The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1960 - 1966 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 04-12-2015, 03:18 PM   #1
bigB98
Registered User
 
Join Date: Apr 2015
Location: Port Orchard, Washington
Posts: 27
1966 Chevy C20 lowering

Hey guys I plan on lowering my '66 C20 here shortly but I can't decide how low to go. I want enough clearance that I won't scrape over bumps and whatnot but I'm not a fan of its factory height. I was thinking a 6" rear cool drop and 4" front coil drop. Anyone have some pictures they can put up and help me out? Thank You.
bigB98 is offline   Reply With Quote
Old 04-12-2015, 03:27 PM   #2
jadedbird
Registered User
 
jadedbird's Avatar
 
Join Date: Apr 2015
Location: So Indiana
Posts: 139
Re: 1966 Chevy C20 lowering

Check out Steinway64 on instagraM.
jadedbird is offline   Reply With Quote
Old 04-12-2015, 03:43 PM   #3
chevy_mike
Never Ending Projects
 
chevy_mike's Avatar
 
Join Date: Jul 2006
Location: San Diego, CA
Posts: 3,836
Re: 1966 Chevy C20 lowering

I don't think anyone makes a 4" drop spring. With a 3" one, there is almost no suspension travel. If you want 4" drop up front, do a dropped spindle and 2" dropped spring.
__________________
.
1965 C10 Panel, Tiki Express http://www.67-72chevytrucks.com/vboa...d.php?t=506580 SOLD
1968 Chevy C10, Long, Fleetside, Hot Rod Hauler http://67-72chevytrucks.com/vboard/s...d.php?t=313233 SOLD
1965 Chevy C10, Long, Fleetside, Hot Rod C10 http://67-72chevytrucks.com/vboard/s...d.php?t=415702 SOLD


We were given two ears and one mouth for a reason... listen twice as much and speak half as often...
chevy_mike is offline   Reply With Quote
Old 04-12-2015, 08:32 PM   #4
Mathew21
Senior Member
 
Mathew21's Avatar
 
Join Date: May 2010
Location: Clinton township, MI
Posts: 1,190
Re: 1966 Chevy C20 lowering

My 66" C20 has 4" lowering springs in the back. Front has 2.5" drop spindles and 2" lowering springs.

__________________
It only has original paint once
Mathew21 is offline   Reply With Quote
Old 04-12-2015, 10:43 PM   #5
chevyrestoguy
Registered User
 
chevyrestoguy's Avatar
 
Join Date: Mar 2005
Location: apple valley, ca
Posts: 2,670
Re: 1966 Chevy C20 lowering

Check out my '64 thread below. I started with a '64 C20.
__________________
Check out my latest endeavor:
https://roundsixpod.com

My build threads:
'55 Chevy: http://67-72chevytrucks.com/vboard/s...d.php?t=247512

'64 C-20: http://67-72chevytrucks.com/vboard/s...d.php?t=446527
chevyrestoguy is offline   Reply With Quote
Old 04-16-2015, 03:18 PM   #6
Rust-O-Matic
Registered User
 
Rust-O-Matic's Avatar
 
Join Date: Apr 2015
Location: Gallatin, MO
Posts: 295
Re: 1966 Chevy C20 lowering

I put 5" 1/2 ton coils in the rear of my '66 C20, and 3" 1/2 ton coils in the front. With the original bump stops removed there's still a reasonable amount of suspension travel. Anything shorter than 3" springs on the front will not stay seated in the control arm pockets if you jack it up under the frame, and let the arms hang down.

My first attempt was to cut two coils off the original front springs (4-ish inches) and it was way too low. The springs didn't stay seated and there was about an inch between the tire tread and the inner fenders. Hence, the half ton springs.
Rust-O-Matic is offline   Reply With Quote
Old 04-16-2015, 03:58 PM   #7
Cooper197
Registered User
 
Cooper197's Avatar
 
Join Date: Jul 2014
Location: Eugene, Oregon
Posts: 199
Re: 1966 Chevy C20 lowering

I did 2.5" drop spindles and disk brakes up front and 3" drop springs in the back. I also did 20" wheels in the back and 18" in the front with tire sizes that do make for almost a 2" difference.
Mine is noticeably lowered and raked, but I generally don't have to worry about bumps and such on the road or uneven driveways. The only time I've ever had issues was out at my dad's farm on a very steep, rocky driveway. Bumped the lower control arms off a few rocks there.



