Project "Poison Ivy" 54 GMC - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

c10addict · 11-02-2009, 12:11 PM

I will probably have to move it but I am hoping not... I am running the 2wd rear with spacers...

**ChiefRocka** · 11-18-2009, 11:53 PM

Just had to come over here really quick and say....

SICK BRO!!

c10addict · 11-19-2009, 07:21 AM

Quote:

Originally Posted by ChiefRocka

Just had to come over here really quick and say....

SICK BRO!!

You allowed over here Cheif???

Thanks my man!

kdhs10 · 11-19-2009, 10:46 AM

Quote:

Originally Posted by BlueJeep

Is the 1 piece driveshaft stock? Most I've seen have had the 2 piece...

Extended cab S-10's have two piece driveshafts, the regular cabs have one piece units.

**ChiefRocka** · 11-21-2009, 10:10 AM

Quote:

Originally Posted by c10addict

You allowed over here Cheif???

Thanks my man!

Anytime man....

63 & 64 Bowties · 12-16-2009, 04:33 PM

any more progress?
I saw you mention in another thread that you were gonna use a harness from fuel injection specialities. You mind telling how much their harness are? I assume you're getting trans wiring too?
thanks

c10addict · 12-16-2009, 04:58 PM

The engine and tranny harness come together... I have around a grand wrapped up in the harness and reprogramming the computer... I have made a little more progress... Exhaust is run, fuel tank is back in, air tank mounted and lines run, tranny cooler mounted and connected... I just have to get the truck and chassis to the hot rod shop so we can swap the tin... I will post some pics later..

63 & 64 Bowties · 01-08-2010, 02:20 PM

I got something for ya.... I was browsing WWII bomber art, and found this....
http://www.ww2planenoseart.com/Image...%20Ivy_jpg.htm

1950 GMC · 01-08-2010, 03:30 PM

Now those must of been the days.... I wish we had that kind of art on our planes today, but of course someone would complain and we would have to take it off.... Thanks for sharing.

c10addict · 01-08-2010, 03:35 PM

Thanks thats awesome!!

99 to Life · 01-22-2010, 01:45 AM

c10 addict, hey been following your thread. I am new to the site and just posted my build. I live in Pittsburgh and thought that is dope to see someone else from here on here. I really like your work.

c10addict · 01-22-2010, 08:37 AM

Quote:

Originally Posted by 99 to Life

c10 addict, hey been following your thread. I am new to the site and just posted my build. I live in Pittsburgh and thought that is dope to see someone else from here on here. I really like your work.

Thanks Bro.... If you are coming to the World of Wheels car show this weekend swing by and say Hi.... My name is Fritz.. I will be a the RPM truck and trailer... We took 7 cars down... My white 64 is there as well in the builder of the year display... Take care!

LOW DOUGH · 01-25-2010, 06:01 PM

Look'n good c10! Can't wait to see it all together.

stepside83 · 01-26-2010, 11:47 PM

this truck looks awesome man and i like the 60's era truck you have iv seen it at the church car show that thing is awesome as well, dan told me how youtook a brand new license plate and weathered it to make it match the truck now thats detail nice trucks and nice work bro zac

71'tahoe · 03-30-2010, 08:17 PM

Updates?!

c10addict · 03-30-2010, 08:48 PM

Sad to say but NO updates.... The shop is SUPER busy and I have had no time to work on my own junk.... We built the Goodguys giveaway car "Boss Snake" but only really had 3 months to build it... Now that its gone we are getting caught up and I will get back on this.... I will be driving it this summer!! Here is a link to our website so you can check out some of our projects.. www.rpm-hotrods.com

packrat42 · 06-11-2010, 04:18 PM

Any more updates...

cable666guy · 01-08-2011, 03:52 PM

Great project...btw, just checked out RPMs website, you guys do awesome work!!
You're white p/u is one of my favorites!!

c10addict · 03-08-2011, 09:04 AM

Unfortunately this project has been laying dead! The shop is super busy (good thing) and we are traveling all over the country going to shows.. I got rid of the 64 so I need a driver for the summer.. I am itching to get rolling on it again! Stay tuned..

daverod · 03-11-2011, 12:57 AM

Love it.

daverod · 03-11-2011, 10:45 AM

Quote:

Originally Posted by c10addict

The engine and tranny harness come together... I have around a grand wrapped up in the harness and reprogramming the computer... I have made a little more progress... Exhaust is run, fuel tank is back in, air tank mounted and lines run, tranny cooler mounted and connected... I just have to get the truck and chassis to the hot rod shop so we can swap the tin... I will post some pics later..

