amazing how different it looks indoors, on a white dogs duvet cover.



On my way back from the osteopath I did a 200 meter detour to check up onthese trees.



Back to getting home, I needed to keep. Moving in order not to seize up.

What better way, than to fit these long overdue and now correctly painted centre caps.



I was walking around the truck after fitting them..... swearing, just repeatedly saying “Dang.... this looks good, this is so right”



And a side shot.





To say I am cuffed is an understatement.


I am so chuffed.


It was the right choice to go with the new wheels.

[Grizz1963]

I am still not tired of this truck.

Yesterday I used it to go to the Osteopath.

Before entering, a slightly faked smile, knowing I have walked out there like a cripple every time before.

She really does not hurt you while working on your spine, but man..... afterwards, even getting off her table is a slow, painful,process.



Afterwards yesterday I went to a favourite place to get a few pics on the new wheels and caps.









How many times can I say that I am so chuffed with how these ended up.

.

[Grizz1963]

A great weekend in Kent.



Sally wanted to get some plants in.

My back continues to say NO.

So she did it all.

I paid.

Strong woman.





Also on the agenda was the go kart that Sally and Mickey unloaded after telling me off and telling me to step back.



Rear wheels and axle are rusted solid, so I called on my last can of bootfair bargain Duck oil, to hopefully penetrate sufficiently.



Offset seating to accommodate the side mounted motor on these.

Two Nylocs, finger tightened held theone side crash protector.

3 minutes to remove.

Thats better.




Sally worked in the garden, I cooked a nice Beef Bhuna curry, now the house smells of air freshener, after having doors and windows open.

A great weekend over all too soon.

[Grizz1963]

.

A small, vital to me parcel landed yesterday.

Thanks Ric, and seeing a rust free, like new.... 20 year old tailgate cable stay is quite refreshing.

Thanks again for the parts for my truck.

[Grizz1963]

So.


If we go for a set of pressed steel American style plates

What plate surrounds?

One in front, one in the rear.





Or this.



.

[Grizz1963]

.


At long last, I pulled the trigger.


Bought a dateless, personal plate for the S10 today.

Disclaimer: This is England, not America or Africa and other places where you could get a much much better, more personal plate.




As has become a way of life for me with the weirdish cars and trucks I buy, nothing is easy.



After spending an extended period getting p1$$€@ around and off by AI , I managed to get transferred to a real,human, and then it came out that the V750 paper document should arrive in 2 weeks, at which point I can then go online and do an online transfer of number onto the truck.



Next step will be getting a pair of CHEAP yellow and white motorbike sized plates at 300mm x 150mm witha single line number.


.

[Grizz1963]

Somewhere

A random gathering.

Started with a text.


































Finally, back home.......

Filled the truck to the neck.




A nice 3 hrs out.

First time in 13 months or more.

[Grizz1963]

.

Who does not like free cash?

Free money all around, if you look.

Sometimes it is not convenient and in the wrong place.

But..... when your neighbour 5 houses down, starts to tear down a whole ground floor extension, in order to get a double storey up, there there is bound to be some collateral damage, and collateral FREE CASH





With the pile growing, while he burns a load of the timber every evening.



So of course, I needed to go have a word, and ask his permission to scavenge some of the timber.

With Sally having a rare day off work, getting her to help, and my back feeling a bit better, I was carrying literally one beam at a time back home.



Back home, Sally actually pulled up a chair and watched me remove nails and screws from the timber, using only remote or “long leverage” in order to not strain the recovery of my back. To be honest, being that I had been virtually painfree for almost a week, I was noit going to mess that up.

So everything was done cautiously, not my usual way tbh.

Examples of the wood being discarded..... 100x100 mm posts, all getting cutt up and burned in the drum of doom.



And then a pile of clean, ready to use wood.



I also used a few lengths to lay out and show Sally where I wanted the driveway concrete strips to be moved to, straightening the drive to a more useful lay.



Hosepipe shows planned curve of new concrete.

Though I may just opt for much straighter lines to make it a lot easier to cast and also for reversing down.

I am thinking of removing the bitsa slab down the bottom and casting it is one.



As a reward, I cooked a meaty dinner, and the steak turned out to be sublime.

We shared one steak, as there were sausages on the menu too.







On Sunday night the Fire of doom was at work again, so I walked home with one 2x4 strip, around 4 meters long, not a nail or screw in it.




Did we mention FREE CASH ?


And yes, it is getting used for a specific project.

[Grizz1963]

Went to the hospital for an appointment with Mr Pillai, spinal surgeon.



Waited an hour.

Great consultant, sensible, logical, supportive.

Showed me the MRI from September last year..... I just smiled, my back is pretty knackered.

He agreed, however, after a thorough history and examination, he said that it seems that the year at home, gaining about 8kg and not being very active, had resulted in a bunch of stuff happening, and also degenerating, plus a random inflammatory response leading to the acute episode.

So he was able to offer surgery - 30% chance of not working, even making it worse, steroid injections - limited effect and not all gain the same benefit, or as we agreed, a conservative approach, which would include further osteopathy, exercise (gentle) and actively looking at weight loss to reduce strain on all related parts.

I can say that right now, I am 100 times better than three four weeks ago when I was really struggling, but at the same time, with the mechanical side of this as a permanent failure, the rest needs to be addressed with caution.

The consultant also said he would give me a 6 month “Get back in for free” ticket, so if things went bad or got worse in the next 6 months, I could contact his secretary and be pushed straight back into the front of the line.

So yesterday I did a small job.

Out with the old....



In with the new.



All better.

Fixed.




Today I made a start with the exercise, and to be honest, it left me hurting a bit, but thats all good.
This time last year I was walking 4 times this distance 4-5 times a week.

Weather was good.



Result.



Here in England, Monday is a public holiday, and in a very rare occurrence, Sally is off on Monday as well.

Plans include a BBQ with friends, and maybe processing some of the wood I rescued. Removing screws and nails.

Oh, and Rum and Pepsi Max tonight fr me, and a glass of sleep inducing wine for Sally.

[Grizz1963]

So Saturday we went to mate Kevin’s for a late lunch at his new home in a small village with some more good friends.

Of course we parked on the road side across from the “village green” and later, I needed to walk a bit, as my back was kicking off.

And found my car confronted by this...........

Prick was my first thought.

Village life, meant someone felt my taxed, legal vehicle should not park on a public road, outside their home.



Why ?’

Just what does this prove, other than that you are a prize sized cock.





My first Bootfair of the year was good.

Spent a total of £31.00 of which £17.00 was for thee kingsize and double bed sheets that were £11.00 vs £39.00 RRP and two Kids T-shirts with colouring pens that wash out for £6.00 for the pair.

Then some plants, 3 vintage toy racing cars for my cabinet. A large Yale lock with two keys for £2.00 a long chain for 50p to tie my trailer down at Uncle Bobs.

A flag flr 50p , a mug for 20p, Harry Pothead luggage tag for 20p some Bayliss and Harding bubble for the main bathroom , and two teapots to be converted into Blue Tit houses for 20p and 50p

Maybe my favourite, was an unused pair of Halcyon bike rider aviator style goggles for £3.00 (go check out what they actually cost)







.