Project "SWISS CHEESE" the 68 Camaro - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**LEEVON** · 02-02-2010, 09:35 PM

Here's a little inspiration! http://www.impalas.net/forums/showthread.php?t=686

mcbassin · 02-02-2010, 10:10 PM

Quote:

Originally Posted by LEEVON

Here's a little inspiration! http://www.impalas.net/forums/showthread.php?t=686

Very cool thread in the link! I love how the guy used a bunch of old cars and not repop parts. Defintely inspirational!

nuke1 · 02-03-2010, 06:11 AM

LEEVON, now that is someserious inspiration, my hat off to that guy, that was simply amazing, see, there is other crazy ppl out there, not just me.LOL. Thank you for that article, that was cool, i read every page. That guy had some serious heart and passion in his car, definetly proud of that one. Congrats to him. Just proves a point, anything can be fixed with determination and a little time and resources.

nuke1 · 02-04-2010, 11:31 PM

Well, i went out today and checked on some panels, i think you will like what we have, there is still a few more not there, but that is one heck of a collection.

mcbassin · 02-04-2010, 11:51 PM

I'm assuming these are the good parts you were talking about at Dynacorn? They look really nice! Step by step man.

**LEEVON** · 02-05-2010, 05:44 PM

It looks like you've got a whole new Camaro in pieces on the floor

...

because you do!

**FRENCHBLUE72** · 02-06-2010, 12:43 PM

Looks like a bunch of work is ahead of you but im sure it will be no problem for ya to get her back in one piece..

nuke1 · 02-06-2010, 10:52 PM

Quote:

Originally Posted by mcbassin

I'm assuming these are the good parts you were talking about at Dynacorn? They look really nice! Step by step man.

You bet they are! I will no worries, remember if you missed something to ask.

Quote:

Originally Posted by LEEVON

It looks like you've got a whole new Camaro in pieces on the floor

...

because you do!

LOL, and one in my basement like that too!

Quote:

Originally Posted by FRENCHBLUE72

Looks like a bunch of work is ahead of you but im sure it will be no problem for ya to get her back in one piece..

Thanks bud.

nuke1 · 02-06-2010, 11:02 PM

Got out to the shop this morning, swept it up from last nites mess. I then proceeded to study the car, how bad it actually was. Once i determined, what i was removing, it was time to weld in some bracing. Front to back-side-top. Is not going anywhere and stron, and also not in the way. Once the bracing was in, it was time to bust out the Speacialized tools for some destructive remodeling. I first cut the floor from the skeleton. Once that was done, i determined what pieces from the floor i needed to keep. Then it was cut cut time. Got all that done then swept up again. I proceeded to put the skeleton on my on my dolly and determined again what was gonna have to cut off. There was a tremendous amount, but there will be no rust in this girl any more. Cut off everything i needed to and cleaned up one more time. She is now ready to go to the blasters.

Remember any questions you have, ASK. I will do my best to help you.

nuke1 · 02-06-2010, 11:08 PM

The last two are the keep pile and garbage pile

nuke1 · 02-06-2010, 11:10 PM

some more

nuke1 · 02-06-2010, 11:12 PM

The stars of the show, without them.........

nuke1 · 02-06-2010, 11:14 PM

WOW, looking at the pics it sure was dirty/dusty in there, no wonder i was blowing some black boogies when i came in. ugh.

Sillyoldman · 02-06-2010, 11:42 PM

Quote:

Originally Posted by nuke1

WOW, looking at the pics it sure was dirty/dusty in there, no wonder i was blowing some black boogies when i came in. ugh.

I had my share of black boogies today too

Still wondering why I did not think to grab my respirator. I did find my eye & ear protection. Great thread BTW. ~subscribed~

67ChevyRedneck · 02-07-2010, 01:06 AM

wow...

So what exactly is going to the blasters?

mcbassin · 02-07-2010, 02:33 AM

James,

This is going to be a build to remember. I like the braces I think I can handle it. I wish I had a bigger shop so I could pull the 68 in there and see how bad it really is. Unfortunately it has the dreaded vinyl roof and I know it will be ugly underneath.

nuke1 · 02-07-2010, 09:07 AM

Quote:

Originally Posted by Sillyoldman

I had my share of black boogies today too

Still wondering why I did not think to grab my respirator. I did find my eye & ear protection. Great thread BTW. ~subscribed~

Ya, i wore mine for a bit, should have known better, oh well. all better today.

