CA Tuff Country 2" Cast Iron lift blocks and Superlift square u bolts. BNIB - The 1947 - Present Chevrolet & GMC Truck Message Board Network

'63GENIII · 07-22-2018, 02:09 PM

Cleaning the garage and found these. I went with the 63" springs and hanger on my truck so these were never used.

They are Tuff Country iron or cast steel 2" lift blocks and Superlift U bolts that go with them. Unpainted

U bolts are 9/16" - 2.5" inside dim. x 10" and come with nuts and washers. Painted black.

$40 + the ride. Could probably do a flat rate box on these.

**Jeff's bowtie's** · 07-22-2018, 06:42 PM

I'd do 40 shipped

'63GENIII · 07-22-2018, 07:47 PM

45 shipped and you got a deal Jeff.

**Jeff's bowtie's** · 07-22-2018, 09:22 PM

I'll do that pm your PayPal and I'll get you paid thanks ...Jeff

'63GENIII · 07-23-2018, 02:51 PM

PM sent

**Jeff's bowtie's** · 07-23-2018, 04:08 PM

PayPal sent thanks ....Jeff

'63GENIII · 07-23-2018, 04:34 PM

Payment and address received. Package will go to USPS this evening.

Thanks Jeff

**Jeff's bowtie's** · 07-28-2018, 02:32 PM

Got the blocks and bolts today thanks but the bolts are 1/2" not 9/16" but I'll do something with them thanks

'63GENIII · 07-29-2018, 11:54 AM

Happy that you got them Jeff.

I didn't measure them before they left but I got the 9/16" or .563 in. from looking up the Skyjacker PN.

If you can use 'em, great. If they're gonna be paperweights on your bench, LMK and we'll figure something out to make it right.

Chris

**Jeff's bowtie's** · 07-29-2018, 04:42 PM

That's fine I'll use them on a 72 they had 1/2" bolts thanks

07-22-2018, 02:09 PM	#1
'63GENIII Registered User Join Date: Sep 2008 Location: San Carlos, Ca. Posts: 3,048	Tuff Country 2" Cast Iron lift blocks and Superlift square u bolts. BNIB Cleaning the garage and found these. I went with the 63" springs and hanger on my truck so these were never used. They are Tuff Country iron or cast steel 2" lift blocks and Superlift U bolts that go with them. Unpainted U bolts are 9/16" - 2.5" inside dim. x 10" and come with nuts and washers. Painted black. $40 + the ride. Could probably do a flat rate box on these. Attached Images __________________ Chris '63 k15 long step Vortec 7.4 - L29 Blackbear tune, Five 0 Motorsports injectors, Chris Straub Cam, NV4500, divorced 205 52" front and 63" rear spring swap D44 / 14bff - disc axles Milemarker 9K and 10.5K hydraulic winches 63" & B52 Spring Install http://67-72chevytrucks.com/vboard/s...ng+swap+thread NV4500 Reverse Build Thread http://67-72chevytrucks.com/vboard/s...=reverse+build L29 - 7.4 Vortec Build http://67-72chevytrucks.com/vboard/s...&highlight=L29

07-22-2018, 06:42 PM	#2
Jeff's bowtie's Senior Member Join Date: Jan 2015 Location: Kearneysville Wv Posts: 3,938	Re: Tuff Country 2" Cast Iron lift blocks and Superlift square u bolts. BNIB I'd do 40 shipped

07-22-2018, 07:47 PM	#3
'63GENIII Registered User Join Date: Sep 2008 Location: San Carlos, Ca. Posts: 3,048	Re: Tuff Country 2" Cast Iron lift blocks and Superlift square u bolts. BNIB 45 shipped and you got a deal Jeff. __________________ Chris '63 k15 long step Vortec 7.4 - L29 Blackbear tune, Five 0 Motorsports injectors, Chris Straub Cam, NV4500, divorced 205 52" front and 63" rear spring swap D44 / 14bff - disc axles Milemarker 9K and 10.5K hydraulic winches 63" & B52 Spring Install http://67-72chevytrucks.com/vboard/s...ng+swap+thread NV4500 Reverse Build Thread http://67-72chevytrucks.com/vboard/s...=reverse+build L29 - 7.4 Vortec Build http://67-72chevytrucks.com/vboard/s...&highlight=L29