Cooper197 is offline   Reply With Quote
Old 04-16-2015, 04:04 PM   #8
endlessearth
Registered User
 
endlessearth's Avatar
 
Join Date: May 2013
Location: Scottsdale, AZ
Posts: 373
Re: 1966 Chevy C20 lowering

[IMG][/IMG]

Like the beautiful green truck above my 1964 C20 has 4" lowering springs in the back. Front has 2.5" drop spindles and 2" lowering springs. I also have disc brakes up-front now which are a massive improvement. I also went with smaller tires because my previous front tires were occasionally making contact with inner fender after it was dropped.
endlessearth is offline   Reply With Quote
Old 04-16-2015, 04:28 PM   #9
Rust-O-Matic
Registered User
 
Rust-O-Matic's Avatar
 
Join Date: Apr 2015
Location: Gallatin, MO
Posts: 295
Re: 1966 Chevy C20 lowering

^Those are some slick looking machines! It's probably worth mentioning that most of these appear to have been converted to 1/2 ton running gear, so axle clearance and parts availability may be a little more limited if bigB98 is still running the original 3/4 ton stuff.
Rust-O-Matic is offline   Reply With Quote
Old 04-16-2015, 05:11 PM   #10
Cooper197
Registered User
 
Cooper197's Avatar
 
Join Date: Jul 2014
Location: Eugene, Oregon
Posts: 199
Re: 1966 Chevy C20 lowering

Quote:
Originally Posted by Rust-O-Matic View Post
^Those are some slick looking machines! It's probably worth mentioning that most of these appear to have been converted to 1/2 ton running gear, so axle clearance and parts availability may be a little more limited if bigB98 is still running the original 3/4 ton stuff.
That's a good point. Mine had a half ton, 5 lug rear end put in quite some time ago. I had somebody do the front end (spindles and disk brakes) and I do not remember if he ended up just changing out the ball joints or if he changed out the whole front end. Either way, I know some modifications had to be made to make it happen.
Cooper197 is offline   Reply With Quote
Old 04-16-2015, 06:16 PM   #11
Mathew21
Senior Member
 
Mathew21's Avatar
 
Join Date: May 2010
Location: Clinton township, MI
Posts: 1,190
Re: 1966 Chevy C20 lowering

Quote:
Originally Posted by Rust-O-Matic View Post
^Those are some slick looking machines! It's probably worth mentioning that most of these appear to have been converted to 1/2 ton running gear, so axle clearance and parts availability may be a little more limited if bigB98 is still running the original 3/4 ton stuff.
I should've mentioned my C20 now has a 1/2 ton suspension. I used a 5 lug rear axle out of a early 80's Chevy van. I swapped the front crossmember from a 1991 1/2 Suburban.

endlessearth I love the look of your truck. I would like to see a better picture of your door logo. I want to get my doors done this year.
__________________
It only has original paint once
Mathew21 is offline   Reply With Quote
Old 04-16-2015, 09:40 PM   #12
rickywideglide
Registered User
 
rickywideglide's Avatar
 
Join Date: Jun 2013
Location: mechanicsville,md
Posts: 360
Re: 1966 Chevy C20 lowering

3 inch in front ,5 inch in rear still have 3/4 front crossmember switched to half ton rearName:  017.jpg
Views: 4624
Size:  59.9 KB
rickywideglide is offline   Reply With Quote
Old 04-17-2015, 04:44 AM   #13
bigB98
Registered User
 
Join Date: Apr 2015
Location: Port Orchard, Washington
Posts: 27
Re: 1966 Chevy C20 lowering

I do like the look of the lowered take on that. I'll try to get a pic of mine up tomorrow morning.
bigB98 is offline   Reply With Quote
Old 04-17-2015, 04:48 AM   #14
bigB98
Registered User
 
