TN 2 - 292 engines with mounts / perches / emblems - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Grumpy old man** · 05-15-2022, 11:37 AM

I'm selling off all my 292 / 6 cylinder engines and parts .

2 - 292 engines with hard to find perches on engine stands , Chevy script valve cover , extra oil pan , valve cover , 2 air cleaners . set of .40 over pistons . it's all in the way gotta go . $700.00 come and get them before they go on Craigslist .

I'll add better pictures later today .

A/C bracket no longer available .

**cwcarpenter98** · 05-15-2022, 11:53 AM

Member CarolinaHD is looking for a 292

**MikeB** · 05-15-2022, 12:06 PM

Man, I would have jumped on that a few years ago when I was looking to replace a very tired 250 in an 82 C10. Ended up going the 350 route, but will always have a soft spot for the big six.

**Grumpy old man** · 05-15-2022, 12:22 PM

Quote:

Originally Posted by cwcarpenter98

Member CarolinaHD is looking for a 292

I think I talked to him a while back , he wanted build paper work and I don't have any of that , I've never run these engines , I had planned on using 1 in my 67 but decided to switch to a 350 . Sold as is where is . no shipping , They are just in my way and I'm already short of space .

I also have a 67 short bed frame , 67 long bed frame and a few 67 cabs with matching titles to the frames I'll be listing as i have time . It's all got to go .

**MikeB** · 05-15-2022, 01:11 PM

Quote:

Originally Posted by Grumpy old man

I'll be listing as i have time . It's all got to go .

Will that still leave you with a truck? Is your health OK?

**Grumpy old man** · 05-15-2022, 01:43 PM

Quote:

Originally Posted by MikeB

Will that still leave you with a truck? Is your health OK?

haha , Yeah I'm fine I just need more space to finish my truck and extra projects need a new home , if i have more space I'll get my 67 done a lot faster , And I've just been saving too many parts and pieces . it's just time to let a lot of good stuff go .

**CarolinaHD** · 05-15-2022, 09:07 PM

I'll take all of it, I can come get it this week if that's ok

**Grumpy old man** · 05-16-2022, 08:12 AM

It's yours . PM Sent .

**67 twins** · 05-18-2022, 01:16 AM

If for any reason CAROLINA HD doesn't complete the purchase, I would be interested.

**Grumpy old man** · 05-18-2022, 07:47 AM

Quote:

Originally Posted by 67 twins

If for any reason CAROLINA HD doesn't complete the purchase, I would be interested.

I think that's a done deal at this point , I could have parted all this off and made more but I'm happy to see them going back to work in another truck , I've pretty much had guys picking up parts every day this past week . Seats/doors/ gauge panels are getting shipped out , I just needed the space .

**michael bustamante** · 05-18-2022, 12:28 PM

Quote:

Originally Posted by Grumpy old man

haha , Yeah I'm fine I just need more space to finish my truck and extra projects need a new home , if i have more space I'll get my 67 done a lot faster , And I've just been saving too many parts and pieces . it's just time to let a lot of good stuff go .

i know this struggle. i have my 69 with a 292 that i wanted for a daily up for salew now and ive sold good 67 parts to make room and money for my 67 build

C3pilot · 05-18-2022, 01:21 PM

Put me on the list if the sale falls through. Thx! C3Pilot

**CarolinaHD** · 06-08-2022, 07:14 PM

Took me awhile but finally got up there and cleaned him out.

Good meeting ya!

05-15-2022, 11:37 AM	#1
Grumpy old man Senior Member Join Date: Dec 2013 Location: Gods country East,Tn Posts: 8,545	2 - 292 engines with mounts / perches / emblems I'm selling off all my 292 / 6 cylinder engines and parts . 2 - 292 engines with hard to find perches on engine stands , Chevy script valve cover , extra oil pan , valve cover , 2 air cleaners . set of .40 over pistons . it's all in the way gotta go . $700.00 come and get them before they go on Craigslist . I'll add better pictures later today . A/C bracket no longer available . Attached Images __________________ 1967 Factory short bed - Old school '71 - 350 / 4bolt / 487 heads / Edelbrock C3BX Muncie M-22 4 speed / Hurst Comp plus Factory 12 bolt posi 3.73 / 255-70-15 Smoothed firewall / Factory cowl induction Power disc brakes / power steering / 3.5-5" drop

