KS Chevy GMC Bucket Seat Floor Mounting Brackets - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ihssalky · 12-31-2012, 04:57 AM

I will take a set. Pm payment info please
Posted via Mobile Device

SS Tim · 12-31-2012, 06:22 PM

Post #15 has the payment info in full.

mark57 · 01-01-2013, 12:28 PM

I will take a set if still available
Posted via Mobile Device

1972SUPERSB · 01-07-2013, 01:44 AM

Please put me in line for a set. I will send a personal check if that is ok?
Posted via Mobile Device

**RogerKoop** · 01-07-2013, 09:21 AM

Quote:

Originally Posted by 1972SUPERSB

Please put me in line for a set. I will send a personal check if that is ok?
Posted via Mobile Device

That works for me. Send to 6975 Mize RD, Shawnee, KS 66226.

Thanks Roger Koop

humco · 01-07-2013, 10:29 AM

I'll take two sets, send me payment info
Posted via Mobile Device

rpatowers · 01-07-2013, 11:54 AM

I'd like a set. I tried calling you this morning and left a message on your answering machine. I will try to call you this afternoon.

Thanks!

Roy

**FIREBALL** · 01-12-2013, 01:11 PM

Got mine recently, bump for ya Roger ......Thanks Kurt

**chevy71super** · 01-12-2013, 01:54 PM

Any more left? Would like a set. Thank you, Doug

**RogerKoop** · 01-12-2013, 09:11 PM

Quote:

Originally Posted by chevy71super

Any more left? Would like a set. Thank you, Doug

Yes I have some sets left

rpatowers · 01-16-2013, 07:47 PM

I received the brackets (thank you!) and I have a few questions:

1. Two of the brackets are angled and, I presume, are supposed to be bolted on to a support that runs underneath the floor. However, the space there is so tight I can't get a drill into position to drill the holes. Do you have any suggestions? Is it necessary to bolt these brackets on to the floor support?

2. You sent me brackets for the rear bolts on both the driver and pasenger side seats. What am I supposed to use for the front bolts on both seats? I realize that one of the front bolts on the passenger seat is bolted into an existing bracket. But what do I use for the other front bolts? Do they require bracing?

Some posts have discussed the need for bracing the floor when installing bucket seats into a bench seat cab. They have reported that floors have stretched and cracked if not properly braced. (See post #37 at http://67-72chevytrucks.com/vboard/s...d.php?t=516328) That is why I am concerned with installing the rear brackets without bolting them to the support that runs under the seat and not having brackets to screw the front bolts in to.

Thank you!

**RogerKoop** · 01-18-2013, 10:04 AM

Quote:

Originally Posted by rpatowers

I received the brackets (thank you!) and I have a few questions:

1. Two of the brackets are angled and, I presume, are supposed to be bolted on to a support that runs underneath the floor. However, the space there is so tight I can't get a drill into position to drill the holes. Do you have any suggestions? Is it necessary to bolt these brackets on to the floor support?

2. You sent me brackets for the rear bolts on both the driver and pasenger side seats. What am I supposed to use for the front bolts on both seats? I realize that one of the front bolts on the passenger seat is bolted into an existing bracket. But what do I use for the other front bolts? Do they require bracing?

Some posts have discussed the need for bracing the floor when installing bucket seats into a bench seat cab. They have reported that floors have stretched and cracked if not properly braced. (See post #37 at http://67-72chevytrucks.com/vboard/s...d.php?t=516328) That is why I am concerned with installing the rear brackets without bolting them to the support that runs under the seat and not having brackets to screw the front bolts in to.

Thank you!

As for question 1, all the trucks that we have seen bucket seats, none of them used the bolt in the support that runs underneath the floor. See attached photo of passenger side bracket.

Question 2. The front bucket mounting just used a square nut welded to the floor. No additional floor support brackets was used except for what was used for the bench seat. I will take some photos of the front mounting and add them later

ChevyCruizer · 01-18-2013, 12:03 PM

I'll take a set. Gonna get the payment address from inside the thread and mail you a check today.

Thanks,

John

**425HP409** · 01-19-2013, 11:22 PM

I will take a set, will mail check on Monday.
Charles
Posted via Mobile Device

**RogerKoop** · 01-20-2013, 03:58 AM

Quote:

Originally Posted by 425HP409

I will take a set, will mail check on Monday.
Charles
Posted via Mobile Device

I'll put a set back for you.