Join Date: Apr 2015
Location: Port Orchard, Washington
Posts: 27
Re: 1966 Chevy C20 lowering

I got this one for now
Attached Images
 
bigB98 is offline   Reply With Quote
Old 04-17-2015, 05:49 PM   #15
bigB98
Registered User
 
Join Date: Apr 2015
Location: Port Orchard, Washington
Posts: 27
Re: 1966 Chevy C20 lowering

ran my block casting and engine code. It's a 350 from 1969 and not a 327 as I was told when I get her.
bigB98 is offline   Reply With Quote
Old 02-03-2016, 02:48 PM   #16
Bradfather
Registered User
 
Join Date: Feb 2016
Location: East Troy, WI
Posts: 23
Re: 1966 Chevy C20 lowering

Quote:
Originally Posted by Mathew21 View Post
My 66" C20 has 4" lowering springs in the back. Front has 2.5" drop spindles and 2" lowering springs.

Hello, May I ask, What size tires and rims you have on this C20? Are they the biggest you can go or is there room for more (Height and width?) Thank you.
Bradfather is offline   Reply With Quote
Old 02-03-2016, 09:31 PM   #17
Mathew21
Senior Member
 
Mathew21's Avatar
 
Join Date: May 2010
Location: Clinton township, MI
Posts: 1,190
Re: 1966 Chevy C20 lowering

Quote:
Originally Posted by Bradfather View Post
Hello, May I ask, What size tires and rims you have on this C20? Are they the biggest you can go or is there room for more (Height and width?) Thank you.

My truck is an hour away in storage for the winter. But I'm almost positive my tires are 225/65/16. I could go a little wider in the back right now. I plan on going with a different offset for the back so I can fit a wider tire in the back. Offhand I'm not sure about the front.
__________________
It only has original paint once

Last edited by Mathew21; 02-06-2016 at 09:05 AM.
Mathew21 is offline   Reply With Quote
Old 02-03-2016, 09:54 PM   #18
Bradfather
Registered User
 
Join Date: Feb 2016
Location: East Troy, WI
Posts: 23
Re: 1966 Chevy C20 lowering

Quote:
Originally Posted by Cooper197 View Post
I did 2.5" drop spindles and disk brakes up front and 3" drop springs in the back. I also did 20" wheels in the back and 18" in the front with tire sizes that do make for almost a 2" difference.
Mine is noticeably lowered and raked, but I generally don't have to worry about bumps and such on the road or uneven driveways. The only time I've ever had issues was out at my dad's farm on a very steep, rocky driveway. Bumped the lower control arms off a few rocks there.



Hello, May I ask, What size tires and rims you have on this C20? Are they the biggest you can go or is there room for more (Height and width?) Thank you.
Bradfather is offline   Reply With Quote
Old 02-03-2016, 10:30 PM   #19
Hollow65
Registered User
 
Hollow65's Avatar
 
Join Date: Feb 2015
Location: San Diego, CA
Posts: 409
Re: 1966 Chevy C20 lowering

Name:  image.jpg
Views: 3947
Size:  91.1 KB
4-6 drop from ECE
255/55/17 front
265/55/18 rear
__________________
At my worst I'm at my best
Hollow65 is offline   Reply With Quote
Old 02-03-2016, 10:34 PM   #20
Hollow65
Registered User
 
Hollow65's Avatar
 
Join Date: Feb 2015
Location: San Diego, CA
Posts: 409
Re: 1966 Chevy C20 lowering

Name:  image.jpg
Views: 4456
Size:  45.0 KB
4-6 drop from ECE
255/55/17 front
285/45/18 rear
__________________
At my worst I'm at my best
Hollow65 is offline   Reply With Quote
Old 02-03-2016, 11:18 PM   #21
Cooper197
Registered User
 
Cooper197's Avatar
 
Join Date: Jul 2014
Location: Eugene, Oregon
Posts: 199
Re: 1966 Chevy C20 lowering

Quote:
Originally Posted by Bradfather View Post
Hello, May I ask, What size tires and rims you have on this C20? Are they the biggest you can go or is there room for more (Height and width?) Thank you.
I'm running 20x8.5 -6mm in the back and 18x8 +10mm in the front.
The rear is a 255/45R20 and front is 235/50R18.