Quote:

Originally Posted by 67ChevyRedneck

wow...

So what exactly is going to the blasters?

Exactly

Quote:

Originally Posted by mcbassin

James,

This is going to be a build to remember. I like the braces I think I can handle it. I wish I had a bigger shop so I could pull the 68 in there and see how bad it really is. Unfortunately it has the dreaded vinyl roof and I know it will be ugly underneath.

This had a vinyl roof also. Bit only to cover up the piece of tin pop riveted on with 5 gallons of mud. Oh forgot to say but realized yesterday this car was rolled, hit on the rear right, and both qtrs were replaced at some time, well hardly held on. I would personally love to get a 68 camaro, but i know that will never happen in my lifetime. oh well.

hgs_notes · 02-07-2010, 11:28 AM

I think in this case, if a new shell was too expensive, it may have been worth it to find a better donar car. That thing was one speed bump away from dropping and scraping the middle of the car on the pavement.

Buy lots of welding wire and gas, you're going to need it.

mcbassin · 02-07-2010, 01:27 PM

Never say never James.

I know it can happen, you may have to slip below the border to get it though.

69GMCor70Chevy · 02-07-2010, 04:01 PM

Quote:

Originally Posted by nuke1

I would personally love to get a 68 camaro, but i know that will never happen in my lifetime. oh well.

Why? There is one on Saskatoon kijiji for $3500 right now. You have proven time and time again that you can bring these back from the brink! Buy one and get around to it sometime!

nuke1 · 02-07-2010, 04:58 PM

Quote:

Originally Posted by hgs_notes

I think in this case, if a new shell was too expensive, it may have been worth it to find a better donar car. That thing was one speed bump away from dropping and scraping the middle of the car on the pavement.

Buy lots of welding wire and gas, you're going to need it.

Around here you will never find a donor car, ;et alone a cheap one. And yah, one big bump!!!!

Quote:

Originally Posted by mcbassin

Never say never James.

I know it can happen, you may have to slip below the border to get it though.

Very true at that

Quote:

Originally Posted by 69GMCor70Chevy

Why? There is one on Saskatoon kijiji for $3500 right now. You have proven time and time again that you can bring these back from the brink! Buy one and get around to it sometime!

Ha, that car was a SGI salvage car, partsonly can not be registered. The guy was trying to sell it as a registerable car. Yah right. I feel sorry for some guy that might buy that, put work into it and find out that he can never put plates on it. Too bad.

nuke1 · 02-07-2010, 05:03 PM

Well mike came by today and is gonna take the next week and get his skeleton sandblasted so it is ready for me starting next week. However they ordered the wrong frame rails, so order another set before i can do that, but i think i may have a bit of patching to do yet. This will be the rebirth of this car as we all know it now.

69GMCor70Chevy · 02-07-2010, 11:13 PM

Quote:

Originally Posted by nuke1

Ha, that car was a SGI salvage car, partsonly can not be registered. The guy was trying to sell it as a registerable car. Yah right. I feel sorry for some guy that might buy that, put work into it and find out that he can never put plates on it. Too bad.

So that was the one that went for $1200 in the salvage auction? There is another first gen on there now but I would bet the guy wants way more than he should......

67ChevyRedneck · 02-08-2010, 12:51 AM

Hopefully it won't come back with more holes

I had a long talk with my uncle that lives near me down here today, and he may be able to haul my 'bird down for me this summer/fall

IvelDesigns · 02-08-2010, 01:52 AM

wow man. you have balls the size of basketballs taking on a project like that. I can't wait to see how this build goes. What's the final plan? restore it? pro-tour it?

