Delphi Connector part number - The 1947 - Present Chevrolet & GMC Truck Message Board Network

rfmaster · 06-28-2012, 04:50 PM

Hey guys.

I am trying to find a part number for a matching connector body for a fuel pressure sender ACDelco# 13500744. This sender is used on a number of GM trucks and SUV's - in my case 2007 Silverado with 5.3L engine. So far a visit to a dealer parts counter yielded nothing - parts guy tried several pig tail assemblies PTxxxx which did not match actual unit. This is a plug view of the sensor:

So far my research points toward Delphi GT 150 series of connectors using 4.5mm center-line with 1.5mm contact width. It is a 3-way female connector. Search of Delphi online catalog yielded no suitable candidates.

I could really use help from experienced parts guy! Thanks in advance.

//RF

cableguy0 · 06-28-2012, 06:35 PM

I dont know if your aware this exists but give it a shot. http://www.acdelco.com/parts/wire-an...r-connections/ . Its a listing of all pig tails for everything and supplies and ac-delco number. I learned about the site at a power steering seminar put on by ac-delco. BTW thats a male end connector.

rfmaster · 06-28-2012, 08:05 PM

CableGuy0

Thank you very much for the link - I think I found it!!!

CONNECTOR,SEN-FUEL PRESS
Part Number: PT2391 (19168035)
Product Notes:
Fuel Pressure Sensor Conn

PT2391

//RF

cableguy0 · 06-28-2012, 08:06 PM

Theres a ton of other info on that site too. Also has other manufacturers plugs and stuff too. I couldnt believe that info was available for free when the guy doing the seminar showed us all. Glad to help.

06-28-2012, 04:50 PM	#1
rfmaster Registered User Join Date: Oct 2003 Location: OC CA Posts: 1,374	Delphi Connector part number Hey guys. I am trying to find a part number for a matching connector body for a fuel pressure sender ACDelco# 13500744. This sender is used on a number of GM trucks and SUV's - in my case 2007 Silverado with 5.3L engine. So far a visit to a dealer parts counter yielded nothing - parts guy tried several pig tail assemblies PTxxxx which did not match actual unit. This is a plug view of the sensor: So far my research points toward Delphi GT 150 series of connectors using 4.5mm center-line with 1.5mm contact width. It is a 3-way female connector. Search of Delphi online catalog yielded no suitable candidates. I could really use help from experienced parts guy! Thanks in advance. //RF __________________ "The Beast" 1975 Chevrolet C20 longbed 350/700R4! with 3inch body lift Dual Flowmasters Super 40's! TBI retrofit completed (2007-07-29) New 383CID (+030) 08-304-8 9.5:1CR x36,005 (2012-12-17)

06-28-2012, 06:35 PM	#2
cableguy0 Senior Member Join Date: Apr 2000 Location: Delta,Pa Posts: 14,950	Re: Delphi Connector part number I dont know if your aware this exists but give it a shot. http://www.acdelco.com/parts/wire-an...r-connections/ . Its a listing of all pig tails for everything and supplies and ac-delco number. I learned about the site at a power steering seminar put on by ac-delco. BTW thats a male end connector. __________________ Owner of North Point Car Care in Dundalk Md. We specialize in custom exhaust on both modern and classic vehicles. We are a full service auto shop from classics to modern vehicles. Feel free to contact me with questions. I will give a 10% discount to any board member.

06-28-2012, 08:05 PM	#3
rfmaster Registered User Join Date: Oct 2003 Location: OC CA Posts: 1,374	Re: Delphi Connector part number CableGuy0 Thank you very much for the link - I think I found it!!! CONNECTOR,SEN-FUEL PRESS Part Number: PT2391 (19168035) Product Notes: Fuel Pressure Sensor Conn PT2391 //RF __________________ "The Beast" 1975 Chevrolet C20 longbed 350/700R4! with 3inch body lift Dual Flowmasters Super 40's! TBI retrofit completed (2007-07-29) New 383CID (+030) 08-304-8 9.5:1CR x36,005 (2012-12-17)

06-28-2012, 08:06 PM	#4
cableguy0 Senior Member Join Date: Apr 2000 Location: Delta,Pa Posts: 14,950	Re: Delphi Connector part number Theres a ton of other info on that site too. Also has other manufacturers plugs and stuff too. I couldnt believe that info was available for free when the guy doing the seminar showed us all. Glad to help. __________________ Owner of North Point Car Care in Dundalk Md. We specialize in custom exhaust on both modern and classic vehicles. We are a full service auto shop from classics to modern vehicles. Feel free to contact me with questions. I will give a 10% discount to any board member.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.