67 Chevy PU · 02-28-2013, 06:35 PM

Hey Rodger, need a set of your brkt's, talk to you at Wichita, Ks swap meet, whats it going to cost me shipped to 67101, need payment info to.
Thanks Terry

Lejuch · 03-04-2013, 10:57 PM

Still have any sets of brackets? If so, I'll take a set
Posted via Mobile Device

**RogerKoop** · 03-05-2013, 09:07 AM

Quote:

Originally Posted by Lejuch

Still have any sets of brackets? If so, I'll take a set
Posted via Mobile Device

Yes I still have some sets left.

**RogerKoop** · 06-04-2013, 09:41 AM

Quote:

Originally Posted by RogerKoop

Yes I still have some sets left.

ttt

octane · 06-19-2013, 10:10 PM

Roger,

Do you still have some sets left? If so, I would like a set.

**RogerKoop** · 06-20-2013, 07:31 AM

Quote:

Originally Posted by octane

Roger,

Do you still have some sets left? If so, I would like a set.

Yes I still have them.

I accept MO, Checks or Credit Cards Over the phone.

For Paypal add 3% for the ride or send as gift.

octane · 06-20-2013, 09:09 PM

Thanks, I will put a check in the mail tomorrow.

Chad

**davischevy** · 06-20-2013, 10:27 PM

Quote:

Originally Posted by RogerKoop

Yes I still have them.

I accept MO, Checks or Credit Cards Over the phone.

For Paypal add 3% for the ride or send as gift.

I'll be putting a check in the mail for a set.

Thanks,
Larry

**RogerKoop** · 06-21-2013, 09:28 AM

Quote:

Originally Posted by davischevy

I'll be putting a check in the mail for a set.

Thanks,
Larry

I put a set back. thanks

68 TLC-10 · 06-21-2013, 10:10 AM

I'll take a set. Let me know where to send the check.

12-31-2012, 04:57 AM	#26
ihssalky Registered User Join Date: Sep 2012 Location: washington pa Posts: 217	Re: Chevy GMC Bucket Seat Floor Mounting Brackets I will take a set. Pm payment info please Posted via Mobile Device

12-31-2012, 06:22 PM	#27
SS Tim Registered User Join Date: Aug 2010 Location: Edwards, CA Posts: 7,504	Re: Chevy GMC Bucket Seat Floor Mounting Brackets Post #15 has the payment info in full. __________________ Thanks, Tim * VIN/Model Decoders * Power Team Charts (engine/transmission/gear ratio) * Post Your Pickup SPID Blazer SPID Suburban/Panel SPID * RTFM ... Read The Factory Manuals... download 'em here Highlanders Do you have a 1972 Plaid Pickup? Plaid Blazer ** Plaid Suburban

01-01-2013, 12:28 PM	#28
mark57 Registered User Join Date: Aug 2008 Location: Mansfield, OH Posts: 130	Re: Chevy GMC Bucket Seat Floor Mounting Brackets I will take a set if still available Posted via Mobile Device __________________ 1969 C10 SWB Ready for Paint 2006 Trailblazer SS AWD 1986 Toyota MR2 for Autocross

01-07-2013, 01:44 AM	#29
1972SUPERSB Registered User Join Date: Sep 2012 Location: San Antonio, TX Posts: 1,026	Re: Chevy GMC Bucket Seat Floor Mounting Brackets Please put me in line for a set. I will send a personal check if that is ok? Posted via Mobile Device __________________ Jeff 1972 Cheyenne Super SWB 350, Auto, Bucket Seats w/Console, Tach, Factory A/C, P/S ,P/B, Tilt 1998 Chevy 1500 Ext Cab 5.7, Pewter w/blue interior

01-07-2013, 10:29 AM	#31
humco Registered User Join Date: Sep 2011 Location: vacaville Ca Posts: 88	Re: Chevy GMC Bucket Seat Floor Mounting Brackets I'll take two sets, send me payment info Posted via Mobile Device

01-07-2013, 11:54 AM	#32
rpatowers Registered User Join Date: Dec 2004 Location: Hayward, CA Posts: 124	Re: Chevy GMC Bucket Seat Floor Mounting Brackets I'd like a set. I tried calling you this morning and left a message on your answering machine. I will try to call you this afternoon. Thanks! Roy

01-12-2013, 01:11 PM	#33
FIREBALL (007) aka Houdini Join Date: Mar 2010 Location: ROCKMART/ROME GA Posts: 354	Re: Chevy GMC Bucket Seat Floor Mounting Brackets Got mine recently, bump for ya Roger ......Thanks Kurt __________________ Live life one day at a time!