05-15-2022, 11:53 AM	#2
cwcarpenter98 Senior Member Join Date: Jan 2018 Location: Hickory Flat, GA Posts: 4,426	Re: 2 - 292 engines with mounts / perches / emblems Member CarolinaHD is looking for a 292 __________________ Christian Carpenter 1963 C10 - Frankentruck 283, 3 speed with overdrive Overdrive wiring here 1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson

05-15-2022, 12:06 PM	#3
MikeB Senior Member Join Date: Jul 2000 Location: North Texas Posts: 3,430	Re: 2 - 292 engines with mounts / perches / emblems Man, I would have jumped on that a few years ago when I was looking to replace a very tired 250 in an 82 C10. Ended up going the 350 route, but will always have a soft spot for the big six. __________________ Mike 1969 C10 LWB -- owned for 34 years. 350/TH350, 3.08 posi, 1st Gen Vintage Air, AAW wiring harness, 5-lug conversion, 1985 spindles and brakes. 1982 C10 SWB -- sold 1981 C10 Silverado LWB -- sold, but wish I still had it! 1969 C10 (not the current one) that I bought in the early 1980s. Paid $1200; sold for $1500 a few years later. Just a hint at the appreciation that was coming. Retired as a factory automation products salesman. Worked part-time over the years for an engine builder and a classic car repair shop. Member here for 23 years! This is the very first car/truck Internet forum I joined. I still used a dial-up modem back then!

05-15-2022, 09:07 PM	#7
CarolinaHD Moderator Join Date: Aug 2017 Location: Cabarrus Posts: 406	Re: 2 - 292 engines with mounts / perches / emblems I'll take all of it, I can come get it this week if that's ok __________________ Alex 1967 C50 292ci Lumber truck 1967 C50 292ci Dump truck 1967 C60 366ci Fire truck Last edited by CarolinaHD; 05-15-2022 at 10:21 PM.

05-16-2022, 08:12 AM	#8
Grumpy old man Senior Member Join Date: Dec 2013 Location: Gods country East,Tn Posts: 8,545	Re: 2 - 292 engines with mounts / perches / emblems It's yours . PM Sent . __________________ 1967 Factory short bed - Old school '71 - 350 / 4bolt / 487 heads / Edelbrock C3BX Muncie M-22 4 speed / Hurst Comp plus Factory 12 bolt posi 3.73 / 255-70-15 Smoothed firewall / Factory cowl induction Power disc brakes / power steering / 3.5-5" drop

05-18-2022, 01:16 AM	#9
67 twins Senior Member Join Date: Mar 2019 Location: Herculaneum MO (20 minutes south of St. Louis Posts: 591	Re: 2 - 292 engines with mounts / perches / emblems If for any reason CAROLINA HD doesn't complete the purchase, I would be interested. __________________ 67 C10 283 T5 swapped longbed fleetside = wife's daily driver 67 C20 292 (originally a 250)4speed longbed fleetside w/original wooden bed=my project truck 67 C10 283+.060 (so a 292 as well)T5 swapped longbed fleetside=my DD 72 C1500 Sierra Grande 350 TH350 longbed fleetside=wife's fair weather truck Can you tell we are fans of longbed fleetsides & 67s Chris

05-18-2022, 01:21 PM	#12
C3pilot Registered User Join Date: Mar 2018 Location: Bluffton SC Posts: 114	Re: 2 - 292 engines with mounts / perches / emblems Put me on the list if the sale falls through. Thx! C3Pilot

06-08-2022, 07:14 PM	#13
CarolinaHD Moderator Join Date: Aug 2017 Location: Cabarrus Posts: 406	Re: 2 - 292 engines with mounts / perches / emblems Took me awhile but finally got up there and cleaned him out. Good meeting ya! __________________ Alex 1967 C50 292ci Lumber truck 1967 C50 292ci Dump truck 1967 C60 366ci Fire truck



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.