started working on the 65 suburban - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

gostranger · 08-13-2011, 07:55 PM

Posted via Mobile Devicei finally got the body on!!!!
Posted via Mobile Device

gostranger · 08-13-2011, 08:03 PM

Posted via Mobile Devicei could set up a chair and just stare at it i put in about 80 hours in the last week i was glad to get to this point.what a great week off!!!
Posted via Mobile Device

LT1 Burb · 08-14-2011, 10:12 AM

Quote:

It was my long wide bed frame i already had all the bag work and c knotches all done so it was easier to shorten the frame than redo the suburban frame

Gotcha, starting to look killer.

**aerotruk63** · 08-14-2011, 10:25 AM

Just awesome, man does that look good!

gostranger · 08-14-2011, 10:52 AM

Thanks for the comments i love the look cant wait to get a little further next get it running and get the compressor and valves in it!
Posted via Mobile Device

Dinos63 · 08-14-2011, 11:26 AM

nice work looks killer dave

gostranger · 08-14-2011, 03:25 PM

Quote:

Originally Posted by Dinos63

nice work looks killer dave

Thanks i wish i had another week off next month i will have another week to get it further i cant wait!
Posted via Mobile Device

64shortc10 · 08-15-2011, 12:13 AM

That thing looks mean on the ground!
Tony from Norcal
Posted via Mobile Device

gostranger · 08-15-2011, 06:57 AM

Quote:

Originally Posted by 64shortc10

That thing looks mean on the ground!
Tony from Norcal
Posted via Mobile Device

thanks!!

csa daddy · 08-15-2011, 05:30 PM

damn thats sexy right there slow an steady wins the race though. dave you still miles ahead of me on my 64 so keep chugging along an you will get there. but again that thing is awesome

gostranger · 08-15-2011, 08:09 PM

Quote:

Originally Posted by csa daddy

damn thats sexy right there slow an steady wins the race though. dave you still miles ahead of me on my 64 so keep chugging along an you will get there. but again that thing is awesome

Hey thanks i am going to keep after it hpe to have it running and moving and the air ride setup done at the end of next month¡¡
Posted via Mobile Device

gostranger · 08-23-2011, 02:47 PM

has anyone bought body mounts? suggestions on rubber or urathane???

gostranger · 08-26-2011, 08:52 AM

sorry guys i couldnt resist a few more pics i stopped over to check a couple things on the sub i am so stoked to have it on the ground finally!!

66redw/white · 09-11-2011, 05:13 PM

this thing is absolutely sick man. my wife has me on the hunt for one and this is just how she wants hers to sit. very nice.

Driveway Dreams · 09-11-2011, 05:28 PM

Looks really good sitting on the ground. Cant wait for some rolling shots of.

gostranger · 09-11-2011, 07:33 PM

Quote:

Originally Posted by 66redw/white

this thing is absolutely sick man. my wife has me on the hunt for one and this is just how she wants hers to sit. very nice.

Wow your wife has awesome taste!!!!! i got the new body mounts so i hopet get the body mounted to the frame to see how low it really will be thanks for the comments i think cbrown on this forum has one for sale
Posted via Mobile Device

gostranger · 09-11-2011, 07:39 PM

Quote:

Originally Posted by Driveway Dreams

Looks really good sitting on the ground. Cant wait for some rolling shots of.

I hope to have some rolling shots at the end of the month! thanks for the comments cant wait to get the blue on the body i am also going to paint the rims where the black is the same blue the blue that is on the fire wall also looking to maybe upsize to 22s at least on the rear same rims.
thanks to everyone for the great comments i will do my best to keep the pics comming
Posted via Mobile Device

padresag · 09-11-2011, 08:14 PM

Quote:

Originally Posted by gostranger

Wow your wife has awesome taste!!!!! i got the new body mounts so i hopet get the body mounted to the frame to see how low it really will be thanks for the comments i think cbrown on this forum has one for sale
Posted via Mobile Device

where did you find the mounts?
ron

gostranger · 09-12-2011, 06:24 AM

Quote:

Originally Posted by padresag

where did you find the mounts?
ron

i got the truck mounts for the main mounting (4 front) and the small square mounts(rear) were in decent shape so i am going to reuse them.

padresag · 09-12-2011, 10:30 AM

only the frt 2 cab mounts work. the ones at the "B" pillar take the small rectangular ones as like the rest of the rear ones
ron

gostranger · 09-13-2011, 08:10 AM

here is the kit i hope to try to clear up weather i can use all 4 mounts the rear mounts seem smaller and are close to the right thickness here is a picture

padresag · 09-16-2011, 02:15 AM

that top insulator for that "b" pillar mount that you have there in the kit is .250" thicker + .125" for the big flat washer than the orig that goes in there inc the flat steel plate which is laminated to the orig. so in total there is .375" difference
ron

*project 67 sub* · 09-16-2011, 03:17 AM

is the rear of the frame bent, or is it just the way its sitting in that pic???

gostranger · 09-16-2011, 06:08 AM

i am using a truck frame and that rear section is a suburban frame that has been cut off i will cut it to fit and weld it to the truck frame as the rear bumper bolts directly to it so it is just hanging there not attached good eye!!!