01-12-2013, 01:54 PM	#34
chevy71super Registered User Join Date: Jan 2002 Location: So Cal Posts: 658	Re: Chevy GMC Bucket Seat Floor Mounting Brackets Any more left? Would like a set. Thank you, Doug __________________ 71 Cheyenne Super 4X4 SB 72 Cheyenne Super 4X4 SB 72 Cheyenne 4X4 SB

01-16-2013, 07:47 PM	#36
rpatowers Registered User Join Date: Dec 2004 Location: Hayward, CA Posts: 124	Re: Chevy GMC Bucket Seat Floor Mounting Brackets I received the brackets (thank you!) and I have a few questions: 1. Two of the brackets are angled and, I presume, are supposed to be bolted on to a support that runs underneath the floor. However, the space there is so tight I can't get a drill into position to drill the holes. Do you have any suggestions? Is it necessary to bolt these brackets on to the floor support? 2. You sent me brackets for the rear bolts on both the driver and pasenger side seats. What am I supposed to use for the front bolts on both seats? I realize that one of the front bolts on the passenger seat is bolted into an existing bracket. But what do I use for the other front bolts? Do they require bracing? Some posts have discussed the need for bracing the floor when installing bucket seats into a bench seat cab. They have reported that floors have stretched and cracked if not properly braced. (See post #37 at http://67-72chevytrucks.com/vboard/s...d.php?t=516328) That is why I am concerned with installing the rear brackets without bolting them to the support that runs under the seat and not having brackets to screw the front bolts in to. Thank you!

01-18-2013, 12:03 PM	#38
ChevyCruizer 17's too small Join Date: Oct 2004 Location: Las Vegas, NV Posts: 335	Re: Chevy GMC Bucket Seat Floor Mounting Brackets I'll take a set. Gonna get the payment address from inside the thread and mail you a check today. Thanks, John __________________ 68 C10 SWB SS 5 lug power disc brake conversion 2.5 inch drop spindles van tilt column Air Ride Technologies Cool Ride air bag kits Performance Online tubular upper control arms and shock relocator kits ECE super track panhard bar 1 piece side windows

01-19-2013, 11:22 PM	#39
425HP409 425hp409 Join Date: Oct 2008 Location: Prosper Texas Posts: 832	Re: Chevy GMC Bucket Seat Floor Mounting Brackets I will take a set, will mail check on Monday. Charles Posted via Mobile Device __________________ Charles 68 SWB, Dad bought new, now 396 & factory ac 64 Impala SS, 409 425HP, 4 speed AC 64 Bel Air Wagon, 400 Small Block 57 Bel Air all original 283 w/Factory Air 77 GMC Sprint, 454/425HP 67 Olds 442, all original 90 ZR1 Corvette

02-28-2013, 06:35 PM	#41
67 Chevy PU Registered User Join Date: Oct 2012 Location: Maize,KS Posts: 46	Re: Chevy GMC Bucket Seat Floor Mounting Brackets Hey Rodger, need a set of your brkt's, talk to you at Wichita, Ks swap meet, whats it going to cost me shipped to 67101, need payment info to. Thanks Terry

03-04-2013, 10:57 PM	#42
Lejuch Registered User Join Date: Feb 2013 Location: Sherma, TX Posts: 5	Re: Chevy GMC Bucket Seat Floor Mounting Brackets Still have any sets of brackets? If so, I'll take a set Posted via Mobile Device

06-19-2013, 10:10 PM	#45
octane Registered User Join Date: Nov 2012 Location: Lexington, NC Posts: 25	Re: Chevy GMC Bucket Seat Floor Mounting Brackets Roger, Do you still have some sets left? If so, I would like a set. __________________ octane 1971 C10 Cheyenne - Project Truck 1971 C10 Super Cheyenne - Driver

06-20-2013, 09:09 PM	#47
octane Registered User Join Date: Nov 2012 Location: Lexington, NC Posts: 25	Re: Chevy GMC Bucket Seat Floor Mounting Brackets Thanks, I will put a check in the mail tomorrow. Chad __________________ octane 1971 C10 Cheyenne - Project Truck 1971 C10 Super Cheyenne - Driver



Register or Log In To remove these advertisements.

06-21-2013, 10:10 AM	#50
68 TLC-10 Registered User Join Date: Sep 2012 Location: Sun Diego, CA Posts: 19	Re: Chevy GMC Bucket Seat Floor Mounting Brackets I'll take a set. Let me know where to send the check.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.