What did you do to your truck today! - Page 102 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

wwotr · 08-05-2011, 05:04 PM

Quote:

Originally Posted by bigdogboxers

listed mine for sale today.... sad day

Sorry to hear that.
Gotta a story you'd care to share...behind the reason foir selling it?

bigdogboxers · 08-05-2011, 05:09 PM

2 teenage boys with cars no more room so 1 of my 2 trucks must go decided to keep the 1962 gmc short bed. and sell the 1970 with 68 nose k10 4x4 and keep the motor for the 62... not having the room sucks.

wwotr · 08-05-2011, 05:16 PM

Quote:

Originally Posted by bigdogboxers

2 teenage boys with cars no more room so 1 of my 2 trucks must go decided to keep the 1962 gmc short bed. and sell the 1970 with 68 nose k10 4x4 and keep the motor for the 62... not having the room sucks.

YOUCH!
I HATE when you have to make "Priority Adult Decisions" like that.
I'd be telling MY Sons, to go buy some Car Covers,
cause Daddy's Toys are stayin put.

(I'm just sayin'.........)

dukcaln · 08-05-2011, 07:59 PM

took the 3 layers of header wrap off today.... man the guy did a good job wrapping them, but I did find spots of surface rust only....
after

before, and it was 3 layers

*stich626* · 08-05-2011, 08:06 PM

dreamed it was done and installed the new plates..

JayDubBlazer · 08-05-2011, 10:21 PM

put K5 emblems on the side so people will stop calling it a bronco. At least they could call it a scout.

67Slider · 08-05-2011, 11:41 PM

Quote:

Originally Posted by JayDubBlazer

put K5 emblems on the side so people will stop calling it a bronco. At least they could call it a scout.

LOL. I had a 78 Scout II and sure wish I still had it.

Would rather have a Blazer but it was a fun rig.

RossRinSD · 08-05-2011, 11:49 PM

Got my beat up old bumper off

And, trying to figure out how to put gas in the 'soon to be installed' blazer tank.

**americanmusc1e** · 08-06-2011, 12:10 PM

booty-fabbed a backing plate with studs and a pushrod guideplate for my clutch master..... for the hydraulic clutch SM465 swap.....

belowme51 · 08-06-2011, 12:57 PM

finished installing and adjusting my Accuair E-level sensors.

sjarrett71 · 08-06-2011, 01:44 PM

Installed my new hood. Kinda diggin the color!

ItsRandy · 08-06-2011, 09:33 PM

I installed my new Wilwood 2 piston front calipers. Repacked the front wheel bearings and installed new grease seals.

chevytruckluver · 08-06-2011, 10:16 PM

finished cleaning the bottom of the cab and sprayed on Raptor liner

fast50ranger · 08-06-2011, 10:17 PM

Took the tonneau cover off of my 09 Sierra and put on my 67. Fits good. Post pics later. Oh yeah I cut and buffed the paint yesterday. Made a heck of a difference. First time running a rotary buffer. Pics to follow

dukcaln · 08-06-2011, 10:35 PM

O crap....let the wife drive it for the first time......

RossRinSD · 08-06-2011, 11:12 PM

I got some new bumper mounts made up.

New brackets on top of the old one. You can see the difference in thickness.

And, the bumper all cut out. Lots of grinding and welding tomorrow.

solar649 · 08-06-2011, 11:26 PM

looked over a few small wiring issues. Truck was converted frm eternal regulator to one wire. So had some extra wires and regulator in the truck.

installed a relay to cut power to electric fan when the truck is turned off. before this the fan would still run after the truck ignition was off. This was till the temp got below 150 degrees. No the fan is controlled by ingnition realy and adjustable fan temp control.

additonally I installed a new fuel filter. took out the little clear filter and installed a fram 1/2 quart filter under the cab on he frame rail.

6772owner · 08-07-2011, 10:07 AM

I did it a few days back, but I installed my new Viair 380C to replace my blown up 100C I had been babying since last year. I had to relocate everything because of the sheer size of the new compressor vs. the old one. The compressor is now on the drivers side framerail behind the cab and the airtank is under the cab.

Here are some pics.

chevytruckluver · 08-07-2011, 10:20 AM

Quote:

Originally Posted by 6772owner

I did it a few days back, but I installed my new Viair 380C to replace my blown up 100C I had been babying since last year. I had to relocate everything because of the sheer size of the new compressor vs. the old one. The compressor is now on the drivers side framerail behind the cab and the airtank is under the cab.

Here are some pics.

How does the new set up work? compared to the old one

6772owner · 08-07-2011, 10:50 AM

Oh its a hundred fold better compressor, 100% duty cycle and 200 psi makes a huge difference... I just wish I had a bigger tank now, more reserve would be great. Overall I love it though, much faster and I don't have to worry about the 15% duty cycle anymore.
Posted via Mobile Device

magwakeenercew2jh · 08-07-2011, 03:22 PM

Unboxed all the Vintage Air stuff in the garage, put it in the car, and took it in smaller boxes to the shop.

Put in the new air-battery box. Played around to try and fit the new radiator. It's gonna take some cutting on the core.