02-02-2010, 09:35 PM	#26
LEEVON Registered User Join Date: Jul 2006 Location: Ozark, MO Posts: 4,887	Re: Project "SWISS CHEESE" the 68 Camaro Here's a little inspiration! http://www.impalas.net/forums/showthread.php?t=686 __________________ '20 Silverado Trail Boss ~ '17 Tahoe ~ '79 K15 Sierra Grande ~ '76 Blazer 2wd ~ '71 Cheyenne swb ~ '55 Pontiac Safari ~'50 3100 bagged ~ '80 Wife ~ Late model kids

02-03-2010, 06:11 AM	#28
nuke1 Registered User Join Date: Jun 2007 Location: Saskatoon, Saskatchewan,: Posts: 2,901	Re: Project "SWISS CHEESE" the 68 Camaro LEEVON, now that is someserious inspiration, my hat off to that guy, that was simply amazing, see, there is other crazy ppl out there, not just me.LOL. Thank you for that article, that was cool, i read every page. That guy had some serious heart and passion in his car, definetly proud of that one. Congrats to him. Just proves a point, anything can be fixed with determination and a little time and resources. __________________ James 1968 GMC "HAVOC" 1986 GMC "Frank" J.J.R.H. Design & Consulting My 68`Rebuild "HAVOC": http://67-72chevytrucks.com/vboard/s...d.php?t=316300 A 58' chev build thread: http://www.67-72chevytrucks.com/vboa...d.php?t=311238 1969 Camaro Pro Touring http://67-72chevytrucks.com/vboard/s...61#post3513361 Swiss Cheese: http://67-72chevytrucks.com/vboard/s...d.php?t=384390 Adjustable Trailing Arm How-To: http://67-72chevytrucks.com/vboard/s...d.php?t=321100 1968 Ford Farm Truck: http://67-72chevytrucks.com/vboard/s...=1#post6555587

02-04-2010, 11:31 PM	#29
nuke1 Registered User Join Date: Jun 2007 Location: Saskatoon, Saskatchewan,: Posts: 2,901	Re: Project "SWISS CHEESE" the 68 Camaro Well, i went out today and checked on some panels, i think you will like what we have, there is still a few more not there, but that is one heck of a collection. Attached Images __________________ James 1968 GMC "HAVOC" 1986 GMC "Frank" J.J.R.H. Design & Consulting My 68`Rebuild "HAVOC": http://67-72chevytrucks.com/vboard/s...d.php?t=316300 A 58' chev build thread: http://www.67-72chevytrucks.com/vboa...d.php?t=311238 1969 Camaro Pro Touring http://67-72chevytrucks.com/vboard/s...61#post3513361 Swiss Cheese: http://67-72chevytrucks.com/vboard/s...d.php?t=384390 Adjustable Trailing Arm How-To: http://67-72chevytrucks.com/vboard/s...d.php?t=321100 1968 Ford Farm Truck: http://67-72chevytrucks.com/vboard/s...=1#post6555587 Last edited by nuke1; 02-04-2010 at 11:39 PM.

02-04-2010, 11:51 PM	#30
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: Project "SWISS CHEESE" the 68 Camaro I'm assuming these are the good parts you were talking about at Dynacorn? They look really nice! Step by step man. __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

02-05-2010, 05:44 PM	#31
LEEVON Registered User Join Date: Jul 2006 Location: Ozark, MO Posts: 4,887	Re: Project "SWISS CHEESE" the 68 Camaro It looks like you've got a whole new Camaro in pieces on the floor ... because you do! __________________ '20 Silverado Trail Boss ~ '17 Tahoe ~ '79 K15 Sierra Grande ~ '76 Blazer 2wd ~ '71 Cheyenne swb ~ '55 Pontiac Safari ~'50 3100 bagged ~ '80 Wife ~ Late model kids Last edited by LEEVON; 02-05-2010 at 05:45 PM.

02-06-2010, 12:43 PM	#32
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,589	Re: Project "SWISS CHEESE" the 68 Camaro Looks like a bunch of work is ahead of you but im sure it will be no problem for ya to get her back in one piece.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