Could go into alittle more detail what needs to be changed some far as the computer stuff.

Thanks to you I now get to cut up my frame.

rodstored-72 · 03-14-2011, 03:19 PM

Quote:

Originally Posted by c10addict

Unfortunately this project has been laying dead! The shop is super busy (good thing) and we are traveling all over the country going to shows.. I got rid of the 64 so I need a driver for the summer.. I am itching to get rolling on it again! Stay tuned..

so did you guys make a recent trip to phoenix??????

i looked but don't remember seeing a banner/booth. if not we missed ya.

it was a little low this year on vendors... i think.

great stuff that comes out of the shop! you guys are very talented!

c10addict · 03-14-2011, 03:23 PM

Quote:

Originally Posted by rodstored-72

so did you guys make a recent trip to phoenix??????

i looked but don't remember seeing a banner/booth. if not we missed ya.

it was a little low this year on vendors... i think.

great stuff that comes out of the shop! you guys are very talented!

We didn't... We were at a indoor show in Toronto Canada !! I would have rather been in AZ!!!

I appreciate the compliments! We have some really cool stuff in the mix right now!! There will be a lot of fresh metal rolling out of here this summer!

c10addict · 08-20-2011, 10:11 AM

Time to wake this thread up... I pulled the truck out of the garage and drove it to the shop today... Time to make things happen.. I'm excited to get it done.. I would like to have it done for the Ocean City show in the beginning of October.. Pics to follow as I start to get the tin swapped over..

63 & 64 Bowties · 08-20-2011, 10:33 AM

Quote:

Originally Posted by c10addict

Time to wake this thread up.

Cool. Don't hit the snooze button now

11-02-2009, 12:11 PM	#51
c10addict Registered User Join Date: Aug 2007 Location: pittsburgh pa Posts: 1,970	Re: Project "Poison Ivy" 54 GMC I will probably have to move it but I am hoping not... I am running the 2wd rear with spacers... __________________ 68 C10 Shorty TPI,Bagged, and all the good stuff. Classic trucks feature June 06, On the cover of Jegs Christmas Catalog 08 67 C10 Shorty Shop truck project Bagged and Z'd under destruction and getting nowhere fast. 64 C10 Shop Truck/Daily driver, Bagged, Dropmember, SOLD!!!! Gone but not forgotten.. 54 GMC under the knife getting a S10 chassis swap and bagged. See my build thread... 07 GMC Sierra 5/7 drop, 22's and 24's Air ride on my mind.. http://67-72chevytrucks.com/vboard/s...d.php?t=339340 See pics of my trucks in my profile

11-18-2009, 11:53 PM	#52
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,147	Re: Project "Poison Ivy" 54 GMC Just had to come over here really quick and say....SICK BRO!! __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!"

12-16-2009, 04:33 PM	#56
63 & 64 Bowties and a few others Join Date: Jun 2007 Location: Blue Ridge Mountains of VA Posts: 5,638	Re: Project "Poison Ivy" 54 GMC any more progress? I saw you mention in another thread that you were gonna use a harness from fuel injection specialities. You mind telling how much their harness are? I assume you're getting trans wiring too? thanks __________________ Bill US Army Vet -193rd Infantry BlueRidgeMuscleCars.com “The greatness of a nation and its moral progress can be judged by the way its animals are treated” Gandhi