*project 67 sub* · 09-16-2011, 03:57 PM

ahh ok

08-13-2011, 07:55 PM	#101
gostranger 65 suburban vortec 5.3 bagged Join Date: Jun 2005 Location: upstate new york Posts: 1,317	Re: started working on the 65 suburban Posted via Mobile Devicei finally got the body on!!!! Posted via Mobile Device Attached Images

08-13-2011, 08:03 PM	#102
gostranger 65 suburban vortec 5.3 bagged Join Date: Jun 2005 Location: upstate new york Posts: 1,317	Re: started working on the 65 suburban Posted via Mobile Devicei could set up a chair and just stare at it i put in about 80 hours in the last week i was glad to get to this point.what a great week off!!! Posted via Mobile Device Attached Images

08-14-2011, 10:25 AM	#104
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,625	Re: started working on the 65 suburban Just awesome, man does that look good! __________________ 1963 *Chevrolet Truck* Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original *Chevrolet Truck* Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1

08-14-2011, 10:52 AM	#105
gostranger 65 suburban vortec 5.3 bagged Join Date: Jun 2005 Location: upstate new york Posts: 1,317	Re: started working on the 65 suburban Thanks for the comments i love the look cant wait to get a little further next get it running and get the compressor and valves in it! Posted via Mobile Device

08-14-2011, 11:26 AM	#106
Dinos63 chevy only Join Date: Sep 2006 Location: Phoenix, AZ Posts: 6,619	Re: started working on the 65 suburban nice work looks killer dave __________________ CHEVY ONLY... Nothin Else !

08-15-2011, 12:13 AM	#108
64shortc10 Registered User Join Date: Jan 2007 Location: Winters, Ca. Posts: 1,069	Re: started working on the 65 suburban That thing looks mean on the ground! Tony from Norcal Posted via Mobile Device

08-15-2011, 05:30 PM	#110
csa daddy Registered User Join Date: May 2005 Location: evington,va Posts: 1,200	Re: started working on the 65 suburban damn thats sexy right there slow an steady wins the race though. dave you still miles ahead of me on my 64 so keep chugging along an you will get there. but again that thing is awesome

08-23-2011, 02:47 PM	#112
gostranger 65 suburban vortec 5.3 bagged Join Date: Jun 2005 Location: upstate new york Posts: 1,317	Re: started working on the 65 suburban has anyone bought body mounts? suggestions on rubber or urathane???

08-26-2011, 08:52 AM	#113
gostranger 65 suburban vortec 5.3 bagged Join Date: Jun 2005 Location: upstate new york Posts: 1,317	Re: started working on the 65 suburban sorry guys i couldnt resist a few more pics i stopped over to check a couple things on the sub i am so stoked to have it on the ground finally!! Attached Images

09-11-2011, 05:13 PM	#114
66redw/white made in america Join Date: May 2010 Location: baton rouge la Posts: 653	Re: started working on the 65 suburban this thing is absolutely sick man. my wife has me on the hunt for one and this is just how she wants hers to sit. very nice. __________________ 2005 gmc sierra- 4/6, t56, cammed 5.3. 4.10, big bars, and brakes. sounds good 1964 c10-283 powerpack, 3 on the tree 2004 corvette- lowered, borla, tuned. slow my old girl 1966 c10- 305v8, t-5 sold

09-11-2011, 05:28 PM	#115
Driveway Dreams I have car A.D.D. Join Date: Feb 2009 Location: Greeley, Northern Colorado Posts: 4,147	Re: started working on the 65 suburban Looks really good sitting on the ground. Cant wait for some rolling shots of. __________________ -Gerald Building vehicles in memory of the first "car guy" I ever knew, my Grandpa. Bob Dunham 1935-2009. Rest in peace. 61 GMC Suburban SOLD The 86 build thread SOLD Are you a Colorado member?Click here.

09-12-2011, 10:30 AM	#120
padresag Registered User Join Date: Feb 2008 Location: Sidney,b.c. Posts: 4,425	Re: started working on the 65 suburban only the frt 2 cab mounts work. the ones at the "B" pillar take the small rectangular ones as like the rest of the rear ones ron

09-13-2011, 08:10 AM	#121
gostranger 65 suburban vortec 5.3 bagged Join Date: Jun 2005 Location: upstate new york Posts: 1,317	Re: started working on the 65 suburban here is the kit i hope to try to clear up weather i can use all 4 mounts the rear mounts seem smaller and are close to the right thickness here is a picture Attached Images

09-16-2011, 02:15 AM	#122
padresag Registered User Join Date: Feb 2008 Location: Sidney,b.c. Posts: 4,425	Re: started working on the 65 suburban that top insulator for that "b" pillar mount that you have there in the kit is .250" thicker + .125" for the big flat washer than the orig that goes in there inc the flat steel plate which is laminated to the orig. so in total there is .375" difference ron

09-16-2011, 03:17 AM	#123
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Re: started working on the 65 suburban is the rear of the frame bent, or is it just the way its sitting in that pic???



Register or Log In To remove these advertisements.

09-16-2011, 06:08 AM	#124
gostranger 65 suburban vortec 5.3 bagged Join Date: Jun 2005 Location: upstate new york Posts: 1,317	Re: started working on the 65 suburban i am using a truck frame and that rear section is a suburban frame that has been cut off i will cut it to fit and weld it to the truck frame as the rear bumper bolts directly to it so it is just hanging there not attached good eye!!!

09-16-2011, 03:57 PM	#125
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Re: started working on the 65 suburban ahh ok

Register or Log In To remove these advertisements.