67-72 4x4 LS swap crossmember - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Tomo** · 03-03-2023, 03:37 PM

Are these the only 2 options?

https://www.ecautoandironfabrication...ap-crossmember

https://www.dirtydingo.com/shop/mobi...oducts_id=1408

**Tomo** · 03-03-2023, 06:38 PM

According to this post there is another option.

http://67-72chevytrucks.com/vboard/s...9&postcount=74

This is an old thread has anyone done this more recently? Pictures would be great!

**Tomo** · 03-03-2023, 06:43 PM

Here’s another option.

https://diy4x.com/product.php?produc...cat=252&page=1

**Richard** · 03-04-2023, 05:03 AM

Quote:

Originally Posted by Tomo

Here’s another option.

https://diy4x.com/product.php?produc...cat=252&page=1

This one is nice. I like the removable lower section. Think it is designed for the original motors though. Using with an LS may require adapters and more fabrication. If i would have seen it would have used it over the Pacific Fab member I have in my truck. Would make a few changes as I have the tools.

The ECAuto crossmember is the Pacific fab crossmember used in my truck, just not powder coated. Not a fan of the Dirty Dingo crossmember myself. Though many are good with it.

That Jegs crossmember is interesting. While $100 now it would be a good starting point for an engine mount. More fabrication than others but doable for me.

**Tomo** · 03-04-2023, 07:47 AM

Quote:

Originally Posted by Richard

This one is nice. I like the removable lower section. Think it is designed for the original motors though. Using with an LS may require adapters and more fabrication. If i would have seen it would have used it over the Pacific Fab member I have in my truck. Would make a few changes as I have the tools.

The ECAuto crossmember is the Pacific fab crossmember used in my truck, just not powder coated. Not a fan of the Dirty Dingo crossmember myself. Though many are good with it.

That Jegs crossmember is interesting. While $100 now it would be a good starting point for an engine mount. More fabrication than others but doable for me.

Richard, my assessment is the same. I emailed diy4x for some more info - hopeful they can make it work for the ls.

**Tomo** · 03-04-2023, 08:10 AM

Also I want my k5 at stock height. So my only options are dirty dingo or make my own.

**Tomo** · 03-04-2023, 10:20 PM

1 more option. Rtech, they sell a trans mount too.

https://rtechfabrications.com/produc...e-crossmember/

03-03-2023, 03:37 PM	#1
Tomo Senior Member Join Date: Apr 2016 Location: Indiana Posts: 209	67-72 4x4 LS swap crossmember Are these the only 2 options? https://www.ecautoandironfabrication...ap-crossmember https://www.dirtydingo.com/shop/mobi...oducts_id=1408

03-03-2023, 06:38 PM	#2
Tomo Senior Member Join Date: Apr 2016 Location: Indiana Posts: 209	Re: 67-72 4x4 LS swap crossmember According to this post there is another option. http://67-72chevytrucks.com/vboard/s...9&postcount=74 This is an old thread has anyone done this more recently? Pictures would be great!

03-03-2023, 06:43 PM	#3
Tomo Senior Member Join Date: Apr 2016 Location: Indiana Posts: 209	Re: 67-72 4x4 LS swap crossmember Here’s another option. https://diy4x.com/product.php?produc...cat=252&page=1

03-04-2023, 08:10 AM	#6
Tomo Senior Member Join Date: Apr 2016 Location: Indiana Posts: 209	Re: 67-72 4x4 LS swap crossmember Also I want my k5 at stock height. So my only options are dirty dingo or make my own.

03-04-2023, 10:20 PM	#7
Tomo Senior Member Join Date: Apr 2016 Location: Indiana Posts: 209	Re: 67-72 4x4 LS swap crossmember 1 more option. Rtech, they sell a trans mount too. https://rtechfabrications.com/produc...e-crossmember/



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.