12-16-2009, 04:58 PM	#57
c10addict Registered User Join Date: Aug 2007 Location: pittsburgh pa Posts: 1,970	Re: Project "Poison Ivy" 54 GMC The engine and tranny harness come together... I have around a grand wrapped up in the harness and reprogramming the computer... I have made a little more progress... Exhaust is run, fuel tank is back in, air tank mounted and lines run, tranny cooler mounted and connected... I just have to get the truck and chassis to the hot rod shop so we can swap the tin... I will post some pics later.. __________________ 68 C10 Shorty TPI,Bagged, and all the good stuff. Classic trucks feature June 06, On the cover of Jegs Christmas Catalog 08 67 C10 Shorty Shop truck project Bagged and Z'd under destruction and getting nowhere fast. 64 C10 Shop Truck/Daily driver, Bagged, Dropmember, SOLD!!!! Gone but not forgotten.. 54 GMC under the knife getting a S10 chassis swap and bagged. See my build thread... 07 GMC Sierra 5/7 drop, 22's and 24's Air ride on my mind.. http://67-72chevytrucks.com/vboard/s...d.php?t=339340 See pics of my trucks in my profile

01-08-2010, 02:20 PM	#58
63 & 64 Bowties and a few others Join Date: Jun 2007 Location: Blue Ridge Mountains of VA Posts: 5,638	Re: Project "Poison Ivy" 54 GMC I got something for ya.... I was browsing WWII bomber art, and found this.... http://www.ww2planenoseart.com/Image...%20Ivy_jpg.htm __________________ Bill US Army Vet -193rd Infantry BlueRidgeMuscleCars.com “The greatness of a nation and its moral progress can be judged by the way its animals are treated” Gandhi

01-08-2010, 03:30 PM	#59
1950 GMC Registered User Join Date: Jul 2009 Location: Bakersfield CA Posts: 113	Re: Project "Poison Ivy" 54 GMC Now those must of been the days.... I wish we had that kind of art on our planes today, but of course someone would complain and we would have to take it off.... Thanks for sharing. __________________ _____________________________________________ Thanks, Garrett My 1950 GMC Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=351867 My 1950 GMC Photobucket Account: http://s565.photobucket.com/albums/ss95/1950GMC/

01-08-2010, 03:35 PM	#60
c10addict Registered User Join Date: Aug 2007 Location: pittsburgh pa Posts: 1,970	Re: Project "Poison Ivy" 54 GMC Thanks thats awesome!! __________________ 68 C10 Shorty TPI,Bagged, and all the good stuff. Classic trucks feature June 06, On the cover of Jegs Christmas Catalog 08 67 C10 Shorty Shop truck project Bagged and Z'd under destruction and getting nowhere fast. 64 C10 Shop Truck/Daily driver, Bagged, Dropmember, SOLD!!!! Gone but not forgotten.. 54 GMC under the knife getting a S10 chassis swap and bagged. See my build thread... 07 GMC Sierra 5/7 drop, 22's and 24's Air ride on my mind.. http://67-72chevytrucks.com/vboard/s...d.php?t=339340 See pics of my trucks in my profile

01-22-2010, 01:45 AM	#61
99 to Life Registered User Join Date: Jan 2010 Location: Titusville, PA Posts: 3,585	Re: Project "Poison Ivy" 54 GMC c10 addict, hey been following your thread. I am new to the site and just posted my build. I live in Pittsburgh and thought that is dope to see someone else from here on here. I really like your work.

01-25-2010, 06:01 PM	#63
LOW DOUGH I'M TRUCK CRAZY! Join Date: Oct 2006 Location: Sachse, TEXAS Posts: 1,737	Re: Project "Poison Ivy" 54 GMC Look'n good c10! Can't wait to see it all together.

01-26-2010, 11:47 PM	#64
stepside83 Registered User Join Date: Jan 2010 Location: butler pa Posts: 328	Re: Project "Poison Ivy" 54 GMC this truck looks awesome man and i like the 60's era truck you have iv seen it at the church car show that thing is awesome as well, dan told me how youtook a brand new license plate and weathered it to make it match the truck now thats detail nice trucks and nice work bro zac

03-30-2010, 08:17 PM	#65
71'tahoe Registered User Join Date: Feb 2004 Location: lynchburg ohio Posts: 736	Re: Project "Poison Ivy" 54 GMC Updates?!