That battery box fit was a b%&ch. Partly, I guess, foreign part jigs...And partly, squeezing it up into the spot that the new inner fender occupies.

Repainted the spots that had paint on them that made me mad.

RossRinSD · 08-07-2011, 04:01 PM

Quote:

Originally Posted by 6772owner

Oh its a hundred fold better compressor, 100% duty cycle and 200 psi makes a huge difference... I just wish I had a bigger tank now, more reserve would be great. Overall I love it though, much faster and I don't have to worry about the 15% duty cycle anymore.
Posted via Mobile Device

I'll bet if you put a water trap in between the compresser and tank, you'll really like it. I had an S10, and was rebuilding a valve every couple of weeks, after the water trap, no stuck valves until I sold the truck.

dukcaln · 08-07-2011, 07:13 PM

my first oil change since i bought the truck July 3rd... its the 3rd oil change i think since break in on new build... I went with wix filter and rotella 15-40

also re-routed plug wires

profe56 · 08-07-2011, 09:31 PM

I bought the oil to make oil change but I couldn't find the old cartridge oil filter, I think I should make the conversion to new type

RossRinSD · 08-08-2011, 12:23 AM

I put the Honda Blocker on my truck today.

08-05-2011, 05:09 PM	#2
bigdogboxers Registered User Join Date: Aug 2009 Location: Rathdrum Idaho Posts: 197	Re: What did you do to your truck today! 2 teenage boys with cars no more room so 1 of my 2 trucks must go decided to keep the 1962 gmc short bed. and sell the 1970 with 68 nose k10 4x4 and keep the motor for the 62... not having the room sucks.

08-05-2011, 07:59 PM	#4
dukcaln Registered User Join Date: Jul 2011 Location: vacaville ca Posts: 1,304	Re: What did you do to your truck today! took the 3 layers of header wrap off today.... man the guy did a good job wrapping them, but I did find spots of surface rust only.... after before, and it was 3 layers __________________ 04 CHEVY LLY LS DURAMAX 4WD. MODS TO FOLLOW, EFI LIVE, BUILT TRANS, LBZ MP, LIFT PUMP *SOLD* 1972 chevy c10

08-05-2011, 08:06 PM	#5
stich626 Account Suspended Join Date: Sep 2010 Location: hingham ma Posts: 1,721	Re: What did you do to your truck today! dreamed it was done and installed the new plates..

08-05-2011, 10:21 PM	#6
JayDubBlazer go cyclones Join Date: Jun 2003 Location: Ames, IA Posts: 1,885	Re: What did you do to your truck today! put K5 emblems on the side so people will stop calling it a bronco. At least they could call it a scout. __________________ Wes PROJECT OLE GREEN 1972 Blazer 4X4 350/700R4 2017 Silverado LT

08-05-2011, 11:49 PM	#8
RossRinSD Registered User Join Date: Feb 2010 Location: Fallbrook, CA Posts: 98	Re: What did you do to your truck today! Got my beat up old bumper off And, trying to figure out how to put gas in the 'soon to be installed' blazer tank.

08-06-2011, 12:10 PM	#9
americanmusc1e Senior Member Join Date: Jan 2009 Location: Austin, TX Posts: 1,079	Re: What did you do to your truck today! booty-fabbed a backing plate with studs and a pushrod guideplate for my clutch master..... for the hydraulic clutch SM465 swap..... __________________ -- Josh Instagram: @americanmusc1e OLD SKOOL-- 1970 C10. 454/Th400/3.07 posi Build Thread FARM TRUCK----1949 Chevrolet 3800 Power Wagon Hauler Build Thread 1999 4wd OBS Tahoe - daily. DM me if you can't see photos i posted

08-06-2011, 12:57 PM	#10
belowme51 Registered User Join Date: Mar 2010 Location: roanoke va Posts: 582	Re: What did you do to your truck today! finished installing and adjusting my Accuair E-level sensors.

08-06-2011, 01:44 PM	#11
sjarrett71 Registered User Join Date: Dec 2006 Location: Rolla, MO Posts: 2,463	Re: What did you do to your truck today! Installed my new hood. Kinda diggin the color! __________________ -Scott-

08-06-2011, 09:33 PM	#12
ItsRandy Registered User Join Date: Nov 2010 Location: Grand Terrace, Ca. Posts: 1,607	Re: What did you do to your truck today! I installed my new Wilwood 2 piston front calipers. Repacked the front wheel bearings and installed new grease seals.

