WANTED: tilt steering column for 84 C10 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

84 Chevy · 08-01-2001, 10:41 AM

I am looking for a tilt steering column with delay wiper contols and cruise for an 84 1/2 ton 2WD. I have looked at every salvage yard in my area and they dont have one.

------------------
Russ,
84 C10 Silverado truck

[This message has been edited by 84 Chevy (edited 08-01-2001).]

gchemist · 08-01-2001, 07:34 PM

84 Chevy,

Where do you live? I found a replacement for my truck at A-Ok Chevy & GM parts. They are located in Austin, TX. Call 512-247-4268. Cost was $75. He should have one available for you or he can find you one.

------------------
Gerardo
1983 Custom Truck
TX Plates: "BAD BOW"
http://www.geocities.com/abetterchemist/

brian630 · 08-03-2001, 11:14 PM

I HAVE A TILT COLUMN OUT OF A 78 4X4 JIMMY. IT HAS THE CRUISE OPTION. I CAN SEND PICTURES. WILL SELL FOR $50.00 PLUS SHIPPING.

------------------
'68 sub 4x4 CST
'70 blazer future project
'72 blazer CST current frame off restore
'76 450 mercedes SL (my baby)
' 79 Jimmy driver, project
Brian

**crossy** · 08-04-2001, 08:56 PM

84-87 only from pickups and 84-91 blazers and burbs. DAVE $165 to your door with key. DAVE

**crossy** · 08-26-2001, 10:14 PM

russ, I guess everything I sent really helped if you had it in the same night. glad it worked out , DAVE

timmy · 08-27-2001, 02:33 PM

i have a tilt column out of a 83 truck i will take $50+shipping.i do not have the keys but for another $20 i will put a new lock cylinder in it

08-01-2001, 10:41 AM	#1
84 Chevy Registered User Join Date: Dec 2000 Location: Bogart GA Posts: 6	WANTED: tilt steering column for 84 C10 I am looking for a tilt steering column with delay wiper contols and cruise for an 84 1/2 ton 2WD. I have looked at every salvage yard in my area and they dont have one. ------------------ Russ, 84 C10 Silverado truck [This message has been edited by 84 Chevy (edited 08-01-2001).] __________________ Russ, 84 C10 Silverado truck

08-01-2001, 07:34 PM	#2
gchemist BAD BOW-Silverado XST Join Date: May 2000 Location: Senior Member from Austin, TX Posts: 6,431	84 Chevy, Where do you live? I found a replacement for my truck at A-Ok Chevy & GM parts. They are located in Austin, TX. Call 512-247-4268. Cost was $75. He should have one available for you or he can find you one. ------------------ Gerardo 1983 Custom Truck TX Plates: "BAD BOW" http://www.geocities.com/abetterchemist/ __________________ Gerardo a.k.a. Mad Chemist Silverado XST videos

08-03-2001, 11:14 PM	#3
brian630 Registered User Join Date: Feb 2001 Location: Eagan,MN Posts: 134	I HAVE A TILT COLUMN OUT OF A 78 4X4 JIMMY. IT HAS THE CRUISE OPTION. I CAN SEND PICTURES. WILL SELL FOR $50.00 PLUS SHIPPING. ------------------ '68 sub 4x4 CST '70 blazer future project '72 blazer CST current frame off restore '76 450 mercedes SL (my baby) ' 79 Jimmy driver, project Brian __________________ '70 blazer future project '72 blazer CST current frame off restore Brian

08-04-2001, 08:56 PM	#4
crossy Oh,you can't buy that new Join Date: Apr 2000 Location: Pennsville,N.J. 08070, USA Posts: 2,039	84-87 only from pickups and 84-91 blazers and burbs. DAVE $165 to your door with key. DAVE __________________ "been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone 73 Pinto, stock, w/CragarSS's-eww LOTS of Cummins trucks.

08-26-2001, 10:14 PM	#5
crossy Oh,you can't buy that new Join Date: Apr 2000 Location: Pennsville,N.J. 08070, USA Posts: 2,039	russ, I guess everything I sent really helped if you had it in the same night. glad it worked out , DAVE __________________ "been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone 73 Pinto, stock, w/CragarSS's-eww LOTS of Cummins trucks.

08-27-2001, 02:33 PM	#6
timmy Registered User Join Date: Jun 2001 Location: rayville,la,us Posts: 65	i have a tilt column out of a 83 truck i will take $50+shipping.i do not have the keys but for another $20 i will put a new lock cylinder in it __________________ 71 c-10 307/3 spd in the process of a makeover



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.