07-22-2018, 09:22 PM	#4
Jeff's bowtie's Senior Member Join Date: Jan 2015 Location: Kearneysville Wv Posts: 3,938	Re: Tuff Country 2" Cast Iron lift blocks and Superlift square u bolts. BNIB I'll do that pm your PayPal and I'll get you paid thanks ...Jeff

07-23-2018, 02:51 PM	#5
'63GENIII Registered User Join Date: Sep 2008 Location: San Carlos, Ca. Posts: 3,048	Re: Tuff Country 2" Cast Iron lift blocks and Superlift square u bolts. BNIB PM sent __________________ Chris '63 k15 long step Vortec 7.4 - L29 Blackbear tune, Five 0 Motorsports injectors, Chris Straub Cam, NV4500, divorced 205 52" front and 63" rear spring swap D44 / 14bff - disc axles Milemarker 9K and 10.5K hydraulic winches 63" & B52 Spring Install http://67-72chevytrucks.com/vboard/s...ng+swap+thread NV4500 Reverse Build Thread http://67-72chevytrucks.com/vboard/s...=reverse+build L29 - 7.4 Vortec Build http://67-72chevytrucks.com/vboard/s...&highlight=L29

07-23-2018, 04:08 PM	#6
Jeff's bowtie's Senior Member Join Date: Jan 2015 Location: Kearneysville Wv Posts: 3,938	Re: Tuff Country 2" Cast Iron lift blocks and Superlift square u bolts. BNIB PayPal sent thanks ....Jeff

07-23-2018, 04:34 PM	#7
'63GENIII Registered User Join Date: Sep 2008 Location: San Carlos, Ca. Posts: 3,048	Re: Tuff Country 2" Cast Iron lift blocks and Superlift square u bolts. BNIB Payment and address received. Package will go to USPS this evening. Thanks Jeff __________________ Chris '63 k15 long step Vortec 7.4 - L29 Blackbear tune, Five 0 Motorsports injectors, Chris Straub Cam, NV4500, divorced 205 52" front and 63" rear spring swap D44 / 14bff - disc axles Milemarker 9K and 10.5K hydraulic winches 63" & B52 Spring Install http://67-72chevytrucks.com/vboard/s...ng+swap+thread NV4500 Reverse Build Thread http://67-72chevytrucks.com/vboard/s...=reverse+build L29 - 7.4 Vortec Build http://67-72chevytrucks.com/vboard/s...&highlight=L29

07-28-2018, 02:32 PM	#8
Jeff's bowtie's Senior Member Join Date: Jan 2015 Location: Kearneysville Wv Posts: 3,938	Re: Tuff Country 2" Cast Iron lift blocks and Superlift square u bolts. BNIB Got the blocks and bolts today thanks but the bolts are 1/2" not 9/16" but I'll do something with them thanks

07-29-2018, 11:54 AM	#9
'63GENIII Registered User Join Date: Sep 2008 Location: San Carlos, Ca. Posts: 3,048	Re: Tuff Country 2" Cast Iron lift blocks and Superlift square u bolts. BNIB Happy that you got them Jeff. I didn't measure them before they left but I got the 9/16" or .563 in. from looking up the Skyjacker PN. If you can use 'em, great. If they're gonna be paperweights on your bench, LMK and we'll figure something out to make it right. Chris __________________ Chris '63 k15 long step Vortec 7.4 - L29 Blackbear tune, Five 0 Motorsports injectors, Chris Straub Cam, NV4500, divorced 205 52" front and 63" rear spring swap D44 / 14bff - disc axles Milemarker 9K and 10.5K hydraulic winches 63" & B52 Spring Install http://67-72chevytrucks.com/vboard/s...ng+swap+thread NV4500 Reverse Build Thread http://67-72chevytrucks.com/vboard/s...=reverse+build L29 - 7.4 Vortec Build http://67-72chevytrucks.com/vboard/s...&highlight=L29

07-29-2018, 04:42 PM	#10
Jeff's bowtie's Senior Member Join Date: Jan 2015 Location: Kearneysville Wv Posts: 3,938	Re: Tuff Country 2" Cast Iron lift blocks and Superlift square u bolts. BNIB That's fine I'll use them on a 72 they had 1/2" bolts thanks



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.