The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1960 - 1966 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 07-19-2021, 06:45 PM   #1
CousinTone
Registered User
 
Join Date: Jul 2015
Location: Placentia, CA
Posts: 344
Need some Rocker dimensions / pics if anyone has them

I bought a true project 1964 C20 the PO installed the left inner floor and (inner) rocker. I’m not sure it’s positioned correctly and would appreciate a picture and measurement of what the distance is between the ridge of the outer rocker relative to the inner rocker & floor. I’m not 100% sure they have it installed correctly and would appreciate a second or third opinion. Let me know if you need more details. Thanks in advance for all your guidance.

My concern is when I install the weatherstripping that there’s the proper alignment for the door when it’s closed. Any advice is appreciated. TV

Last edited by CousinTone; 07-19-2021 at 09:04 PM.
CousinTone is offline   Reply With Quote
Old 07-19-2021, 09:45 PM   #2
SkinnyG
Registered User
 
SkinnyG's Avatar
 
Join Date: Feb 2012
Location: Beautiful BC, Canada, eh?!
Posts: 2,161
Re: Need some Rocker dimensions / pics if anyone has them

I'm not exactly sure what it is you want measured to and from.

My inner rocker position was pretty much dictated by the bottom of the door pillars. Neither my left and right placements/positions are consistent side-to-side, and all my parts were from the same supplier.

What truly matters, is the fitment of the outer rocker to the doors.
__________________
1961 Apache: "Grabber Orange" Shortboxed, pancake, step-notch, air-ride, boosted-LS
1977 Silverado: Shortboxed & dropped, potato-potato
V8 Pontiac Firefly (Chevy Sprint): The ultimate engine swap: 5.7L in a 1.0L bag
Lotus Super 7 Replica: Scratch-built street-legal rollerskate
SkinnyG is offline   Reply With Quote
Old 07-19-2021, 11:48 PM   #3
CousinTone
Registered User
 
Join Date: Jul 2015
Location: Placentia, CA
Posts: 344
Re: Need some Rocker dimensions / pics if anyone has them

Quote:
Originally Posted by SkinnyG View Post
I'm not exactly sure what it is you want measured to and from.

My inner rocker position was pretty much dictated by the bottom of the door pillars. Neither my left and right placements/positions are consistent side-to-side, and all my parts were from the same supplier.

What truly matters, is the fitment of the outer rocker to the doors.
Being new to fab, I’ll post a pic of how the outer lines up with pilars and we’ll see if it’s close. So long as it aligns with the weather strip line, it should be ok from what I take from your advice. Thank you!!
CousinTone is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 10:05 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com