The back is close on width for the stock wheel tubs, and I wouldn't want much more height with the 3" drop springs.

For reference, the rear wells sit at about where the rim meets the tire, tucking the top of the tire in. On the front, the whole tire clears the top of the well.

As far as the front goes, I could have gone with the same size as the rear no problem, sometimes I wish I did from a looks standpoint, but I wouldn't get new wheels and tires just for that reason.

So, as far as could you go bigger/wider. Probably, but at some point it would require some work on the tubs and such. However, if just looking for a cruiser and not something to take to the strip, you should be able to get enough rubber with a similar setup.
Cooper197 is offline   Reply With Quote
Old 02-04-2016, 12:30 AM   #22
Bradfather
Registered User
 
Join Date: Feb 2016
Location: East Troy, WI
Posts: 23
Re: 1966 Chevy C20 lowering

Quote:
Originally Posted by Cooper197 View Post
I'm running 20x8.5 -6mm in the back and 18x8 +10mm in the front.
The rear is a 255/45R20 and front is 235/50R18.

The back is close on width for the stock wheel tubs, and I wouldn't want much more height with the 3" drop springs.

For reference, the rear wells sit at about where the rim meets the tire, tucking the top of the tire in. On the front, the whole tire clears the top of the well.

As far as the front goes, I could have gone with the same size as the rear no problem, sometimes I wish I did from a looks standpoint, but I wouldn't get new wheels and tires just for that reason.

So, as far as could you go bigger/wider. Probably, but at some point it would require some work on the tubs and such. However, if just looking for a cruiser and not something to take to the strip, you should be able to get enough rubber with a similar setup.
Thank you. Do you have the stock axle in your truck or did you go with a Ford 9" or another axle?
Bradfather is offline   Reply With Quote
Old 11-12-2021, 09:35 PM   #23
LostMy65
But Found Her 25yrs Later!
 
LostMy65's Avatar
 
Join Date: Oct 2010
Location: Oregon City, Oregon
Posts: 10,457
Re: 1966 Chevy C20 lowering

I know this is an old thread, but it appears most posted here are either c10's or have been converted to c10's. I personally would like to see lowered 8-luggers.
__________________
I lost my 65 - Found it 25 years later:
http://67-72chevytrucks.com/vboard/s...d.php?t=426650

66 C20 Service Truck:
http://67-72chevytrucks.com/vboard/s...d.php?t=428035
LostMy65 is offline   Reply With Quote
Old 11-13-2021, 12:08 AM   #24
Rust-O-Matic
Registered User
 
Rust-O-Matic's Avatar
 
Join Date: Apr 2015
Location: Gallatin, MO
Posts: 295
Re: 1966 Chevy C20 lowering

Here's my '66. Original C20 suspension in the front (have '77 C20 front to swap eventually), '96 14 bolt and tubular trailing arms in the back. 3"/5" half ton coils and homemade shock relocators/mounts. 235/70/16 tires on stock square body rims.
Attached Images
 
Rust-O-Matic is offline   Reply With Quote
Old 11-13-2021, 12:34 AM   #25
LostMy65
But Found Her 25yrs Later!
 
LostMy65's Avatar
 
Join Date: Oct 2010
Location: Oregon City, Oregon
Posts: 10,457
Re: 1966 Chevy C20 lowering

Quote:
Originally Posted by Rust-O-Matic View Post
Here's my '66. Original C20 suspension in the front (have '77 C20 front to swap eventually), '96 14 bolt and tubular trailing arms in the back. 3"/5" half ton coils and homemade shock relocators/mounts. 235/70/16 tires on stock square body rims.
Great! My 66 has the newer 14-Bolt and front discs off of a 79.
__________________
I lost my 65 - Found it 25 years later:
http://67-72chevytrucks.com/vboard/s...d.php?t=426650

66 C20 Service Truck:
http://67-72chevytrucks.com/vboard/s...d.php?t=428035
LostMy65 is offline   Reply With Quote
Reply

Bookmarks

Tags
1966, c10, c20

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 10:40 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com