The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1947 - 1959 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 03-25-2023, 01:00 PM   #1
73kay
Registered User
 
Join Date: Jul 2014
Location: Indy, IN
Posts: 631
s10 ZR2 axle - what wheels/tires are you guys using?

Hey guys,

I have a 53 and scored a ZR2 axle with drum brakes 3.73 post etc. It's 63 inches wms. I am piecing together threads to find out what tire/wheel specs I need. Today I have some smoothies 15x7 with 3.25 bs and rubbing. The rear suspension is TCI leaf spring kit that is 4in drop + 3in drop blocks. I am rubbing as it stands. What wheels/tires are you guys using with a ZR2 axle and have a lot of drop? I am looking to stay 15in wheels.

My thought so far is that I need new wheels with at least 4 or more backspacing and some positive offset. Otherwise I will have to start trimming the fender lip and/or switch to a narrower tire like a 225x75.15 (8.85 in width vs 9.25 of the 235x75x15).

Hope I am missing something simple here, below is some nerd math if that helps.




bed box is 50in wide
backspacing for wheels needed is 4 inches (4 x 2 for both sides = 8 inches)
ZR2 is 63
63-8 = 55 inches (2.5 in of the axle sticking out each side of the box)
need clearance to be ~1 in on both sides of the fender, so need to bring the wheels in towards the bed another 1in at least?
__________________
Andrew

1953 3100 235 T5
1985 K5 Blazer 350 700R4 208
73kay is offline   Reply With Quote
Old 03-25-2023, 01:02 PM   #2
73kay
Registered User
 
Join Date: Jul 2014
Location: Indy, IN
Posts: 631
Re: s10 ZR2 axle - what wheels/tires are you guys using?

Some pix
Attached Images
   
__________________
Andrew

1953 3100 235 T5
1985 K5 Blazer 350 700R4 208
73kay is offline   Reply With Quote
Old 03-25-2023, 05:09 PM   #3
whitedog76
Registered User
 
Join Date: Jan 2014
Location: Peoria, IL
Posts: 1,450
Re: s10 ZR2 axle - what wheels/tires are you guys using?

I have a 3/4 ton truck, but the rearend in them is 62-63" wide. I had some 4.25" backspace rims with 245 tires on them with plenty of clearance to go around. I also had a 4.6 backspace rim at one point that fit good also. Of course, the 3/4 ton sits a little higher than the 1/2 tons which makes a difference.
whitedog76 is offline   Reply With Quote
Old 03-26-2023, 08:41 PM   #4
mr48chev
Registered User
 
mr48chev's Avatar
 
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,246
Re: s10 ZR2 axle - what wheels/tires are you guys using?

That is the trouble with a rear axle over about 61.25 is that you can't get reverse wheels to fit inside the fenders. 60 or less and you have to watch the back spacing real close.

This go around it is a decision on if you are willing to give up the perfect wheels for that truck, swap rear ends for one a couple of inches narrower. Or change the rear fenders to wider fenders. Hogfarm had a pair of as perfect as you will find wide fiberglass rear fenders but may have sold them already.
__________________
Founding member of the too many projects, too little time and money club.

My ongoing truck projects:
48 Chev 3100 that will run a 292 Six.
71 GMC 2500 that is getting a Cad 500 transplant.
77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.
mr48chev is offline   Reply With Quote
Old 03-26-2023, 09:29 PM   #5
73kay
Registered User
 
Join Date: Jul 2014
Location: Indy, IN
Posts: 631
Re: s10 ZR2 axle - what wheels/tires are you guys using?

Thanks for the responses. I originally wanted a 4wd (not zr2) but didn’t have my tape measure with me when I got it. Only $150 and maybe it will still work. Now that I keep lowering it my clearance is a lot tighter.
__________________
Andrew

1953 3100 235 T5
1985 K5 Blazer 350 700R4 208
73kay is offline   Reply With Quote
Old 03-27-2023, 08:40 PM   #6
dsraven
Registered User
 
Join Date: Nov 2010
Location: calgary alberta
Posts: 7,774
Re: s10 ZR2 axle - what wheels/tires are you guys using?

a 4x4 axle is waay esier to find than a zr2 axle. maybe you can swap somebody. or find a 4x4 axle at the pick n pull
dsraven is offline   Reply With Quote
Old 03-27-2023, 10:58 PM   #7
whitedog76
Registered User
 
Join Date: Jan 2014
Location: Peoria, IL
Posts: 1,450
Re: s10 ZR2 axle - what wheels/tires are you guys using?