02-06-2010, 11:02 PM	#34
nuke1 Registered User Join Date: Jun 2007 Location: Saskatoon, Saskatchewan,: Posts: 2,901	Re: Project "SWISS CHEESE" the 68 Camaro Got out to the shop this morning, swept it up from last nites mess. I then proceeded to study the car, how bad it actually was. Once i determined, what i was removing, it was time to weld in some bracing. Front to back-side-top. Is not going anywhere and stron, and also not in the way. Once the bracing was in, it was time to bust out the Speacialized tools for some destructive remodeling. I first cut the floor from the skeleton. Once that was done, i determined what pieces from the floor i needed to keep. Then it was cut cut time. Got all that done then swept up again. I proceeded to put the skeleton on my on my dolly and determined again what was gonna have to cut off. There was a tremendous amount, but there will be no rust in this girl any more. Cut off everything i needed to and cleaned up one more time. She is now ready to go to the blasters. Remember any questions you have, ASK. I will do my best to help you. Attached Images __________________ James 1968 GMC "HAVOC" 1986 GMC "Frank" J.J.R.H. Design & Consulting My 68`Rebuild "HAVOC": http://67-72chevytrucks.com/vboard/s...d.php?t=316300 A 58' chev build thread: http://www.67-72chevytrucks.com/vboa...d.php?t=311238 1969 Camaro Pro Touring http://67-72chevytrucks.com/vboard/s...61#post3513361 Swiss Cheese: http://67-72chevytrucks.com/vboard/s...d.php?t=384390 Adjustable Trailing Arm How-To: http://67-72chevytrucks.com/vboard/s...d.php?t=321100 1968 Ford Farm Truck: http://67-72chevytrucks.com/vboard/s...=1#post6555587

02-06-2010, 11:08 PM	#35
nuke1 Registered User Join Date: Jun 2007 Location: Saskatoon, Saskatchewan,: Posts: 2,901	Re: Project "SWISS CHEESE" the 68 Camaro The last two are the keep pile and garbage pile Attached Images __________________ James 1968 GMC "HAVOC" 1986 GMC "Frank" J.J.R.H. Design & Consulting My 68`Rebuild "HAVOC": http://67-72chevytrucks.com/vboard/s...d.php?t=316300 A 58' chev build thread: http://www.67-72chevytrucks.com/vboa...d.php?t=311238 1969 Camaro Pro Touring http://67-72chevytrucks.com/vboard/s...61#post3513361 Swiss Cheese: http://67-72chevytrucks.com/vboard/s...d.php?t=384390 Adjustable Trailing Arm How-To: http://67-72chevytrucks.com/vboard/s...d.php?t=321100 1968 Ford Farm Truck: http://67-72chevytrucks.com/vboard/s...=1#post6555587

02-06-2010, 11:10 PM	#36
nuke1 Registered User Join Date: Jun 2007 Location: Saskatoon, Saskatchewan,: Posts: 2,901	Re: Project "SWISS CHEESE" the 68 Camaro some more Attached Images __________________ James 1968 GMC "HAVOC" 1986 GMC "Frank" J.J.R.H. Design & Consulting My 68`Rebuild "HAVOC": http://67-72chevytrucks.com/vboard/s...d.php?t=316300 A 58' chev build thread: http://www.67-72chevytrucks.com/vboa...d.php?t=311238 1969 Camaro Pro Touring http://67-72chevytrucks.com/vboard/s...61#post3513361 Swiss Cheese: http://67-72chevytrucks.com/vboard/s...d.php?t=384390 Adjustable Trailing Arm How-To: http://67-72chevytrucks.com/vboard/s...d.php?t=321100 1968 Ford Farm Truck: http://67-72chevytrucks.com/vboard/s...=1#post6555587

02-06-2010, 11:12 PM	#37
nuke1 Registered User Join Date: Jun 2007 Location: Saskatoon, Saskatchewan,: Posts: 2,901	Re: Project "SWISS CHEESE" the 68 Camaro The stars of the show, without them......... Attached Images __________________ James 1968 GMC "HAVOC" 1986 GMC "Frank" J.J.R.H. Design & Consulting My 68`Rebuild "HAVOC": http://67-72chevytrucks.com/vboard/s...d.php?t=316300 A 58' chev build thread: http://www.67-72chevytrucks.com/vboa...d.php?t=311238 1969 Camaro Pro Touring http://67-72chevytrucks.com/vboard/s...61#post3513361 Swiss Cheese: http://67-72chevytrucks.com/vboard/s...d.php?t=384390 Adjustable Trailing Arm How-To: http://67-72chevytrucks.com/vboard/s...d.php?t=321100 1968 Ford Farm Truck: http://67-72chevytrucks.com/vboard/s...=1#post6555587