03-30-2010, 08:48 PM	#66
c10addict Registered User Join Date: Aug 2007 Location: pittsburgh pa Posts: 1,970	Re: Project "Poison Ivy" 54 GMC Sad to say but NO updates.... The shop is SUPER busy and I have had no time to work on my own junk.... We built the Goodguys giveaway car "Boss Snake" but only really had 3 months to build it... Now that its gone we are getting caught up and I will get back on this.... I will be driving it this summer!! Here is a link to our website so you can check out some of our projects.. www.rpm-hotrods.com __________________ 68 C10 Shorty TPI,Bagged, and all the good stuff. Classic trucks feature June 06, On the cover of Jegs Christmas Catalog 08 67 C10 Shorty Shop truck project Bagged and Z'd under destruction and getting nowhere fast. 64 C10 Shop Truck/Daily driver, Bagged, Dropmember, SOLD!!!! Gone but not forgotten.. 54 GMC under the knife getting a S10 chassis swap and bagged. See my build thread... 07 GMC Sierra 5/7 drop, 22's and 24's Air ride on my mind.. http://67-72chevytrucks.com/vboard/s...d.php?t=339340 See pics of my trucks in my profile

06-11-2010, 04:18 PM	#67
packrat42 Registered User Join Date: Sep 2008 Location: Rutherfordton, North Carolina Posts: 328	Re: Project "Poison Ivy" 54 GMC Any more updates... __________________ '72 Nova '71 C10 '63 VW Beetle ...............................____ .................________-\|___\____ ..;.;;.:;:;.,;.\|__(O)___\|____/_(O)\| _______________________________________

01-08-2011, 03:52 PM	#68
cable666guy Registered User Join Date: Sep 2008 Location: Willow Grove, PA Posts: 299	Re: Project "Poison Ivy" 54 GMC Great project...btw, just checked out RPMs website, you guys do awesome work!! You're white p/u is one of my favorites!!

03-08-2011, 09:04 AM	#69
c10addict Registered User Join Date: Aug 2007 Location: pittsburgh pa Posts: 1,970	Re: Project "Poison Ivy" 54 GMC Unfortunately this project has been laying dead! The shop is super busy (good thing) and we are traveling all over the country going to shows.. I got rid of the 64 so I need a driver for the summer.. I am itching to get rolling on it again! Stay tuned.. __________________ 68 C10 Shorty TPI,Bagged, and all the good stuff. Classic trucks feature June 06, On the cover of Jegs Christmas Catalog 08 67 C10 Shorty Shop truck project Bagged and Z'd under destruction and getting nowhere fast. 64 C10 Shop Truck/Daily driver, Bagged, Dropmember, SOLD!!!! Gone but not forgotten.. 54 GMC under the knife getting a S10 chassis swap and bagged. See my build thread... 07 GMC Sierra 5/7 drop, 22's and 24's Air ride on my mind.. http://67-72chevytrucks.com/vboard/s...d.php?t=339340 See pics of my trucks in my profile



Register or Log In To remove these advertisements.

03-11-2011, 12:57 AM	#70
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Project "Poison Ivy" 54 GMC Love it. __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it"

08-20-2011, 10:11 AM	#74
c10addict Registered User Join Date: Aug 2007 Location: pittsburgh pa Posts: 1,970	Re: Project "Poison Ivy" 54 GMC Time to wake this thread up... I pulled the truck out of the garage and drove it to the shop today... Time to make things happen.. I'm excited to get it done.. I would like to have it done for the Ocean City show in the beginning of October.. Pics to follow as I start to get the tin swapped over.. __________________ 68 C10 Shorty TPI,Bagged, and all the good stuff. Classic trucks feature June 06, On the cover of Jegs Christmas Catalog 08 67 C10 Shorty Shop truck project Bagged and Z'd under destruction and getting nowhere fast. 64 C10 Shop Truck/Daily driver, Bagged, Dropmember, SOLD!!!! Gone but not forgotten.. 54 GMC under the knife getting a S10 chassis swap and bagged. See my build thread... 07 GMC Sierra 5/7 drop, 22's and 24's Air ride on my mind.. http://67-72chevytrucks.com/vboard/s...d.php?t=339340 See pics of my trucks in my profile

Register or Log In To remove these advertisements.