Isn't the Zr2 an 8.5 30 spline axle, vs. 7.5 in the standard S10? I would stick with the Zr2.
whitedog76 is offline   Reply With Quote
Old 03-28-2023, 12:06 AM   #8
dsraven
Registered User
 
Join Date: Nov 2010
Location: calgary alberta
Posts: 7,774
Re: s10 ZR2 axle - what wheels/tires are you guys using?

whaddya got for power and trans?
you could always try a ford 8.8 if youre running bigger power on a budget. explorers have 31 spline axles, discs, a decent park brake and are comparable to the GM 12 bolt for strength. explorers have an offset center but if the dimensions are right you can shorten the long side to be the same as the short side and use another short axle. more work though
try to get the track width you want so you can get the wheels/look you want with a wheel that isn't gonna be a special 1 off.
dsraven is offline   Reply With Quote
Old 03-28-2023, 12:14 AM   #9
dsraven
Registered User
 
Join Date: Nov 2010
Location: calgary alberta
Posts: 7,774
Re: s10 ZR2 axle - what wheels/tires are you guys using?

it's like building a house. get the foundation right for what the end result is gonna be, then build on top of the foundation. otherwise you end up changing other stuff to accomodate. sometimes that ends up costing more time and money.
dsraven is offline   Reply With Quote
Old 03-28-2023, 11:30 AM   #10
hogfarm
Senior Member
 
Join Date: Jan 2016
Location: Appleton Washington
Posts: 579
Re: s10 ZR2 axle - what wheels/tires are you guys using?

Quote:
Originally Posted by mr48chev View Post
That is the trouble with a rear axle over about 61.25 is that you can't get reverse wheels to fit inside the fenders. 60 or less and you have to watch the back spacing real close.

This go around it is a decision on if you are willing to give up the perfect wheels for that truck, swap rear ends for one a couple of inches narrower. Or change the rear fenders to wider fenders. Hogfarm had a pair of as perfect as you will find wide fiberglass rear fenders but may have sold them already.
The fenders I had sold quick to a local guy. I had the wheels I wanted to use, it took me hours with a tape measure, trying to fit the wheels under the stock fenders. I will finish the tubs today, then fenders and tubs off to the painter
hogfarm is offline   Reply With Quote
Old 03-28-2023, 12:20 PM   #11
dsraven
Registered User
 
Join Date: Nov 2010
Location: calgary alberta
Posts: 7,774
Re: s10 ZR2 axle - what wheels/tires are you guys using?

hogfarm makes a great point. if you ever have to swap a tire on the side of the road you may need a bunch of blocking so you can jack the truck up off the frame enough to get the wheel out. especially if the axle is kinda wide for the truck.
it's your truck and your wallet so do whats best for you.
dsraven is offline   Reply With Quote
Old 04-01-2023, 01:33 PM   #12
73kay
Registered User
 
Join Date: Jul 2014
Location: Indy, IN
Posts: 631
I think I got a solution. Found some 15x7s with 4in backspacing and also went with a slightly narrower tire (225x70x15) and I got better clearance. I can always roll the lip a bit but guessing I have 1/2 in of clearance or so.

One of the benefits is the new wheels mount to the s10 axle bolt pattern (5x4.75) as well as the ford/dodge 5x4.5. Earlier I was open to have two separate wheels.

As for powertrain, I have a rebuilt 235 and a t5. Nothing killer but I want suspension and axles to be done and ready if I ever decide to get a v8. I’ll post some pix after I get them installed.
Posted via Mobile Device
Attached Images
 
73kay is offline   Reply With Quote
Old 04-17-2023, 07:11 AM   #13
73kay
Registered User
 
Join Date: Jul 2014
Location: Indy, IN
Posts: 631
Re: s10 ZR2 axle - what wheels/tires are you guys using?

Just want to follow up in case this is useful for future visitors.

I ended up getting 15x7 w/ 4in backspacing and it worked for me. I did end up using 225/70/15s ~8.75 inch tire width and had clearance. I used the baseball bat fender lip roll to add some more breathing space. I wasn't too set on thick wheels or tubbing, pretty happy with the results. Thanks for all the help.
Attached Images
   
__________________
Andrew

1953 3100 235 T5
1985 K5 Blazer 350 700R4 208

Last edited by Rickysnickers; 04-17-2023 at 09:23 AM.
73kay is offline   Reply With Quote
Old 04-17-2023, 06:24 PM   #14
joedoh
Senior Member
 
joedoh's Avatar
 
Join Date: May 2007
Location: Doodah Kansas
Posts: 7,746
Re: s10 ZR2 axle - what wheels/tires are you guys using?

thats a good fit!
__________________
the mass of men live lives of quiet desperation


if there is a problem, I can have it.

new project WAYNE http://67-72chevytrucks.com/vboard/s...d.php?t=844393
joedoh is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:47 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com