02-06-2010, 11:14 PM	#38
nuke1 Registered User Join Date: Jun 2007 Location: Saskatoon, Saskatchewan,: Posts: 2,901	Re: Project "SWISS CHEESE" the 68 Camaro WOW, looking at the pics it sure was dirty/dusty in there, no wonder i was blowing some black boogies when i came in. ugh. __________________ James 1968 GMC "HAVOC" 1986 GMC "Frank" J.J.R.H. Design & Consulting My 68`Rebuild "HAVOC": http://67-72chevytrucks.com/vboard/s...d.php?t=316300 A 58' chev build thread: http://www.67-72chevytrucks.com/vboa...d.php?t=311238 1969 Camaro Pro Touring http://67-72chevytrucks.com/vboard/s...61#post3513361 Swiss Cheese: http://67-72chevytrucks.com/vboard/s...d.php?t=384390 Adjustable Trailing Arm How-To: http://67-72chevytrucks.com/vboard/s...d.php?t=321100 1968 Ford Farm Truck: http://67-72chevytrucks.com/vboard/s...=1#post6555587

02-07-2010, 01:06 AM	#40
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: Project "SWISS CHEESE" the 68 Camaro wow... So what exactly is going to the blasters? __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!

02-07-2010, 02:33 AM	#41
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: Project "SWISS CHEESE" the 68 Camaro James, This is going to be a build to remember. I like the braces I think I can handle it. I wish I had a bigger shop so I could pull the 68 in there and see how bad it really is. Unfortunately it has the dreaded vinyl roof and I know it will be ugly underneath. __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

02-07-2010, 11:28 AM	#43
hgs_notes GEARHEAD Join Date: Aug 2003 Location: MN Posts: 6,107	Re: Project "SWISS CHEESE" the 68 Camaro I think in this case, if a new shell was too expensive, it may have been worth it to find a better donar car. That thing was one speed bump away from dropping and scraping the middle of the car on the pavement. Buy lots of welding wire and gas, you're going to need it. __________________ If no one knows what you're doing, they can't tell you you're doing it wrong HG's Dream Car Build - Shelby Cobra Kit Build your own adjustable track bar 71 Long Fleet C/10 72 Jimmy 4x4 (Junkyard Jimmy) HG's Plow Truck '78 K35 Dually Bigass Farm Truck HG's thread of miscellaneous stuff

02-07-2010, 01:27 PM	#44
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: Project "SWISS CHEESE" the 68 Camaro Never say never James. I know it can happen, you may have to slip below the border to get it though. __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group



Register or Log In To remove these advertisements.

02-07-2010, 05:03 PM	#47
nuke1 Registered User Join Date: Jun 2007 Location: Saskatoon, Saskatchewan,: Posts: 2,901	Re: Project "SWISS CHEESE" the 68 Camaro Well mike came by today and is gonna take the next week and get his skeleton sandblasted so it is ready for me starting next week. However they ordered the wrong frame rails, so order another set before i can do that, but i think i may have a bit of patching to do yet. This will be the rebirth of this car as we all know it now. Attached Images __________________ James 1968 GMC "HAVOC" 1986 GMC "Frank" J.J.R.H. Design & Consulting My 68`Rebuild "HAVOC": http://67-72chevytrucks.com/vboard/s...d.php?t=316300 A 58' chev build thread: http://www.67-72chevytrucks.com/vboa...d.php?t=311238 1969 Camaro Pro Touring http://67-72chevytrucks.com/vboard/s...61#post3513361 Swiss Cheese: http://67-72chevytrucks.com/vboard/s...d.php?t=384390 Adjustable Trailing Arm How-To: http://67-72chevytrucks.com/vboard/s...d.php?t=321100 1968 Ford Farm Truck: http://67-72chevytrucks.com/vboard/s...=1#post6555587

02-08-2010, 12:51 AM	#49
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: Project "SWISS CHEESE" the 68 Camaro Hopefully it won't come back with more holes I had a long talk with my uncle that lives near me down here today, and he may be able to haul my 'bird down for me this summer/fall __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications! Last edited by 67ChevyRedneck; 02-08-2010 at 12:56 AM.

02-08-2010, 01:52 AM	#50
IvelDesigns Commander Taco Bello Join Date: Sep 2006 Location: Des Moines, Iowa Posts: 2,232	Re: Project "SWISS CHEESE" the 68 Camaro wow man. you have balls the size of basketballs taking on a project like that. I can't wait to see how this build goes. What's the final plan? restore it? pro-tour it? __________________ Bagged '50 3600 - Bumper punchin' road kill since 2009... Bagged '69 C10 Longbed - Bumper punchin' road kill since 2007...

Register or Log In To remove these advertisements.