08-06-2011, 10:16 PM	#13
chevytruckluver Eat, Sleep, Drive a Chevy Join Date: Apr 2010 Location: the town of the cow, Texas Posts: 1,152	Re: What did you do to your truck today! finished cleaning the bottom of the cab and sprayed on Raptor liner Attached Images __________________ Trey Silence may be Golden, but Duct Tape is Silver! 72 Short Step 57 "big window" short step

08-06-2011, 10:17 PM	#14
fast50ranger Registered User Join Date: Mar 2007 Location: Marbury, Alabama Posts: 195	Re: What did you do to your truck today! Took the tonneau cover off of my 09 Sierra and put on my 67. Fits good. Post pics later. Oh yeah I cut and buffed the paint yesterday. Made a heck of a difference. First time running a rotary buffer. Pics to follow __________________ Big Block Powered

08-06-2011, 10:35 PM	#15
dukcaln Registered User Join Date: Jul 2011 Location: vacaville ca Posts: 1,304	Re: What did you do to your truck today! O crap....let the wife drive it for the first time...... __________________ 04 CHEVY LLY LS DURAMAX 4WD. MODS TO FOLLOW, EFI LIVE, BUILT TRANS, LBZ MP, LIFT PUMP *SOLD* 1972 chevy c10

08-06-2011, 11:12 PM	#16
RossRinSD Registered User Join Date: Feb 2010 Location: Fallbrook, CA Posts: 98	Re: What did you do to your truck today! I got some new bumper mounts made up. New brackets on top of the old one. You can see the difference in thickness. And, the bumper all cut out. Lots of grinding and welding tomorrow.

08-06-2011, 11:26 PM	#17
solar649 Registered User Join Date: Mar 2011 Location: cleveland, ohio Posts: 20	Re: What did you do to your truck today! looked over a few small wiring issues. Truck was converted frm eternal regulator to one wire. So had some extra wires and regulator in the truck. installed a relay to cut power to electric fan when the truck is turned off. before this the fan would still run after the truck ignition was off. This was till the temp got below 150 degrees. No the fan is controlled by ingnition realy and adjustable fan temp control. additonally I installed a new fuel filter. took out the little clear filter and installed a fram 1/2 quart filter under the cab on he frame rail.

08-07-2011, 10:07 AM	#18
6772owner Gearhead Join Date: Jan 2008 Location: Colorado Posts: 1,193	Re: What did you do to your truck today! I did it a few days back, but I installed my new Viair 380C to replace my blown up 100C I had been babying since last year. I had to relocate everything because of the sheer size of the new compressor vs. the old one. The compressor is now on the drivers side framerail behind the cab and the airtank is under the cab. Here are some pics. __________________ 2002 Saturn SL2, My D/D 2019 Ford Fusion SE, Ecoboost - Wife's D/D 1993 Camaro Z28, A4, CAI, Cat-Back Exhaust Project C10 (my 72' C10 w/96' LT1, 700R4, bagged F&R, 18's (for now), Short/Fleet) -- SOLD! Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=313644 Last edited by 6772owner; 08-07-2011 at 10:08 AM. Reason: text



Register or Log In To remove these advertisements.

08-07-2011, 10:50 AM	#20
6772owner Gearhead Join Date: Jan 2008 Location: Colorado Posts: 1,193	Re: What did you do to your truck today! Oh its a hundred fold better compressor, 100% duty cycle and 200 psi makes a huge difference... I just wish I had a bigger tank now, more reserve would be great. Overall I love it though, much faster and I don't have to worry about the 15% duty cycle anymore. Posted via Mobile Device __________________ 2002 Saturn SL2, My D/D 2019 Ford Fusion SE, Ecoboost - Wife's D/D 1993 Camaro Z28, A4, CAI, Cat-Back Exhaust Project C10 (my 72' C10 w/96' LT1, 700R4, bagged F&R, 18's (for now), Short/Fleet) -- SOLD! Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=313644

08-07-2011, 03:22 PM	#21
magwakeenercew2jh RAT1968 '68 Cab/'71 Parts Join Date: Feb 2002 Location: Coarsegold, CA Posts: 2,375	Re: What did you do to your truck today! Unboxed all the Vintage Air stuff in the garage, put it in the car, and took it in smaller boxes to the shop. Put in the new air-battery box. Played around to try and fit the new radiator. It's gonna take some cutting on the core. That battery box fit was a b%&ch. Partly, I guess, foreign part jigs...And partly, squeezing it up into the spot that the new inner fender occupies. Repainted the spots that had paint on them that made me mad. Attached Images __________________ M17 Coarsegold, CA RAT's shiny now. But always a rat.

08-07-2011, 07:13 PM	#23
dukcaln Registered User Join Date: Jul 2011 Location: vacaville ca Posts: 1,304	Re: What did you do to your truck today! my first oil change since i bought the truck July 3rd... its the 3rd oil change i think since break in on new build... I went with wix filter and rotella 15-40 also re-routed plug wires __________________ 04 CHEVY LLY LS DURAMAX 4WD. MODS TO FOLLOW, EFI LIVE, BUILT TRANS, LBZ MP, LIFT PUMP *SOLD* 1972 chevy c10

08-07-2011, 09:31 PM	#24
profe56 Registered User Join Date: Nov 2008 Location: Chula Vista California Posts: 521	Re: What did you do to your truck today! I bought the oil to make oil change but I couldn't find the old cartridge oil filter, I think I should make the conversion to new type

08-08-2011, 12:23 AM	#25
RossRinSD Registered User Join Date: Feb 2010 Location: Fallbrook, CA Posts: 98	Re: What did you do to your truck today! I put the Honda Blocker on my truck today.

Register or Log In To remove these advertisements.